Optical converter QUATTRO RF + FM / DAB / UHF-FI Televes
KSh55,076.00
This complement of systems with optical LNB, receives an optical signal from TV (1100-1650nm) and recovers the original RF signal. It offers 5 RF outputs: one for terrestrial TV and another 4 for satellite TV in Quattro mode, that is, delivering one of the four TVSAT polarity and band combinations to each connector.
This complement of systems with optical LNB, receives an optical signal from TV (1100-1650nm) and recovers the original RF signal. It offers 5 RF outputs: one for terrestrial TV and another 4 for satellite TV in Quattro mode, that is, delivering one of the four TVSAT polarity and band combinations to each connector.
Stands out for
Switch to regulate the satellite gain in three levels: low, medium and high
RF signal presence indicator LED
Accepts terrestrial TV mix (FM / DAB / UHF)
Reduced size
Main features
Optical connectors FC / PC and type F in RF
Specifications
Reference / Art. Nr. 237003 / OMS44TSN
TVSAT
Bands and polarities MHz HORIZONTAL HIGH: 1100 – 2150 ?15.5V + 22kHz
VERTICAL HIGH: 1100 – 2150 ?14.5V + 22kHz
LOW HORIZONTAL: 950 – 1950 ?15.5V
VERTICAL LOW: 950 – 1950 ?14.5V
Terrestrial band rejection dB 30
Output Level dB?V High Gain: 78
Med Gain: 73
Low Gain: 68
FM / DAB / DTT
Frequency range MHz FM: 88 – 108
DAB: 174 – 240
DTT: 470 – 790
TVSAT rejection dB 35
Output levels dB?V 82 @ 1mux
78 @ 6mux
Optical
Wavelength nm 1100 – 1650
Input power dBm min: -12.2
max: -3
Feeding
Network voltage Vdc 10.5 – 20
Consumption mA 500@10.5V
430 @ 12V
260 @ 20V
Mechanical
Optical input kind FC / PC
Storage temperature ?C -20 … 70
Related products
-
PAU of FO 2 to 4 Outputs: 2 Dca Fibers of 55m….
KSh13,164.00Add to cartDevice enabled as a connection point to a fiber optic network. In ICT environments, and located in the Network Termination Registry (RTR), it acts as a cutting point and test of the optical network. Includes fiber pre-terminated at one end with 2 SC/APC connectors.
-
Add to cartDesigned to act as a distribution point for fiber optic hoses. It is usual to use it in FTTH or FTTR projects, facilitating the interconnection between the own network and the operator’s network (typical installation in the RITI). It allows to install several records jointly, maintaining the possibility of interconnection between them. Up to 48 female-female adapters. Televes 233003
-
SC/APC Optical Receiver/Demultiplexer (-8…+1dBm)…
KSh58,136.00Add to cartThe FTTH receiver captures two satellite signals on a single fiber and demultiplexes them. The first one, in the wavelength 1310nm carries the dCSS satellite channels using an optical LNB (satellite operator SKY) while the second one in 1550nm, carries the DTT lineup plus a satellite offer using a second dish and a static dLNB.
The FTTH receiver has a physical switch that allows to select between dCSS SKY mode and FTA SAT mode. Depending of the selected choice, one of the two satellite signals plus the DTT lineup is delivered in the four RF outputs. In case of dCSS SKY mode, with the use of a single power supply, it powers up the dCSS optical converter (Ref. 237201).
Part of FULL SAT + DTT system to be used together with the FTTH transmitter televes-237301.
Highlights
DIN rail installation: this assembly provides safety and efficiency, as well as saving space, time and cost due its advantage by being able to integrate several electrical devices in an installation with a lower cabling density. It is also possible to mount it screwed on the wall
Distribution mode flexibility: a switch is included to choose between DTT+Satellite IF or DTT+dCSS/Legacy
High sensitivity in 1550 nm
High output voltage in the 4 RF outputs
Eco-Mode powering with dCSS SKY mode selected: if the STB is switched-off, it ceases to power up the dCSS optical converter, just delivering the DTT lineup with a very low power consumption
Features
Compatible with Legacy and dCSS multiswitches
Equipped with a power supply output to feed an optical converter
Very pleasant and compact format
SC/APC and FC/PC optical connectors
F-type RF connectors
Specifications
RF Output
RF connector 4x F-female
Bandwidth MHz 47 … 2150
Impedance Ohm 75
Return losses ?dB > 7,5
Planicity ?dB ? 2,5
Slope dB 1
Self-regulating output level dB?V 78
CNR / CSO / CTB ?dB >49 / >60 / >60
Optical?input / output
Number of ports 1x COM bidirectional
1x GPON bidirectional
Wavelengths nm GPON: 1310 & 1490
COM: 1310 & 1490
COM: 1550
Maximum optical input power dBm 3
Optical input power dBm -10 … +2
Optical return losses dB >40
Optical connectors 1x SC/APC (COM)
1x FC/PC (GPON)
Type of optical device InGaAs pin photodiode
General
Supply voltage V= 12
Internal device consumption mA 80
Output DC pass per output mA 450
Operating temperature ?C -5 … +45
Protection index IP 30
Application example -
Add to cart32-way PLC splitter with SC/APC connectors for optical signals in the 1260 nm-to-1650 nm range.?The T.0X format frame allows rack installation for optical fibre headends. Televes 234601
-
Add to cartComplement to expand the capacity of the ultra-compact terminal enclosure (Ref. 231304), it can house up to 12 additional fibers.
Reviews
There are no reviews yet.