Ubiquiti Networks PBE-5AC-400-ISO bridge/repeater 1000 Mbit/s White

PBE-5AC-400-ISO
– effective Ubiquiti interference protection
The Ubiquiti PowerBeam PBE-5AC-400-ISO is an innovative product that
increases RF isolation and eliminates interferences.

The AP/Bridge/CPE type device works in the 802.11ac standard. This results
in achievable 450 Mbps bandwidth in the 5 GHz band.

 
Construction

The use of solid components result in high durability. It can be used at temperatures
ranging from -40 to 70 degrees Celsius. Its outer plastic casing is resistant
to UV radiation.

Work

The device uses an Atheros MIPS 74KC 560 MHz processor. The device uses 64
MB internal memory and 16 MB flash drive memory. The device works in the
5,170 – 5,875 MHz band.

Use

The PBE-5AC-400-ISO interference protection system can be used in locations
with high wave density. It is used to reduce data loss on connectors. The
device is not only efficient but also easy to install and affordable.

airMax AC

The device uses the AirMax AC technology which not only increases its
efficiency but also boosts latency and resistance to interference.

Antenna

The device is equipped with a 25 dBi maximum gain antenna. Increased RF
isolation is combined with interference filtering and RF shielding.

Key features
works in the 5 GHz band
450 Mbps bandwidth
25km range
25 dBi antenna power gain
1,000 Mbit/s maximum data transfer speed
AirMAx AC technology

Comparison
 

  PBE-5AC-300-ISO

PBE-5AC-400-ISO

   PBE-5AC-500-ISO

FREQUENCY 5 GHz 5 GHz 5 GHz
THROUGHPUT 450+ Mbps 450+ Mbps 450+ Mbps
RANGE 20+ km 25+ km 25+ km
ANTENNA GAIN 22 dBi 25 dBi 27 dBi
NETWORKING INTERFACE (1) 10/100/1000 Ethernet Port (1) 10/100/1000
Ethernet Port (1) 10/100/1000 Ethernet Port

Manufacturer’s content

 Read more in the manufacturer’s documentation

 Read the manual

Specifications