PicoKom 1e/2s EasyF Housing Amplifier: 47-694MHz G 10/16dB…

Home amplifier with 2 outputs with automatic gain regulation, to expand the domestic terrestrial television network.

It incorporates LTE700/5G filtering and input power for preamplifiers or a BOSS system.

Stands out for
Plug&Play, without adjustments: it incorporates automatic gain regulation, without affecting the quality of the signal
Aesthetic and reduced size design: installable in 100x100mm junction boxes
EasyF connection system
High performance integrated switching power supply: reduced consumption (40% less than a standard amplifier)
Fully automated manufacturing and subject to rigorous quality controls
Characteristic
DC pass-through ON/OFF switch, for powering preamplifiers or BOSS systems
Easy assembly, maintaining the minimum bending radius of coaxial cables
screwable on the wall
EasyF connection system: simplicity and savings

The EasyF is an innovative connection concept of the internal conductor of the coaxial cable (live), which is inserted directly into the device, increasing the reliability of the connection. In addition, thanks to the absence of “F” connectors, it is possible to reduce the chassis and secure the connection of two cables with a single screw.

Real time savings: it is possible to speed up the installation, since it is not necessary to carry out the connectorization of the coaxial cables. In addition, the threading process of the connectors on the device, which is sometimes complicated when the space is not enough, is avoided.
Reliability of connection: the clamp that holds the cables prevents the coaxial from coming loose
Cost savings: no additional connector (neither “F” nor “IEC”) needed
Space optimization: inputs and outputs are always located on the same side of the device, avoiding bending coaxial cables and facilitating work inside cabinets and registers
Very simple assembly in three steps: only screwing and unscrewing of the covers is required to connect two cables:

1. Unscrew the cover of the device to access the connection

2. Insert the previously stripped coaxial cables

3. Close the lid and screw to secure the connection

Find out more about the reliability of the EasyF system

With EasyF, the connection of the coaxial cable to the device is carried out by means of an automated system for inserting the live (internal conductor) by contact, without requiring soldering.

Like the first day: the lifetime of the device is increased by eliminating the possible deterioration of the welds over time
Reduced failure rate: generally caused by cold welds
Optimization of electromagnetic behaviour: at high frequencies
Reinforcement of our commitment to the environment: pollution caused by the welding process is eliminated and electricity consumption in production is reduced
Specifications
Departures two
frequency range MHz 47…400 470…694
Max Gain G dB 10 16
Regulation margin
profit Auto Auto
output level EN 50083 IMD3 (2 tones, -35dB) vout dB?V 105 108
DIN45004B 98 101
2 CH’s VHF (DVB-T/T2) 91 –
10 CH’s UHF (DVB-T/T2) – 92
noise figure NF dB 4
Power/Current
max. tickets OFF Vdc/
mA 0/0
ON 12/150
Mains voltage/frequency V~/Hz 220…230 / 50-60
Total AC consumption W 3.7
Pass current DC S/E mA –
Protection index IP twenty
Operating temperature range ?C -5 … +45