Category: TV Distribution
TV Distribution
Showing 151–225 of 1174 results
-
Alcad EM-202 Front plate for bs-112
KSh266.00Add to cartAlcad EM-202 – Serie 907: Front plate for bs-112.
TV-R/SAT frontplate for BS-100 and BS-112 outlet bases.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad EM-210 – Serie 907: Customised front plate for bm/bc.
TV/R customised front plate for outlet BM and BC.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad EM-211 – Serie 907: Custom front plate for bs (not bs-112).
TV-R/TV-R customised front plate for all BS outlet models except BS-100 and BS-112.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad EM-212 – Serie 907: Customised front plate for bs-112.
TV-R/SAT customised front plate for BS-100 and BS-112 outlet bases.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad EP-111 F-f splicer
KSh170.00Add to cartAlcad EP-111 – Serie 908: F-f splicer.
Shielded splicer with two female F connectors which permits the connection of two sections of coaxial cable by means of the splicer and two male F connectors.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad EP-311 – Serie 908: Quick f male to male splicer.
Shielded splicer with two male F connectors. Connected by pushing into the female F connector. Enables cascadable multiswitches to be connected to each other without the use of coaxial cable.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FA-410 Power supply 50 w (230/240 vac)
KSh51,312.00Add to cartAlcad FA-410 – Serie 912: Power supply 50 w (230/240 vac).
Switching power supply, which permits the installation of an amplifier and different modules on the support frame. Power supply with a flat cable of 20 lines for different feed voltages.
Applications
Required for feeding the modules of the equipment.
Characteristics
Protected against power surges, overloads and short-circuits. Zamak chassis with side gills to facilitate proper ventilation. Supplied with power cable.
Downloads
Technical specification
Technical specification
Manuals
– pdf 266.03 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – FA-512 y FA-410 pdf 147.68 KB
Technical specifications
-
Alcad FA-512 Power supply 96 w (90-260 vac) himalaya
KSh81,896.00Add to cartAlcad FA-512 – Serie 912: Power supply 96 w (90-260 vac) himalaya.
Switching power supply for 912-TM himalaya transmodulateurs, which permits the installation of a PA-740 broadband amplifier and different modules on the support frame. An additional power supply can be added to the headend so that it will have a redundant power supply with load balance. Power supply with a flat cable of 10 lines at 12V.
Downloads
Technical specification
Technical specification
Manuals
FA-512 Manual pdf 2.11 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – FA-512 pdf 61.42 KB
Technical specifications
-
Alcad FD-210 Tap-off if 2 out 10db equalized
KSh3,594.00Add to cartAlcad FD-210 – Serie 906: Tap-off if 2 out 10db equalized.
Equalised tap-offs for terrestrial and satellite TV with two tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100 x100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-213 Tap-off if 2 out 12db equalized
KSh3,594.00Add to cartAlcad FD-213 – Serie 906: Tap-off if 2 out 12db equalized.
Equalised tap-offs for terrestrial and satellite TV with two tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100 x100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-219 Tap-off if 2 out 18db equalized
KSh3,594.00Add to cartAlcad FD-219 – Serie 906: Tap-off if 2 out 18db equalized.
Equalised tap-offs for terrestrial and satellite TV with two tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100 x100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-225 Tap-off if 2 out 26db equalized
KSh3,594.00Add to cartAlcad FD-225 – Serie 906: Tap-off if 2 out 26db equalized.
Equalised tap-offs for terrestrial and satellite TV with two tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100 x100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-410 Tap-off if 4 out 10db equalized
KSh4,574.00Add to cartAlcad FD-410 – Serie 906: Tap-off if 4 out 10db equalized.
Equalised tap-offs for terrestrial and satellite TV with four tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100×100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-413 Tap-off if 4 out 13db equalized
KSh4,574.00Add to cartAlcad FD-413 – Serie 906: Tap-off if 4 out 13db equalized.
Equalised tap-offs for terrestrial and satellite TV with four tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100×100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-419 Tap-off if 4 out 19db equalized
KSh4,574.00Add to cartAlcad FD-419 – Serie 906: Tap-off if 4 out 19db equalized.
Equalised tap-offs for terrestrial and satellite TV with four tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100×100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-425 Tap-off if 4 out 26db equalized
KSh4,574.00Add to cartAlcad FD-425 – Serie 906: Tap-off if 4 out 26db equalized.
Equalised tap-offs for terrestrial and satellite TV with four tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100×100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad FF-200 – Serie 904: External power supply everest 24 vdc/1a.
Power supply for Everest amplifiers, 24 V and 1 A. If the amplifier already has a built-in power supply, it can be used as a redundant power supply or as a spare power supply. If the amplifier does not have a built-in power supply, it is used as a spare power supply. EU plug.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – FF-200 pdf 61.41 KB
Technical specifications
-
Read moreAlcad FF-300 – Serie 904: K2 external power supply 24 vdc/ 250 ma.
External power supply for K2 amplifiers. Even though it is included with the amplifiers, it is also sold sepparately as a spare part, to be used for maintainance or repairs.
Provides up to 250 mA at 24V.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – FF-300 pdf 61.35 KB
Technical specifications
-
Alcad FR-900 Lte700 c48, reject filter 60 db
KSh5,808.00Add to cartAlcad FR-900 – Serie 902: Lte700 c48, reject filter 60 db.
Rejection filter for mast, cutting out interference from LTE700, LTE800, GSM and TETRA mobile phone signals. It incorporates a DC path to allow power to be supplied to a preamplifier.
Applications
Suitable for individual and collective terrestrial TV installations affected by the transmission of LTE700 and LTE800 mobile phone signals in the 703-862 MHz band, and by the transmission of GSM and TETRA signals in the 870-960 MHz band. The filter eliminates interference signals before amplification of the TV signals in the head-end of the installation, obtaining a rejection in the LTE700 and LTE800 band of up to -60dB.
Characteristics
Shielded zamak chassis, covered by a weather-resistant plastic casing. Easy to open and close, the chassis can be tilted to facilitate manipulation. The filter can be installed either on a mast, by means of a polyamide clamp, or on a wall. Resistant to sun and water (IP53). F-type connector.
Downloads
Technical specification
Technical specification
Manuals
– pdf 167.07 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
-
Alcad FU-513 Power supply unit 7.5 v for multiswitch
KSh15,196.00Add to cartAlcad FU-513 – Serie 913: Power supply unit 7.5 v for multiswitch.
Power sources feeding LNBs, amplifiers and active multiswitches to obtain the total necessary current for all the elements of the installation, including the LNBs.
Applications
Model FU-612 is used for installations with final and cascadable multiswitches and to supply power to the LNBs. The number of LNBs which can be powered varies, depending on the consumption of the LNBs (2.000mA = 8 LNB x 250mA/LNB). Model FU-513 is used for installations in cascade, and to supply power to amplifiers and active multiswitches.
Characteristics
Switched power sources protected against power surges and short circuits. They include a fuse which the installer can access. Power supply cables are provided for connection to the network and to the multiswitch or amplifier. Power supply jack connector, 9.5mm 2.1mm
Downloads
Technical specification
Technical specification
Manuals
– pdf 389.08 KB
– pdf 375.26 KB
– pdf 151.45 KB
– pdf 619.16 KB
– pdf 275.29 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad FU-612 Power supply unit 18 v for multiswitch
KSh17,134.00Add to cartAlcad FU-612 – Serie 913: Power supply unit 18 v for multiswitch.
Power sources feeding LNBs, amplifiers and active multiswitches to obtain the total necessary current for all the elements of the installation, including the LNBs.
Applications
Model FU-612 is used for installations with final and cascadable multiswitches and to supply power to the LNBs. The number of LNBs which can be powered varies, depending on the consumption of the LNBs (2.000mA = 8 LNB x 250mA/LNB). Model FU-513 is used for installations in cascade, and to supply power to amplifiers and active multiswitches.
Characteristics
Switched power sources protected against power surges and short circuits. They include a fuse which the installer can access. Power supply cables are provided for connection to the network and to the multiswitch or amplifier. Power supply jack connector, 9.5mm 2.1mm
Downloads
Technical specification
Technical specification
Manuals
– pdf 255.88 KB
– pdf 235.3 KB
– pdf 389.08 KB
– pdf 375.26 KB
– pdf 151.45 KB
– pdf 275.29 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Add to cartAlcad HC-095 – Serie 908: Female connect. 9,5 mm shielded.
Curved, shielded ?9.52 mm female IEC connector.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad IM-123 – Serie 909: Current injector 24 vdc 905-zg/zp.
Power injector for preamplifiers, fed from the power supply unit of the equipment via a Faston connector.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad LS-207 – Serie 912: Flat power cable of 20 lines.
Flat power cable of 20 lines, to connect the power 9120105 supply and 11 modules.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad LT-102 Power cable faston to 10 pin male
KSh1,210.00Add to cartAlcad LT-102 – Serie 905: Power cable faston to 10 pin male.
Faston connector adaptor to 10-pin male connector, for adding modules with F-type connectors to the end of equipment with IEC connectors. An LT-107 power supply cable is also required.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad LT-107 10 lines power flat cable
KSh4,610.00Add to cartAlcad LT-107 – Serie 905: 10 lines power flat cable.
Ribbon power cable with 10-pin connectors for 1 power supply unit, 18 modules and control module.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad LT-112 – Serie 905: Power cable faston 10 pin female.
Double faston connector adaptor to 10-pin female connector, for replacing a module with an IEC connector with a module with an F-type connector.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad MC-095 – Serie 908: Male connect. 9,5 mm shielded.
Shielded ?9.52 mm male IEC connector.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad MC-102 – Serie 908: Fast male f connector coax 6.5-7.0 mm.
Male quick F connector to screw onto RG-6 coaxial cable, ?6.5-7.0 mm.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Add to cartAlcad MC-104 – Serie 908: Male f connector to crimp on rg-6 coax.
Male F connector to crimp on RG-6 coaxial, ? 7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 85.49 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad MC-202 – Serie 908: Male f connector for coax rg-11.
Shielded male F-type connector for screwing on to RG-11 coaxial cable of ?10.0 to ?10.4 mm. The connector is inserted in the coaxial cable using the HE-100 assembly tool.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad MC-302 – Serie 908: Male f connector coax. ? 6.9 – 7.2 mm.
Male F coonector to screw onto RG-6 coaxial cable, ?6.9 – 7.2 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 85.49 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad MC-304 – Serie 908: F compres. connector male coax 6,8-7,2mm.
Shielded male F-type compression connector for RG-6 coaxial cable of ?6.9 to ?7.2 mm. The connector is inserted in the coaxial cable using the HE-100 assembly tool and is pressed onto the cable using the HE-201 crimping tool.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad MD-104 – Serie 909: Indct.mix/split. (2 outputs).
Two input multiplexer to connect to the input of a video. It can be used as a two input splitter. Female IEC input connector and male IEC output connector to connect to the equipment.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad MD-310 Multistandard biii modulator
KSh17,770.00Add to cartAlcad MD-310 – Serie 951: Multistandard biii modulator.
TV modulator with mono audio, which generates an analogue TV channel from the audio and video signals. The generated channel is mixed with the rest of the channels of the TV installation. Available in different bands, with different standards and channel tables.
Applications
It modulates the audio and video signal of a satellite receiver, DVD, video or surveillance camera, in order to distribute it in the TV installation of the house. The audio and video signals are obtained from the scart connector of the video.
Characteristics
The output channel can be selected by means of switches. Essential features of this equipment are the high carrier to noise ratio together with a very reduced spurious level in the band. Modulation in DSB double side band. F type connector and RCA connector for audio/ video.
Downloads
Technical specification
Technical specification
Manuals
– pdf 715.87 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Alcad MD-410 Multistandard uhf modulator
KSh17,770.00Add to cartAlcad MD-410 – Serie 951: Multistandard uhf modulator.
TV modulator with mono audio, which generates an analogue TV channel from the audio and video signals. The generated channel is mixed with the rest of the channels of the TV installation. Available in different bands, with different standards and channel tables.
Applications
It modulates the audio and video signal of a satellite receiver, DVD, video or surveillance camera, in order to distribute it in the TV installation of the house. The audio and video signals are obtained from the scart connector of the video.
Characteristics
The output channel can be selected by means of switches. Essential features of this equipment are the high carrier to noise ratio together with a very reduced spurious level in the band. Modulation in DSB double side band. F type connector and RCA connector for audio/ video.
Downloads
Technical specification
Technical specification
Manuals
– pdf 715.87 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Alcad MD-531 Modulator wideband bg standard stereo
KSh20,820.00Add to cartAlcad MD-531 – Serie 951: Modulator wideband bg standard stereo.
TV modulator with stereo audio, which generates an analogue TV channel from the audio and video signals. The generated channel is mixed with the rest of the channels of the TV installation. It modulates the output channel for any channel of the terrestrial band based on the the B/G CCIR standard.
Applications
It modulates the audio and video signal of a satellite receiver, DVD, video or surveillance camera, in order to distribute it in the TV installation of the house. The audio and video signals are obtained from the scart connector of the video.
Characteristics
The output channel can be selected by means of switches. Essential features of this equipment are the high carrier to noise ratio together with a very reduced spurious level in the band. Modulation in DSB double side band. F type connector and RCA connector for audio/ video.
Downloads
Technical specification
Technical specification
Manuals
– pdf 243.71 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Add to cartAlcad ME-213 – Serie 902: Double multiplexer tv-sat for indoor use.
Double multiplexer that combines the terrestrial TV and FM radio signals with two separate satellite IF signal from two LNBs. The two resulting signals are distributed each one a single coaxial cable. It can be also used as a diplexer for terrestrial TV and satellite IF signals coming from a single cable. SIngle and double multiplexer
Applications
Designed for TV installations with two coaxial cables in which distribution to the dwellings is performed with two coaxial cables. SMATV satellite and terrestrial TV installations. It is used to combine the signals after amplifying at the head of the installation, or it is used as a separator to distribute terrestrial and satellite TV signals to different points.
Characteristics
Shielded zamak chassis and type F connectors. DC Path to the SAT input to power and switch the LNB.
Accessories
9120039 CM-004 F male connector for coaxial ?6.6 mm. 9080023 MC-302 F male connector for coaxial ?7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 166.76 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Alcad ME-214 Multiplexer 2 inputs, tv-sat
KSh3,920.00Add to cartAlcad ME-214 – Serie 902: Multiplexer 2 inputs, tv-sat.
Multiplexer that combines the terrestrial TV and FM radio signals with the satellite IF signal from the LNB. The resulting signal is distributed by a single coaxial cable. It can be also used as a separator for terrestrial TV and satellite IF signals coming from a single cable.
Applications
Satellite and terrestrial TV installations of collective type. It is used to combine the signals after amplifying at the head of the installation, or it is used as a separator to distribute terrestrial and satellite TV signals to different points.
Characteristics
Shielded zamak chassis and type F connectors. DC Path to the SAT input to power and switch the LNB.
Accessories
9120039 CM-004 F male connector for coaxial ?6.6 mm. 9080023 MC-302 F male connector for coaxial ?7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 166.76 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Alcad MM-200 Multiplexer tv/fm-tv/fm mast
KSh4,090.00Add to cartAlcad MM-200 – Serie 902: Multiplexer tv/fm-tv/fm mast.
2 input multiplexer which can be used as a 2 output terrestrial TV splitter, for mast installation (see page 44).
Downloads
Technical specification
Technical specification
Manuals
– pdf 126.41 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-200 pdf 64.01 KB
Technical specifications
-
Alcad MM-207 Multiplexer uhf-vhf/fm mast
KSh2,820.00Add to cartAlcad MM-207 – Serie 902: Multiplexer uhf-vhf/fm mast.
Multiplexers for masts, universal or by bands, of two inputs. They mix the signals from several antennas in a single coaxial cable. They incorporate switchable DC paths to permit the feeding of a preamplifier.
Applications
Individual digital and analogue terrestrial TV installations. In installations where the reception levels are adequate (60 to 75 dB?V) the signals of all the antennas can be combined to distribute them in the building with a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Fixed to the mast by means of a polyamide clamp. F-type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for ?6.6mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm
Downloads
Technical specification
Technical specification
Manuals
– pdf 126.41 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-207 pdf 64.01 KB
Technical specifications
-
Alcad MM-214 Multiplexer/splitter tv-sat
KSh5,372.00Add to cartAlcad MM-214 – Serie 902: Multiplexer/splitter tv-sat.
Multiplexers for masts which combine the signals of terrestrial TV and FM radio with the IF satellite signal from the LNB. The resulting signal is distributed by a single coaxial cable.
Applications
Individual or SMATV installations. The mast multiplexer enables the distribution of the satellite signal to the interior of the building when it is not possible to add a new cable for the satellite.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Fixed to the mast by means of a polyamide clamp. F-type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for ?6.6mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm
Downloads
Technical specification
Technical specification
Manuals
– pdf 166.76 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-214 pdf 64.01 KB
Technical specifications
-
Add to cartAlcad MM-303 – Serie 902: Multiplexer 3 inp, uhf-biii-fm with dc.
Multiplexers for masts, or by bands, of three inputs. They mix the signals from several antennas in a single coaxial cable.
Applications
Individual digital and analogue terrestrial TV installations. In installations where the reception levels are adequate (60 to 75 dB?V) the signals of all the antennas can be combined to distribute them in the building with a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Fixed to the mast by means of a polyamide clamp. F-type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for ?6.6mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 126.41 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-303 pdf 64.01 KB
Technical specifications
-
Alcad MM-307 Multiplexer uhf-uhf-vhf/fm mast
KSh3,618.00Add to cartAlcad MM-307 – Serie 902: Multiplexer uhf-uhf-vhf/fm mast.
Multiplexers for masts, or by bands, of three inputs. They mix the signals from several antennas in a single coaxial cable.
Applications
Individual digital and analogue terrestrial TV installations. In installations where the reception levels are adequate (60 to 75 dB?V) the signals of all the antennas can be combined to distribute them in the building with a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Fixed to the mast by means of a polyamide clamp. F-type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for ?6.6mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 126.41 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-307 pdf 64.01 KB
Technical specifications
-
Alcad MU-310 5×8 final multiswitch
KSh43,078.00Add to cartAlcad MU-310 – Serie 913: 5×8 final multiswitch.
Multiswitches for 4 polarities and terrestrial TV with 4, 8 or 16 outputs, for star-shaped installations. The tap outputs are amplified on the IF satellite band. Must be powered from each individual receiver to feed the switching and amplification of each tap output. To feed the LNBs, the FU-612 power supply unit is used.
Applications
Individual or SMATV installations, up to 16 TV outlets. Starshaped distribution from the multiswitch, with a single coaxial cable to each TV outlet. The multiswitch distributes a satellite polarity together with the terrestrial TV for each output. The polarity is selected from the individual receiver by means of the LNB control signals.
Characteristics
Return path included from 5 to 65 MHz. Shielded zamak chassis with plastic supports. F type connectors. Two power supply jacks, 9.5mm x 2.1mm. Distances of more than 75 m between multiswitch and outlet.
Downloads
Technical specification
Technical specification
Manuals
– pdf 186.18 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-320 5×8 cascadable multiswitch
KSh34,626.00Add to cartAlcad MU-320 – Serie 913: 5×8 cascadable multiswitch.
Multiswitches for 4 polarities and terrestrial TV with 8 or 16 outputs, for installations in cascade. The tap outputs are amplified on the IF satellite band. Power must be supplied from each individual receiver to feed the switching and amplification of each tap output.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 120 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 120 outlets and distributing the 4 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 5 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. The polarity is selected from the individual receiver using the LNB control signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 275.29 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-321 Cascadable multiswitch, 5×8 actif
KSh42,510.00Add to cartAlcad MU-321 – Serie 913: Cascadable multiswitch, 5×8 actif.
Multiswitches for 4 polarities and terrestrial TV with 4, 8 or 16 outputs, for installations in cascade. The inputs of the 4 polarities and the terrestrial TV are amplified. The tap outlets are amplified on the IF satellite band. Power must be supplied from the inputs or the through outputs to feed the built-in line amplifiers. Must be powered from each individual receiver to feed the switching and amplification of each tap output. To feed the active multiswitches, the FU-513 power unit is used; it is connected to the AU-620 amplifier of the cascade.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 120 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 120 outlets and distributing the 4 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 5 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. The polarity is selected from the individual receiver using the LNB control signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F-type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 275.29 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-330 9×8 final multiswitch
KSh53,184.00Add to cartAlcad MU-330 – Serie 913: 9×8 final multiswitch.
Multiswitches for 8 polarities and terrestrial TV with 4, 8 or 16 outputs, for star-shaped installations. The tap outputs are amplified on the IF satellite and terrestrial TV bands. The tap outputs are amplified on the IF satellite band. Must be powered from each individual receiver to feed the switching and amplification of each tap output. To feed the LNBs, the FU-612 power supply unit is used.
Applications
Individual or SMATV installations, up to 16 TV outlets. Star- haped distribution from the multiswitch, with a single coaxial cable to each TV outlet. The multiswitch distributes a satellite polarity together with the terrestrial TV for each output. The polarity is selected from the individual receiver by means of the LNB and tone burst control signals, or the DiSEqC (Version 1.0 and later) signal.
Characteristics
Return path included from 5 to 65 MHz. Shielded zamak chassis with plastic supports. F type connectors. Power supply jack, 9.5mm x 2.1mm. Distances of more than 75 m between multiswitch and outlet.
Downloads
Technical specification
Technical specification
Manuals
– pdf 255.88 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-340 9×8 cascadable multiswitch
KSh50,964.00Add to cartAlcad MU-340 – Serie 913: 9×8 cascadable multiswitch.
Multiswitches for 4 polarities and terrestrial TV with 8 or 16 outputs, for installations in cascade. The tap outputs are amplified on the IF satellite band. Power must be supplied from each individual receiver to feed the switching and amplification of each tap output.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 120 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 120 outlets and distributing the 4 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 5 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. The polarity is selected from the individual receiver using the LNB control signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 251.1 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-341 Cascadable multiswitch, 9×8 actif
KSh57,054.00Add to cartAlcad MU-341 – Serie 913: Cascadable multiswitch, 9×8 actif.
Multiswitches for 8 and 16 polarities and terrestrial TV with 8 or 16 outputs, for installations in cascade. The inputs of the 8 polarities and the terrestrial TV are amplified. For 16 polarities, 2 stacked multiswitches of 8 polarities are installed and an external DiSEqC switch (CN-611) for each output. The tap outlets are amplified on the IF satellite band. Power must be supplied from the inputs or the through outputs to feed the built-in line amplifiers. Power must be supplied from each individual receiver to feed the switching and amplification of each tap output. To feed the active multiswitches, the FU-513 power unit is used; it is connected to the AU-620 amplifier of the cascade.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 128 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 128 outlets and distributing the 8 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 9 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. For 8 polarities, the polarity is selected from the individual receiver using the LNB control signals and tone burst or using the DiSEqC signals (version 1.0 or higher); for 16 polarities, polarity is selected using only the DiSEqC signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F-type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 251.1 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-610 5×16 final multiswitch
KSh75,704.00Add to cartAlcad MU-610 – Serie 913: 5×16 final multiswitch.
Multiswitches for 4 polarities and terrestrial TV with 4, 8 or 16 outputs, for star-shaped installations. The tap outputs are amplified on the IF satellite band. Must be powered from each individual receiver to feed the switching and amplification of each tap output. To feed the LNBs, the FU-612 power supply unit is used.
Applications
Individual or SMATV installations, up to 16 TV outlets. Starshaped distribution from the multiswitch, with a single coaxial cable to each TV outlet. The multiswitch distributes a satellite polarity together with the terrestrial TV for each output. The polarity is selected from the individual receiver by means of the LNB control signals.
Characteristics
Return path included from 5 to 65 MHz. Shielded zamak chassis with plastic supports. F type connectors. Two power supply jacks, 9.5mm x 2.1mm. Distances of more than 75 m between multiswitch and outlet.
Downloads
Technical specification
Technical specification
Manuals
– pdf 186.18 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-620 5×16 cascadable multiswitch
KSh57,206.00Add to cartAlcad MU-620 – Serie 913: 5×16 cascadable multiswitch.
Multiswitches for 4 polarities and terrestrial TV with 8 or 16 outputs, for installations in cascade. The tap outputs are amplified on the IF satellite band. Power must be supplied from each individual receiver to feed the switching and amplification of each tap output.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 120 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 120 outlets and distributing the 4 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 5 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. The polarity is selected from the individual receiver using the LNB control signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 275.29 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-621 Cascadable multiswitch, 5×16 actif
KSh65,092.00Add to cartAlcad MU-621 – Serie 913: Cascadable multiswitch, 5×16 actif.
Multiswitches for 4 polarities and terrestrial TV with 4, 8 or 16 outputs, for installations in cascade. The inputs of the 4 polarities and the terrestrial TV are amplified. The tap outlets are amplified on the IF satellite band. Power must be supplied from the inputs or the through outputs to feed the built-in line amplifiers. Must be powered from each individual receiver to feed the switching and amplification of each tap output. To feed the active multiswitches, the FU-513 power unit is used; it is connected to the AU-620 amplifier of the cascade.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 120 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 120 outlets and distributing the 4 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 5 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. The polarity is selected from the individual receiver using the LNB control signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F-type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 275.29 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-630 9×16 final multiswitch
KSh90,426.00Add to cartAlcad MU-630 – Serie 913: 9×16 final multiswitch.
Multiswitches for 8 polarities and terrestrial TV with 4, 8 or 16 outputs, for star-shaped installations. The tap outputs are amplified on the IF satellite and terrestrial TV bands. The tap outputs are amplified on the IF satellite band. Must be powered from each individual receiver to feed the switching and amplification of each tap output. To feed the LNBs, the FU-612 power supply unit is used.
Applications
Individual or SMATV installations, up to 16 TV outlets. Star- haped distribution from the multiswitch, with a single coaxial cable to each TV outlet. The multiswitch distributes a satellite polarity together with the terrestrial TV for each output. The polarity is selected from the individual receiver by means of the LNB and tone burst control signals, or the DiSEqC (Version 1.0 and later) signal.
Characteristics
Return path included from 5 to 65 MHz. Shielded zamak chassis with plastic supports. F type connectors. Power supply jack, 9.5mm x 2.1mm. Distances of more than 75 m between multiswitch and outlet.
Downloads
Technical specification
Technical specification
Manuals
– pdf 255.88 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Technical specifications
-
Alcad MU-640 9×16 cascadable multiswitch
KSh79,220.00Add to cartAlcad MU-640 – Serie 913: 9×16 cascadable multiswitch.
Multiswitches for 4 polarities and terrestrial TV with 8 or 16 outputs, for installations in cascade. The tap outputs are amplified on the IF satellite band. Power must be supplied from each individual receiver to feed the switching and amplification of each tap output.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 120 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 120 outlets and distributing the 4 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 5 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. The polarity is selected from the individual receiver using the LNB control signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 251.1 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Technical specifications
-
Alcad MU-641 Cascadable multiswitch, 9×16 actif
KSh89,392.00Add to cartAlcad MU-641 – Serie 913: Cascadable multiswitch, 9×16 actif.
Multiswitches for 8 and 16 polarities and terrestrial TV with 8 or 16 outputs, for installations in cascade. The inputs of the 8 polarities and the terrestrial TV are amplified. For 16 polarities, 2 stacked multiswitches of 8 polarities are installed and an external DiSEqC switch (CN-611) for each output. The tap outlets are amplified on the IF satellite band. Power must be supplied from the inputs or the through outputs to feed the built-in line amplifiers. Power must be supplied from each individual receiver to feed the switching and amplification of each tap output. To feed the active multiswitches, the FU-513 power unit is used; it is connected to the AU-620 amplifier of the cascade.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 128 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 128 outlets and distributing the 8 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 9 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. For 8 polarities, the polarity is selected from the individual receiver using the LNB control signals and tone burst or using the DiSEqC signals (version 1.0 or higher); for 16 polarities, polarity is selected using only the DiSEqC signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F-type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 251.1 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Technical specifications
-
Alcad PA-740 Broadband amplifier himalaya
KSh45,026.00Add to cartAlcad PA-740 – Serie 912: Broadband amplifier himalaya.
Broadband amplifier for 912-TM himalaya transmodulators. It has one input to amplify the signal coming from all the modules of the installation, and a mutliplexing input for the rest of the channels of the installation. The output level can be controlled by means of an attenuator.
Downloads
Technical specification
Technical specification
Manuals
PA-740 Manual pdf 2.11 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – PA-740 pdf 61.29 KB
Technical specifications
-
Alcad PF-220 Satellite dish 65 cm steel (x1)
KSh7,158.00Add to cartAlcad PF-220 – Serie 912: Satellite dish 65 cm steel (x1).
Offset type parabolic antenna with high gain and efficiency. The assembly of the antenna is simple, once installed it is very robust and assures great orientation stability. The packaging includes fittings which avoid damage to the dish during transportation.
Applications
Suitable for satellite TV installations, collective or individual. The antenna is available in three sizes: 100 x 95 cm for collective installations; 85 x 80 cm and 65 x 60 cm for individual installations.
Characteristics
Robust antenna with great resistance to sun and saltpetre. The dish is made from epoxy covered galvanised steel and the accessories are of galvanised iron.
Downloads
Technical specification
Technical specification
Manuals
– pdf 1.49 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad PF-223 – Serie 912: Satellite dish 65 cm steel with lnb (x1).
Offset type parabolic antenna with high gain and efficiency with universal single LNB included. The assembly of the antenna is simple, once installed it is very robust and assures great orientation stability. The packaging includes fittings which avoid damage to the dish during transportation.
Applications
Suitable for individual satellite TV installations. The antenna is available in two sizes: 85 cm x 80 cm and 65 cm x 60 cm.
Characteristics
Robust antenna with great resistance to sun and saltpetre. The dish is made from epoxy covered galvanised steel and the accessories are of galvanised iron. Supplied in an individual or multiple pack.
Downloads
Technical specification
Technical specification
Manuals
– pdf 1.49 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad PF-224 – Serie 912: Satellite dish 65 cm steel with lnb (x5).
Offset type parabolic antenna with high gain and efficiency with universal single LNB included. The assembly of the antenna is simple, once installed it is very robust and assures great orientation stability. The packaging includes fittings which avoid damage to the dish during transportation.
Applications
Suitable for individual satellite TV installations. The antenna is available in two sizes: 85 cm x 80 cm and 65 cm x 60 cm.
Characteristics
Robust antenna with great resistance to sun and saltpetre. The dish is made from epoxy covered galvanised steel and the accessories are of galvanised iron. Supplied in an individual or multiple pack.
Downloads
Technical specification
Technical specification
Manuals
– pdf 1.49 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad PF-230 Offset dish 60 cm, lnb universal
KSh30,466.00Add to cartAlcad PF-230 – Serie 912: Offset dish 60 cm, lnb universal.
Fibreglass parabolic antenna with universal LNB. The antenna is an offset type with high gain and efficiency. The assembly of the dish is simple, once installed it is very robust and assures great orientation stability. The high resistance of the fibreglass dish means that the antenna is practically ndestructible during transportation as well as in later use.
Applications
Suitable for individual satellite TV installations. The antenna measures 60cm x 60cm.
Characteristics
Highly robust antenna with great resistance to sun and saltpetre. The dish is made of polyester with an inserted metallic mesh. The accessoires for fixing he antenna are made of galvanised iron.
Downloads
Technical specification
Technical specification
Manuals
– pdf 1.56 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad PF-420 Satellite dish 80 cm steel (x1)
KSh10,536.00Add to cartAlcad PF-420 – Serie 912: Satellite dish 80 cm steel (x1).
Offset type parabolic antenna with high gain and efficiency. The assembly of the antenna is simple, once installed it is very robust and assures great orientation stability. The packaging includes fittings which avoid damage to the dish during transportation.
Applications
Suitable for satellite TV installations, collective or individual. The antenna is available in three sizes: 100 x 95 cm for collective installations; 85 x 80 cm and 65 x 60 cm for individual installations.
Characteristics
Robust antenna with great resistance to sun and saltpetre. The dish is made from epoxy covered galvanised steel and the accessories are of galvanised iron.
Downloads
Technical specification
Technical specification
Manuals
– pdf 169.98 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad PF-423 – Serie 912: Satellite dish 80 cm steel with lnb (x1).
Offset type parabolic antenna with high gain and efficiency with universal single LNB included. The assembly of the antenna is simple, once installed it is very robust and assures great orientation stability. The packaging includes fittings which avoid damage to the dish during transportation.
Applications
Suitable for individual satellite TV installations. The antenna is available in two sizes: 85 cm x 80 cm and 65 cm x 60 cm.
Characteristics
Robust antenna with great resistance to sun and saltpetre. The dish is made from epoxy covered galvanised steel and the accessories are of galvanised iron. Supplied in an individual or multiple pack.
Downloads
Technical specification
Technical specification
Manuals
– pdf 169.98 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad PF-424 – Serie 912: Satellite dish 80 cm steel with lnb (x5).
Offset type parabolic antenna with high gain and efficiency with universal single LNB included. The assembly of the antenna is simple, once installed it is very robust and assures great orientation stability. The packaging includes fittings which avoid damage to the dish during transportation.
Applications
Suitable for individual satellite TV installations. The antenna is available in two sizes: 85 cm x 80 cm and 65 cm x 60 cm.
Characteristics
Robust antenna with great resistance to sun and saltpetre. The dish is made from epoxy covered galvanised steel and the accessories are of galvanised iron. Supplied in an individual or multiple pack.
Downloads
Technical specification
Technical specification
Manuals
– pdf 169.98 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad PF-431 Fibre offset dish 85 cm
KSh33,050.00Add to cartAlcad PF-431 – Serie 912: Fibre offset dish 85 cm.
Fibreglass offset parabolic antenna with high gain and efficiency. The assembly of the antenna is simple, once installed it is very robust and assures great orientation stability. The packaging includes fittings which avoid damage to the dish during transportation.
Applications
Suitable for individual satellite TV or SMATV installations. The antenna measures 89cm x 78cm.
Characteristics
Highly robust antenna with great resistance to sun and saltpetre. The dish is made of polyester with an inserted metallic mesh. The accessories for fixing the antenna are made of galvanised iron.
Downloads
Technical specification
Technical specification
Manuals
– pdf 445.45 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad PF-620 Satellite dish 100 cm steel (x1)
KSh22,480.00Add to cartAlcad PF-620 – Serie 912: Satellite dish 100 cm steel (x1).
Offset type parabolic antenna with high gain and efficiency. The assembly of the antenna is simple, once installed it is very robust and assures great orientation stability. The packaging includes fittings which avoid damage to the dish during transportation.
Applications
Suitable for satellite TV installations, collective or individual. The antenna is available in three sizes: 100 x 95 cm for collective installations; 85 x 80 cm and 65 x 60 cm for individual installations.
Characteristics
Robust antenna with great resistance to sun and saltpetre. The dish is made from epoxy covered galvanised steel and the accessories are of galvanised iron.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad PR-200 – Serie 909: 14 db uhf preamplifier remote feed.
14dB UHF preampli?er, remote-fed at 24 Vdc with F type connectors.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad PR-201 – Serie 909: 14 db uhf preamplifier.
14 dB UHF preamplifier, with Faston connector to be powered at 24Vdc.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad PR-310 – Serie 909: Preamplifier 5-2400 mhz 10 db.
10dB 5-2400MHz preampli?er with dc path, remote-fed at 13/18Vdc with F type connectors.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read more
Alcad PT-320 – Serie 907: If user acces point, if splitter 3 out.
User access point for terrestrial and satellite TV. It has two inputs and three outputs. One of the inputs remains connected to the outputs while the other input is permanently connected to a 75 ohm load. Designed for the 5-2,400 MHz frequency range. Also available in 2-, 4-, 5-, 6- and 8-output models.
Applications
Designed for TV installations with two coaxial cables in which distribution to the houses is performed with a single coaxial cable. The signal which is distributed to the house is selected by changing the connections of the coaxial cables at the user access point.
Characteristics
Voltage blockage in the output connectors. No return path. Shielded zamak and metal plate chassis. F type connectors in machined zamak which form part of the chassis. Reduced dimensions.
Downloads
Technical specification
Technical specification
-
Read moreAlcad PT-420 – Serie 907: If user acces point, if splitter 4 out.
User access point for terrestrial and satellite TV. It has two inputs and four outputs. One of the inputs remains connected to the outputs while the other input is permanently connected to a 75 ohm load. Designed for the 5-2,400 MHz frequency range. Also available in 2-, 3-, 5-, 6- and 8-output models.
Applications
Designed for TV installations with two coaxial cables in which distribution to the houses is performed with a single coaxial cable. The signal which is distributed to the house is selected by changing the connections of the coaxial cables at the user access point.
Characteristics
Voltage blockage in the output connectors. No return path. Shielded zamak and metal plate chassis. F type connectors in machined zamak which form part of the chassis. Reduced dimensions.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad PT-520 – Serie 907: If user acces point, if splitter 5 out.
User access point for terrestrial and satellite TV. It has two inputs and five outputs. One of the inputs remains connected to the outputs while the other input is permanently connected to a 75 ohm load. Designed for the 5-2,400 MHz frequency range. Also available in 2-, 3-, 4-, 6- and 8-output models.
Applications
Designed for TV installations with two coaxial cables in which distribution to the houses is performed with a single coaxial cable. The signal which is distributed to the house is selected by changing the connections of the coaxial cables at the user access point.
Characteristics
Voltage blockage in the output connectors. No return path. Shielded zamak and metal plate chassis. F type connectors in machined zamak which form part of the chassis. Reduced dimensions.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad PT-620 – Serie 907: If user acces point, if splitter 6 out.
User access point for terrestrial and satellite TV. It has two inputs and six outputs. One of the inputs remains connected to the outputs while the other input is permanently connected to a 75 ohm load. Designed for the 5-2,400 MHz frequency range. Also available in 2-, 3-, 4-, 5- and 8-output models.
Applications
Designed for TV installations with two coaxial cables in which distribution to the houses is performed with a single coaxial cable. The signal which is distributed to the house is selected by changing the connections of the coaxial cables at the user access point.
Characteristics
Voltage blockage in the output connectors. No return path. Shielded zamak and metal plate chassis. F type connectors in machined zamak which form part of the chassis. Reduced dimensions.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad PZ-010 Fast ”f” connector plug bridge
KSh1,028.00Add to cartAlcad PZ-010 – Serie 905: Fast ”f” connector plug bridge.
Multiplexing and diplexing bridge with high-speed male F-type connector, to combine the signal of the modules or for the distribution of the signal from one antenna to several modules. For equipment with prototype connector.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad PZ-020 – Serie 905: ”f” male iec ?9,52mm plug bridge.
Multiplexing and diplexing bridge with F-type male connector and IEC male ?9.52 mm connector for combining signals from all modules or for distributing the signal from one antenna to several modules. Can be used to add a module to or to replace a module with IEC connector using modules with F-type connector.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
