Category: Televes
Televes
Televes is a company belonging to Televes Corporation. Televes Corporation groups more than 20 companies which all work to achieve the common objective of designing and producing the best equipments used to equip homes, buildings and cities with optimum telecommunication infrastructures.
Showing 1–60 of 71 results
-
Read moreTELEVES 12V Domestic 220mA PSU 2 Output
F Low Power Consumption *Special
Order! NCNR – Check Lead Time*
Domestic 12 V-power supply (220 mA) that powers equipment through the
input coaxial cable while allowing the transmission of the TV signal.
Included in the installation to power either mast amplifiers or a BOSS
system. Furthermore, it is equipped with two outputs. Highlights:
High-performance switched-mode power supply: saves up to 40% power
consumption Low-impact visual design and limited size “F” connectors Fully
automated manufacturing, subject to the most stringent quality controls Can
be wall-mounted using screws Through losses may vary depending on whether 1
or 2 outputs are used -
Read moreTELEVES
13×13 CASCADE Launch Amp30db SAT 30dB Terr – 2 Year Warranty
*Special Order! NCNR – Check Lead Time*This unit can be used as a cascade element since it has 13 outputs to
connect to other switches and increase the number of users.
This range of products has been designed with the ECO system: as the number
of users decreases, the power consumption of the system will decrease as
well.
Gain in the FI band can be selected individually for each group of 8 users
to provide a
balanced output. -
Read moreTELEVES 13x13x12 CASCADE Multiswitch 13 In 12 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* This unit can be used as a cascade element
since it has 13 outputs to connect to other switches and increase the number
of users. This range of products has been designed with the ECO system: as
the number of users decreases, the power consumption of the system will
decrease as well. Gain in the FI band can be selected individually for each
group of 8 users to provide a balanced output. -
Read moreTELEVES
13x13x16 CASCADE Multiswitch13 In 16 Out c/w Output Earth Bar Only
2 Year Warranty
*Special Order! NCNR – Check Lead Time*This unit can be used as a cascade element since it has 13 outputs to
connect to other switches and increase the number of users.
This range of products has been designed with the ECO system: as the number
of users decreases, the power consumption of the system will decrease as
well.
Gain in the I.F. band can be selected individually for each group of 8
users to provide a
balanced output. -
Read moreTELEVES 13x13x8 CASCADE Multiswitch 13 In 8 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* This unit can be used as a cascade element
since it has 13 outputs to connect to other switches and increase the number
of users. This range of products has been designed with the ECO system: as
the number of users decreases, the power consumption of the system will
decrease as well. Gain in the FI band can be selected individually for each
group of 8 users to provide a balanced output. -
Read moreTELEVES 13×24 CASCADE-TERMINATED 13 In 24 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* This unit can be used as a cascade element
since it has 13 outputs to connect to other switches and increase the number
of users. This range of products has been designed with the ECO system: as
the number of users decreases, the power consumption of the system will
decrease as well. Gain in the FI band can be selected individually for each
group of 8 users to provide a balanced output. -
Read moreTELEVES 13×32 CASCADE-TERMINATED 13 In 32 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* This unit can be used as a cascade element
since it has 13 outputs to connect to other switches and increase the number
of users. This range of products has been designed with the ECO system: as
the number of users decreases, the power consumption of the system will
decrease as well. Gain in the FI band can be selected individually for each
group of 8 users to provide a balanced output. -
Read moreTELEVES
300mm Connecting Leads Kit(x5 System Colour Coded Link Leads)
*Special Order! NCNR – Check Lead Time*Kit composed of 5 coloured cables (red, yellow, black, white and green)
with 26 cm in length each.Features:
Outer sheath of PVC
“Quick F” connectors
Cable conductors made of copper -
Read moreTELEVES Euroswitch 17×17 Launch Amp 27/31dB Vo 114/118dBµV – 2 Year Warranty
*Special Order! NCNR – Check Lead Time*
Compact amplifier equipped with 17 inputs (one terrestrial and the
four polarities of four satellites) that allows increasing the number of
users in the installation while optimizing the signal received by each of
them. Amplification around 27 dB for terrestrial, and 31 dB for satellite.
RED compliant Main Features: High shielding (A class) thanks to its
manufacture in Zamak Low power consumption Wide 12-18V power supply range,
making it compatible with most existing systems Input and output colour
identification -
Read moreTELEVES Euroswitch 17x17x16 CASCADE 17 In 16 Out – 2 Year Warranty *Special
Order! NCNR – Check Lead Time* Compact
multiswitch equipped with 17 inputs (one terrestrial and 16 for four
satellites, each with its four polarities) and 16 user outputs. Thanks to its great compactness and its
optimized electronic design, it presents very low through and tap losses.
This allows to reduce the number of amplifiers needed in the cascade and to
obtain a better balanced signal in the users, even in large collective
installations. Can be used as a
terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour
identification -
Read moreTELEVES Euroswitch 17x17x24 CASCADE 17 In 24 Out – 2 Year Warranty *Special
Order! NCNR – Check Lead Time* Compact
multiswitch equipped with 17 inputs (one terrestrial and 16 for four
satellites, each with its four polarities) and 24 user outputs. Thanks to its great compactness and its
optimized electronic design, it presents very low through and tap losses.
This allows to reduce the number of amplifiers needed in the cascade and to
obtain a better balanced signal in the users, even in large collective
installations. Can be used as a
terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour
identification -
Read moreTELEVES Euroswitch 17x17x32 CASCADE 17 In 32 Out – 2 Year Warranty *Special
Order! NCNR – Check Lead Time* Compact
multiswitch equipped with 17 inputs (one terrestrial and 16 for four
satellites, each with its four polarities) and 32 user outputs. Thanks to its great compactness and its
optimized electronic design, it presents very low through and tap losses.
This allows to reduce the number of amplifiers needed in the cascade and to
obtain a better balanced signal in the users, even in large collective
installations. Can be used as a
terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour
identification -
Read moreTELEVES Euroswitch 17x17x8 CASCADE 17 In 8 Out – 2 Year Warranty *Special
Order! NCNR – Check Lead Time* Compact
multiswitch equipped with 17 inputs (one terrestrial and 16 for four
satellites, each with its four polarities) and 8 user outputs. Thanks to its great compactness and its
optimized electronic design, it presents very low through and tap losses.
This allows to reduce the number of amplifiers needed in the cascade and to
obtain a better balanced signal in the users, even in large collective
installations. Can be used as a
terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour
identification -
Read moreTELEVES Euroswitch 5x5x12 CASCADE 5 In 12 Out – 2 Year Warranty (May require
a PSU: 12V1.5A PSU 732210) *Special Order! NCNR – Check Lead Time* Compact multiswitch equipped with 5 inputs
(one terrestrial, and the four polarities of one satellite) and 12 user
outputs. Thanks to its great
compactness and its optimized electronic design, it presents very low through
and tap losses. This allows to reduce the number of amplifiers needed in the
cascade and to obtain a better balanced signal in the users, even in large
collective installations. Can be used
as a terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour identification -
Read moreTELEVES
Euroswitch 5x5x16 CASCADE5 In 16 Out – 2 Year Warranty
(May require a PSU: 12V1.5A PSU 732210)
*Special Order! NCNR – Check Lead Time*Compact multiswitch equipped with 5 inputs (one terrestrial, and the four
polarities of one satellite) and 16 user outputs.Thanks to its great compactness and its optimized electronic design, it
presents very low through and tap losses. This allows to reduce the number of
amplifiers needed in the cascade and to obtain a better balanced signal in
the users, even in large collective installations.Can be used as a terminal (star topology) or as a cascade by using a simple
switch. In addition, it incorporates a second switch that actives the TForce
technology, which automatically adjusts the terrestrial signal and keep it
constant despite variations in the reception. RED compliantMain Features:
High shielding (A class) thanks to its manufacture in Zamak
Versatile: selector switch to shift between cascade and terminal
modes
Low consumption under normal conditions. In addition, ECO mode reduces
consumption as the number of connected users decreases
Wide 12-18V power supply range, making it compatible with most existing
systems
Current circulation between all inputs and cascades
Input and output colour identification -
Read moreTELEVES
Euroswitch 5x5x24 CASCADE5 In 24 Out – 2 Year Warranty
(May require a PSU: 12V1.5A PSU 732210)
*Special Order! NCNR – Check Lead Time*Compact multiswitch equipped with 5 inputs (one terrestrial, and the four
polarities of one satellite) and 24 user outputs.Thanks to its great compactness and its optimized electronic design, it
presents very low through and tap losses. This allows to reduce the number of
amplifiers needed in the cascade and to obtain a better balanced signal in
the users, even in large collective installations.Can be used as a terminal (star topology) or as a cascade by using a simple
switch. In addition, it incorporates a second switch that actives the TForce
technology, which automatically adjusts the terrestrial signal and keep it
constant despite variations in the reception. RED compliant.Main Features:
High shielding (A class) thanks to its manufacture in Zamak
Versatile: selector switch to shift between cascade and terminal
modes
Low consumption under normal conditions. In addition, ECO mode reduces
consumption as the number of connected users decreases
Wide 12-18V power supply range, making it compatible with most existing
systems
Current circulation between all inputs and cascades
Input and output colour identification -
Read moreTELEVES
Euroswitch 5x5x32 CASCADE5 In 32 Out – 2 Year Warranty
(May require a PSU: 12V1.5A PSU 732210)
*Special Order! NCNR – Check Lead Time*Compact multiswitch equipped with 5 inputs (one terrestrial, and the four
polarities of one satellite) and 32 user outputs.Thanks to its great compactness and its optimized electronic design, it
presents very low through and tap losses. This allows to reduce the number of
amplifiers needed in the cascade and to obtain a better balanced signal in
the users, even in large collective installations.Can be used as a terminal (star topology) or as a cascade by using a simple
switch. In addition, it incorporates a second switch that actives the TForce
technology, which automatically adjusts the terrestrial signal and keep it
constant despite variations in the reception. RED compliantMain Features:
High shielding (A class) thanks to its manufacture in Zamak
Versatile: selector switch to shift between cascade and terminal
modes
Low consumption under normal conditions. In addition, ECO mode reduces
consumption as the number of connected users decreases
Wide 12-18V power supply range, making it compatible with most existing
systems
Current circulation between all inputs and cascades
Input and output colour identification -
Read moreTELEVES
Euroswitch 5x5x4 CASCADE5 In 4 Out – 2 Year Warranty
(May require a PSU: 12V1.5A PSU 732210)
*Special Order! NCNR – Check Lead Time*Compact multiswitch equipped with 5 inputs (one terrestrial, and the four
polarities of one satellite) and 4 user outputs.Thanks to its great compactness and its optimized electronic design, it
presents very low through and tap losses. This allows to reduce the number of
amplifiers needed in the cascade and to obtain a better balanced signal in
the users, even in large collective installations.Can be used as a terminal (star topology) or as a cascade by using a simple
switch. In addition, it incorporates a second switch that actives the TForce
technology, which automatically adjusts the terrestrial signal and keep it
constant despite variations in the reception. RED compliant.Main Features:
High shielding (A class) thanks to its manufacture in Zamak
Versatile: selector switch to shift between cascade and terminal
modes
Low consumption under normal conditions. In addition, ECO mode reduces
consumption as the number of connected users decreases
Wide 12-18V power supply range, making it compatible with most existing
systems
Current circulation between all inputs and cascades
Input and output colour identification -
Read moreTELEVES
Euroswitch 5x5x6 CASCADE5 In 6 Out – 2 Year Warranty
(May require a PSU: 12V1.5A PSU 732210)Compact multiswitch equipped with 5 inputs (one terrestrial, and the four
polarities of one satellite) and 6 user outputs.Thanks to its great compactness and its optimized electronic design, it
presents very low through and tap losses. This allows to reduce the number of
amplifiers needed in the cascade and to obtain a better balanced signal in
the users, even in large collective installations.Can be used as a terminal (star topology) or as a cascade by using a simple
switch. In addition, it incorporates a second switch that actives the TForce
technology, which automatically adjusts the terrestrial signal and keep it
constant despite variations in the reception. RED compliant.Main Features:
High shielding (A class) thanks to its manufacture in Zamak
Versatile: selector switch to shift between cascade and terminal
modes
Low consumption under normal conditions. In addition, ECO mode reduces
consumption as the number of connected users decreases
Wide 12-18V power supply range, making it compatible with most existing
systems
Current circulation between all inputs and cascades
Input and output colour identification -
Read moreTELEVES
Euroswitch 5x5x8 CASCADE5 In 8 Out – 2 Year Warranty
(May require a PSU: 12V1.5A PSU 732210)
*Special Order! NCNR – Check Lead Time*Compact multiswitch equipped with 5 inputs (one terrestrial, and the four
polarities of one satellite) and 8 user outputs.Thanks to its great compactness and its optimized electronic design, it
presents very low through and tap losses. This allows to reduce the number of
amplifiers needed in the cascade and to obtain a better balanced signal in
the users, even in large collective installations.Can be used as a terminal (star topology) or as a cascade by using a simple
switch. In addition, it incorporates a second switch that actives the TForce
technology, which automatically adjusts the terrestrial signal and keep it
constant despite variations in the reception. RED compliantMain Features:
High shielding (A class) thanks to its manufacture in Zamak
Versatile: selector switch to shift between cascade and terminal
modes
Low consumption under normal conditions. In addition, ECO mode reduces
consumption as the number of connected users decreases
Wide 12-18V power supply range, making it compatible with most existing
systems
Current circulation between all inputs and cascades
Input and output colour identification -
Read moreTELEVES Euroswitch 9×9 CASCADE Launch
Amp 27/31dB Vo 114/117dBµV – 2 Year
Warranty *Special Order! NCNR – Check Lead Time* Compact amplifier equipped with 9 inputs
(one terrestrial and the four polarities of two satellites) that allows
increasing the number of users in the installation while optimizing the
signal received by each of them. Amplification around 27 dB for terrestrial,
and 31 dB for satellite. RED compliant
Main Features: High shielding
(A class) thanks to its manufacture in Zamak Low power consumption Wide
12-18V power supply range, making it compatible with most existing systems
Input and output colour identification -
Read moreTELEVES Euroswitch 9x9x12 CASCADE 9 In 12 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* Compact multiswitch equipped with 9 inputs
(one terrestrial and 8 for two satellites, each with its four polarities) and
12 user outputs. Thanks to its great
compactness and its optimized electronic design, it presents very low through
and tap losses. This allows to reduce the number of amplifiers needed in the
cascade and to obtain a better balanced signal in the users, even in large
collective installations. Can be used
as a terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour identification -
Read moreTELEVES Euroswitch 9x9x16 CASCADE 9 In 16 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* Compact multiswitch equipped with 9 inputs
(one terrestrial and 8 for two satellites, each with its four polarities) and
16 user outputs. Thanks to its great
compactness and its optimized electronic design, it presents very low through
and tap losses. This allows to reduce the number of amplifiers needed in the
cascade and to obtain a better balanced signal in the users, even in large
collective installations. Can be used
as a terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant. Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour identification -
Read moreTELEVES Euroswitch 9x9x24 CASCADE 9 In 24 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* Compact multiswitch equipped with 9 inputs
(one terrestrial and 8 for two satellites, each with its four polarities) and
24 user outputs. Thanks to its great
compactness and its optimized electronic design, it presents very low through
and tap losses. This allows to reduce the number of amplifiers needed in the
cascade and to obtain a better balanced signal in the users, even in large
collective installations. Can be used
as a terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant. Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour identification -
Read moreTELEVES Euroswitch 9x9x32 CASCADE 9 In 32 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* Compact multiswitch equipped with 9 inputs
(one terrestrial and 8 for two satellites, each with its four polarities) and
32 user outputs. Thanks to its great
compactness and its optimized electronic design, it presents very low through
and tap losses. This allows to reduce the number of amplifiers needed in the
cascade and to obtain a better balanced signal in the users, even in large
collective installations. Can be used
as a terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour identification -
Read moreTELEVES Euroswitch 9x9x8 CASCADE 9 In 8 Out c/w Output Earth Bar Only 2 Year
Warranty *Special Order! NCNR – Check Lead Time* Compact multiswitch equipped with 9 inputs
(one terrestrial and 8 for two satellites, each with its four polarities) and
8 user outputs. Thanks to its great
compactness and its optimized electronic design, it presents very low through
and tap losses. This allows to reduce the number of amplifiers needed in the
cascade and to obtain a better balanced signal in the users, even in large
collective installations. Can be used
as a terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant. Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour
identification -
Read moreTELEVES
Lead F Male to 2mm Female DC Jack40cm Power Lead 2A
DC power cord
F connector and female jackPower cord with a female jack on one end, and a 3/8″ male F connector
on the other.Supplied in individual packing.
Main features
Length: 40 cm
2 mm female jack
3/8″ male F connector
Current > 2 A -
Read moreTELEVES
Nevoswitch 12dB Tap5 In – 5 Trunk + 5 Tap Out
2 Year Warranty
*Special Order! NCNR – Check Lead Time*CONFIGURABLE ELEMENTS FOR BETTER SIGNAL ADJUSTMENT
Highlights:
Chassis made of zamak: radiation inmune.
Suitable for star/cascade system configurations.
Independent Output Level adjustment (except QUAD compatible units).
Low consumption ECO mode. Thanks to the ECO system, the consumption
decreases as the number of users is reduced.
Main Features:
Small size and compact design.
Cascadable and terminal configuration in a single reference.
Independent line-amplifier level adjustment.
Multiple powering options (Jack, VLow, Terrestrial Input/Output and user
outputs)
Independent output level adjustment. -
Read moreTELEVES Nevoswitch 15dB Tap 5 In – 5 Trunk + 5 Tap Out 2 Year Warranty
*Special Order! NCNR – Check Lead Time*
CONFIGURABLE ELEMENTS FOR BETTER SIGNAL ADJUSTMENT Highlights: Chassis
made of zamak: radiation inmune. Suitable for star/cascade system
configurations. Independent Output Level adjustment (except QUAD compatible
units). Low consumption ECO mode. Thanks to the ECO system, the consumption
decreases as the number of users is reduced. Main Features: Small size and
compact design. Cascadable and terminal configuration in a single reference.
Independent line-amplifier level adjustment. Multiple powering options (Jack,
VLow, Terrestrial Input/Output and user outputs) Independent output level
adjustment. -
Read moreTELEVES Nevoswitch 17×17 CASCADE Amp 18db SAT 14dB Terr – 2 Year Warranty
*Special Order! NCNR – Check Lead Time*
Highlights: 10 dB Low Gain (LG)
/ High Gain (HG) switch for the attenuation of the satellite input signal for
each 8-user group Remote power feeding using VL Current circulation between
all inputs and cascades Compatible with return-channel applications European
design, quality, and manufacturing
Main features: Very compact
Made of zamak Input and output colour identification Available ECO mode
Selector switch to shift between cascade and terminal modes 12 V power supply
Low power consumption -
Read moreTELEVES Nevoswitch 17x17x12 CASCADE 17 In 12 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* Highlights:
10 dB Low Gain (LG) / High Gain (HG) switch for the attenuation of the
satellite input signal for each 8-user group Remote power feeding using VL
Current circulation between all inputs and cascades Compatible with
return-channel applications European design, quality, and manufacturing Main features: Very compact Made of zamak Input and output
colour identification Available ECO mode Selector switch to shift between cascade
and terminal modes 12 V power supply Low power consumption -
Read moreTELEVES Nevoswitch 17x17x16 CASCADE 17 In 16 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* Highlights:
10 dB Low Gain (LG) / High Gain (HG) switch for the attenuation of the
satellite input signal for each 8-user group Remote power feeding using VL
Current circulation between all inputs and cascades Compatible with
return-channel applications European design, quality, and manufacturing Main features: Very compact Made of zamak Input and output
colour identification Available ECO mode Selector switch to shift between cascade
and terminal modes 12 V power supply Low power consumption -
Read moreTELEVES Nevoswitch 17x17x8 CASCADE 17 In 8 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* Highlights:
10 dB Low Gain (LG) / High Gain (HG) switch for the attenuation of the
satellite input signal for each 8-user group Remote power feeding using VL
Current circulation between all inputs and cascades Compatible with
return-channel applications European design, quality, and manufacturing Main features: Very compact Made of zamak Input and output
colour identification Available ECO mode Selector switch to shift between cascade
and terminal modes 12 V power supply Low power consumption -
Read moreTELEVES
Nevoswitch 17×24 CASCADE-TERMINATE17 In 24 Out c/w Output Earth Bar Only
2 Year Warranty
*Special Order! NCNR – Check Lead Time*Highlights:
10 dB Low Gain (LG) / High Gain (HG) switch for the attenuation of the
satellite input signal for each 8-user group
Remote power feeding using VL
Current circulation between all inputs and cascades
Compatible with return-channel applications
European design, quality, and manufacturingMain features:
Very compact
Made of zamak
Input and output colour identification
Available ECO mode
Selector switch to shift between cascade and terminal modes
12 V power supply
Low power consumption -
Read moreTELEVES Nevoswitch 17×32
CASCADE-TERMINATE 17 In 32 Out c/w
Output Earth Bar Only 2 Year Warranty *Special Order! NCNR – Check Lead
Time* Highlights: 10 dB Low Gain (LG) / High Gain (HG) switch
for the attenuation of the satellite input signal for each 8-user group
Remote power feeding using VL Current circulation between all inputs and
cascades Compatible with return-channel applications European design,
quality, and manufacturing Main
features: Very compact Made of zamak
Input and output colour identification Available ECO mode Selector switch to
shift between cascade and terminal modes 12 V power supply Low power
consumption -
Read moreTELEVES Nevoswitch 20dB Tap 5 In – 5 Trunk + 5 Tap Out 2 Year Warranty
*Special Order! NCNR – Check Lead Time*
CONFIGURABLE ELEMENTS FOR BETTER SIGNAL ADJUSTMENT Highlights: Chassis made of zamak:
radiation inmune. Suitable for star/cascade system configurations.
Independent Output Level adjustment (except QUAD compatible units). Low
consumption ECO mode. Thanks to the ECO system, the consumption decreases as
the number of users is reduced. Main Features: Small size and compact design.
Cascadable and terminal configuration in a single reference. Independent
line-amplifier level adjustment. Multiple powering options (Jack, VLow,
Terrestrial Input/Output and user outputs) Independent output level
adjustment. -
Read moreTELEVES
Nevoswitch 5×10 Splitter5 In – 5+5 Out – 2 Year Warranty
2 Year Warranty
*Special Order! NCNR – Check Lead Time*CONFIGURABLE ELEMENTS FOR BETTER SIGNAL ADJUSTMENT
Highlights:
Chassis made of zamak: radiation inmune.
Suitable for star/cascade system configurations.
Independent Output Level adjustment (except QUAD compatible units).
Low consumption ECO mode. Thanks to the ECO system, the consumption
decreases as the number of users is reduced.
Main Features:
Small size and compact design.
Cascadable and terminal configuration in a single reference.
Independent line-amplifier level adjustment.
Multiple powering options (Jack, VLow, Terrestrial Input/Output and user
outputs)
Independent output level adjustment. -
Read moreTELEVES
Nevoswitch 5×5 Amplifier High-Gain30dB SAT 27dB Terr – 2 Year Warranty
Amplifier equipped with 5 inputs (one terrestrial and the four Quattro
polarities of one satellite) compatible with EuroSwitch and NevoSwitch ranges,
that allows increasing the number of users in the installation while
optimizing the signal received by each of them. Amplification around 27 dB
for terrestrial, and 31 dB for satellite.Highlights:
High output level
Switch for the selection of whether or not to power the terrestrial
pre-amplifiers (VDC or OFF)
Gain (20 dB) and slope (12 dB) individual adjustment
Power feeding through the VL input/outputMain Features:
Very compact
Made of zamak
Input and output colour identification
12/18 V power supply
Low power consumption -
Read moreTELEVES
Nevoswitch 5×5 Amplifier Low-Gain15dB SAT 12dB Terr – 2 Year Warranty
*Special Order! NCNR – Check Lead Time*Amplifier equipped with 5 inputs (one terrestrial and the four Quattro
polarities of one satellite) compatible with EuroSwitch and NevoSwitch
ranges, that allows increasing the number of users in the installation while
optimizing the signal received by each of them. Amplification around 10 dB
for terrestrial, and 11 dB for satellite.Highlights:
High output level
Switch for the selection of whether or not to power the terrestrial
pre-amplifiers (VDC or OFF)
Gain (20 dB) and slope (12 dB) individual adjustment
Power feeding through the VL input/outputMain Features:
Very compact
Made of zamak
Input and output colour identification
12 V power supply
Low power consumption -
Read moreTELEVES
Nevoswitch 5x5x12 CASCADE5 In 12 Out c/w Output Earth Bar Only
2 Year Warranty
(May require a PSU: 12V1.5A PSU 732210)
*Special Order! NCNR – Check Lead Time*New range of input/multiple output switches from 4 to 32. It can be used as
a cascade element since it has 5 outputs to connect to other switches and
increase the number of users.
It has the following powering options:Through the Power DC Jack (12 Vdc)
Through the V-Low input (12 Vdc).
Through the TERR input or output.
Applying 12 /18V at any user output.12V DC passes through the Terr and V-LOW input/output to power pre-amplif
ers, BOSS antennas, LNB or other elements (cascade).
The switch can generate the required voltage or voltage + tone (QUAD
references) so it’s compatible with any QUAD LNB.
The user can select the direction of the current/voltage through the TERR
input/output using the Switch No. 1.
This range of products has been designed with the ECO system: as the number
of users decreases, the power consumption of the system will decrease as
well.
When no users are connected and there’s no local mains, the consumption
will go down to 0A. In this case scenario, to see the DTT signal at least one
user must be connected to the system to power it.
Any signal must balanced to 75 ohms (Switch No. 2) in the last element of
the chain for the proper operation of the system.
This range allows control the output signal level of every user
individually. (Not available for the QUAD range)
This range of products has been designed as a complement to the former MSW
range, so any facility can be easily extended to more users, optimizing every
output signal.
The voltage/current can be activated/deactivated in the MSW amplif ers to
power pre-amplifiers, BOSS antennas, etc.. -
Read moreTELEVES
Nevoswitch 5x5x12 dSCRCascade 5 In 12 Out dSCR or Legacy c/w DC
(Earth Bars Not Included) 2 Year Warranty
*Special Order! NCNR – Check Lead Time*(May require PSU: 732802)
-
Read moreTELEVES
Nevoswitch 5x5x16 CASCADE5 In 16 Out c/w Output Earth Bar Only
2 Year Warranty
(May require a PSU: 12V1.5A PSU 732210)
*Special Order! NCNR – Check Lead Time*New range of input/multiple output switches from 4 to 32. It can be used as
a cascade element
since it has 5 outputs to connect to other switches and increase the number
of users.
It has the following powering options:Through the Power DC Jack (12 Vdc)
Through the V-Low input (12 Vdc).
Through the TERR input or output.
Applying 12 /18V at any user output.12V DC passes through the Terr and V-LOW input/output to power pre-amplif
ers, BOSS antennas, LNB or other elements (cascade).
The switch can generate the required voltage or voltage + tone (QUAD
references) so it’s compatible with any QUAD LNB.
The user can select the direction of the current/voltage through the TERR
input/output using the Switch No. 1.
This range of products has been designed with the ECO system: as the number
of users decreases, the power consumption of the system will decrease as
well.
When no users are connected and there’s no local mains, the consumption
will go down to 0A. In this case scenario, to see the DTT signal at least one
user must be connected to the system to power it.
Any signal must balanced to 75 ohms (Switch No. 2) in the last element of
the chain for the proper operation of the system.
This range allows control the output signal level of every user
individually. (Not available for the QUAD range)
This range of products has been designed as a complement to the former MSW
range, so any facility can be easily extended to more users, optimizing every
output signal.
The voltage/current can be activated/deactivated in the MSW amplif ers to
power pre-amplifiers, BOSS antennas, etc.. -
Read moreTELEVES
Nevoswitch 5x5x16 dSCRCascade 5 In 16 Out dSCR or Legacy c/w DC
(Earth Bars Not Included) 2 Year Warranty
*Special Order! NCNR – Check Lead Time*(May require PSU: 732802)
-
Read moreTELEVES
Nevoswitch 5x5x2 dSCRCascade 5 In 2 Out dSCR or Legacy c/w DC
(Earth Bars Not Included) 2 Year Warranty
*Special Order! NCNR – Check Lead Time*(May require PSU: 732210)
This 5 wire cascadable multiswitch supports SCR I (EN50494) and SCR II (EN
50607) standards and legacy mode, making the multiswitch compatible with any
existing or new set top box.With 4 satellite inputs (Quattro) and terrestrial input, this multiswitch offers
a 2 user outputs, with up to 16 user bands each.DCFLEX functionality
This exclusive functionality gives the product complete control and
flexibility to power the multiswitch from anywhere in the system. The
installer will have complete freedom to choose how to power the multiswitch
and will be able to choose the best to suit a particular scenario.This versatility is achieved via a switch (DC LINK) that can be used to
isolate or not, from a DC point of view, the multiswitch from the
cascade.Multiple powering options: Directly from a PSU, receiver outputs or line
power through the satellite inputs or outputs. Moreover, you could choose to
line power only the terrestrial side (TForce) of the multiswitch through the
terrestrial inputs or outputs.
It can be easily added to an existing system: You just need to connect a
power supply to the multiswitch and isolate it from the power on the cascade
(flick the DC link switch). The power of the existing system will pass
through the multiswitch unaltered and the dCSS NevoSwitch will only draw
power from its own power supply. This will avoid any possible problems
created by adding a new dCSS NevoSwitch to an existing system.
Increased safety for the set top boxes connected to the multiswitch, as
these are completely isolated from the power in the cascade, avoiding
potential issues with the power in the system affecting the end user
equipment.
Wide powering range: With voltages from 10V to 20V making it compatible
with most of the systems out there.ECO mode: The multiswitch isolated from the cascade can reduce its power
consumption to zero when the set top boxes are turned off and terrestrial is
passive. In case TForce is activated, the consumption is only 50mA. This is
possible because the multiswitch will also dynamically adapt the way that
it’s powered in order to keep its consumption to the minimum. So it will
automatically turn off any part of the circuit that is not been used in order
to lower its consumption.
DCFLEXHOW DOES THE DCFlex FUNCTIONALITY WORK? It can be controlled through the
following switches:SAT DC LINK switch (ON/OFF): It isolates or connects the power of the
multiswitch to the power available from the cascade (satellite legs).
OFF (isolated from the cascade): The MSW is powered locally (power supply)
or from the user output without adding or drawing power from the
cascade.
ON (connected to the cascade): The MSW can add or draw (in the case that
needs powering) current from the cascade.
TERR. DC switch (ON/OFF): It isolates or connects the power available from
the cascade (only terrestrial leg). It can be useful to line power a masthead
amplifier or a BOSS antenna, but it can also be use to line power the
terrestrial side of other MSWs in the cascade.
RECEIVER POWER switch (ON/OFF): It controls the DC pass from the user
outputs towards the multiswitch. You can power the device from the dCSS set
top box (if there is enough power available) or a power inserter.
TFORCEThe dCSS NevoSwitch also incorporates the innovative TForce technology,
based on MMIC components and developed exclusively by Televes. TForce offers
an intelligent terrestrial level adjustment.You can activate it or not by means of a switch making the multiswitch
active or passive on terrestrial.
In active mode, the MSW automatically adjust the terrestrial output level
to the optimum level.
In addition, this optimum level is kept balanced in every user output
through the dCSS cascade.
More features:Compatible with existing Televes NevoSwitch and also with the non-Televes
IRS systems.
Chassis made of Zamak: Improved screening attenuation.
Versatile: Cascadable and standalone configuration in the same reference
(with the flick of a switch).
Small size and compact design (140x120x30mm).
European quality and design, 100% manufactured and verified in our
robotized lines.SAT in
Frequency range MHz 950…2150
Input level dBµV 70 … 100
Through losses dB 2
Cross-polarity Isolation > 30
DTT in
Frequency range MHz 47… 862
Input level dBµV 65-110
(active: 70-95)
Terr. trunk power V / mA 10 … 20 / 500
Through losses dB < 2.5
dCSS OUT
dCSS user outputs No. 2
Output modes SCR I/II, Legacy
dCSS channel bandwidth MHz 46
dCSS user bands 2 x 16
dCSS standard EN50494
EN50607
Sky UK
Output level dBµV 84 ± 2
DTT OUT
Frequency range MHz 47… 862
Attenuation
(passive – TForce deactivated) dB -16
Automatic gain range
(TForce activated) dB 15… -10
Power consumption mA 50
Output level
(Amp. active / 2 channels) dBµV 87±3
(input 70-95uV)
POWER
Power supply voltage V oct-20
Maximum power consumption (@12V)
(dCSS + Terr. amp. + Auto Load) mA 340 + 50 + 10
DTT input supply current mA 500
User out max. current
(Receiver power ON) A 1
IF Trunk 4 lines max. current A 3
General
Operating temperature range ºC -5…45
ºF 23…113
Protection level IP 20
Dimensions (xyz) mm 140 x 120 x 30More info
-
Read moreTELEVES
Nevoswitch 5x5x24 CASCADE5 In 24 Out c/w Output Earth Bar Only
2 Year Warranty
(May require a PSU: 12V1.5A PSU 732210)
*Special Order! NCNR – Check Lead Time*New range of input/multiple output switches from 4 to 32. It can be used as
a cascade element
since it has 5 outputs to connect to other switches and increase the number
of users.
It has the following powering options:Through the Power DC Jack (12 Vdc)
Through the V-Low input (12 Vdc).
Through the TERR input or output.
Applying 12 /18V at any user output.12V DC passes through the Terr and V-LOW input/output to power pre-amplif
ers, BOSS antennas, LNB or other elements (cascade).
The switch can generate the required voltage or voltage + tone (QUAD
references) so it’s compatible with any QUAD LNB.
The user can select the direction of the current/voltage through the TERR
input/output using the Switch No. 1.
This range of products has been designed with the ECO system: as the number
of users decreases, the power consumption of the system will decrease as
well.
When no users are connected and there’s no local mains, the consumption
will go down to 0A. In this case scenario, to see the DTT signal at least one
user must be connected to the system to power it.
Any signal must balanced to 75 ohms (Switch No. 2) in the last element of
the chain for the proper operation of the system.
This range allows control the output signal level of every user
individually. (Not available for the QUAD range)
This range of products has been designed as a complement to the former MSW
range, so any facility can be easily extended to more users, optimizing every
output signal.
The voltage/current can be activated/deactivated in the MSW amplif ers to
power pre-amplifiers, BOSS antennas, etc.. -
Read moreTELEVES
Nevoswitch 5x5x32 CASCADE5 In 32 Out c/w Output Earth Bar Only
2 Year Warranty
(May require a PSU: 12V1.5A PSU 732210)
*Special Order! NCNR – Check Lead Time*New range of input/multiple output switches from 4 to 32. It can be used as
a cascade element
since it has 5 outputs to connect to other switches and increase the number
of users.
It has the following powering options:Through the Power DC Jack (12 Vdc)
Through the V-Low input (12 Vdc).
Through the TERR input or output.
Applying 12 /18V at any user output.12V DC passes through the Terr and V-LOW input/output to power pre-amplif
ers, BOSS antennas, LNB or other elements (cascade).
The switch can generate the required voltage or voltage + tone (QUAD
references) so it’s compatible with any QUAD LNB.
The user can select the direction of the current/voltage through the TERR
input/output using the Switch No. 1.
This range of products has been designed with the ECO system: as the number
of users decreases, the power consumption of the system will decrease as
well.
When no users are connected and there’s no local mains, the consumption
will go down to 0A. In this case scenario, to see the DTT signal at least one
user must be connected to the system to power it.
Any signal must balanced to 75 ohms (Switch No. 2) in the last element of
the chain for the proper operation of the system.
This range allows control the output signal level of every user
individually. (Not available for the QUAD range)
This range of products has been designed as a complement to the former MSW
range, so any facility can be easily extended to more users, optimizing every
output signal.
The voltage/current can be activated/deactivated in the MSW amplif ers to
power pre-amplifiers, BOSS antennas, etc.. -
Read moreTELEVES
Nevoswitch 5x5x4 CASCADE5 In 4 Out c/w Output Earth Bar Only
2 Year Warranty
(May require a PSU: 12V1.5A PSU 732210)
*Special Order! NCNR – Check Lead Time*Cascadeable multiswitch equipped with 5 inputs (one terrestrial, and the
four polarities of one satellite), 4 user outputs, and a 12 dB potentiometer
per user output.
Can be used as a terminal (star topology) or as a cascade by using a simple
switch.Features:
One potentiometer (12 dB) on each of the user outputs to optimize the level
on an individual basis
A switch for either powering terrestrial pre-amplifiers or allowing current
circulation
Can be powered directly from the satellite receiver, without the need for a
power supply unit*
Remote power feeding using VL
Current circulation between all inputs and cascades
Active terrestrial
Very compact
Made of zamak
Input and output colour identification
Available ECO mode
Selector switch to shift between cascade and terminal modes
12v Power Supply
Low power consumption -
Read moreTELEVES
Nevoswitch 5x5x4 dSCRCascade 5 In 4 Out dSCR or Legacy c/w DC
(Earth Bars Not Included) 2 Year WarrantyMultiswitch equipped with 5 inputs (one passive terrestrial and the four
polarities of one satellite), and 4 user outputs that are compliant with SCR
I (EN50494), SCR II (EN 50607) and legacy mode, which makes it compatible
with any new or existing set top boxes.
Can be used as a terminal (star topology) or as a cascade by using a simple
switch.Furthermore, the exclusive DCFLEX functionality provides full
flexibility to the multiswitch by allowing the equipment to be powered from
anywhere in the system. The installer is free to choose the powering method
for the multiswitch, to better adapt to the requirements of any given
scenario. The versatility is provided by several control switches, but
essentially by the capacity of the multiswitch to be isolated from the
cascade (in terms of current) or not.Up to 16 user bands each user output
DCFLEX functionality, multiple powering options: From the power supply or
from the cascade through the satellite inputs or outputs
Easy to integrate in an existing system: By switching the SAT DC LINK to
OFF with the power supply connected, the MSW is locally powered without
adding nor taking power from the cascade
Brings higher security to the set top boxes connected to the multiswitch,
which are fully isolated from the power supply in the cascade
The TERR.DC ON switch isolates or connects the power supply available from
the cascade in the terrestrial branch. Can be useful for the feeding of a
mast amplifier or a BOSS antenna, but also for the terrestrial branches of
other MSW in the cascade
Wide voltage range: Voltages from 10 V to 20 V make it compatible with most
existing systems
Eco mode: Isolated from the cascade, the multiswitch can reduce power
consumption down to zero, when the set top boxes are disconnected and the
terrestrial passive
Equipped with the TForce technology, the terrestrial output level is
automatically adjusted to the optimal level
European design, quality, and manufacturing -
Read moreTELEVES Nevoswitch 5x5x6 CASCADE 5 In 6 Out c/w Output Earth Bar Only 2 Year
Warranty (May require a PSU: 12V1.5A PSU 732210) *Special Order! NCNR – Check
Lead Time* Cascadable multiswitch
equipped with 5 inputs (one terrestrial, and the four polarities of one
satellite), 6 user outputs, and a 12 dB potentiometer per user output. Can be
used as a terminal (star topology) or as a cascade by using a simple switch. Main Features: One potentiometer (12 dB) on each of the
user outputs to optimize the level on an individual basis A switch for either
powering terrestrial pre-amplifiers or allowing current circulation Can be
powered directly from the satellite receiver, without the need for a power
supply unit* Remote power feeding using VL Current circulation between all
inputs and cascades Active terrestrial European design, quality, and manufacturing
Very compact Made of zamak Input and output colour identification Available
ECO mode Selector switch to shift between cascade and terminal modes 12v
power supply Low power consumption -
Read moreTELEVES
Nevoswitch 5x5x8 dSCRCascade 5 In 8 Out dSCR or Legacy c/w DC
(Earth Bars Not Included) 2 Year Warranty
*Special Order! NCNR – Check Lead Time*(May require PSU: 732802)
-
Read moreTELEVES
Nevoswitch 8dB Tap5 In – 5 Trunk + 5 Tap Out 2 Year Warranty
2 Year Warranty
*Special Order! NCNR – Check Lead Time*CONFIGURABLE ELEMENTS FOR BETTER SIGNAL ADJUSTMENT
Highlights:
Chassis made of zamak: radiation inmune.
Suitable for star/cascade system configurations.
Independent Output Level adjustment (except QUAD compatible units).
Low consumption ECO mode. Thanks to the ECO system, the consumption
decreases as the number of users is reduced.Main Features:
Small size and compact design.
Cascadable and terminal configuration in a single reference.
Independent line-amplifier level adjustment.
Multiple powering options (Jack, VLow, Terrestrial Input/Output and user
outputs)
Independent output level adjustment. -
Read moreTELEVES
Nevoswitch 9×24 CASCADE-TERMINATED9 In 24 Out c/w Output Earth Bar Only
2 Year Warranty
*Special Order! NCNR – Check Lead Time*Multiswitch equipped with 9 inputs (one terrestrial and 8 for two satellites,
each with its four polarities) and 24 user outputs.
Can be used as a terminal (star topology) or as a cascade by using a simple
switch.Features:
10 dB Low Gain (LG) / High Gain (HG) switch for the attenuation of the
satellite input signal for each 8-user group
Remote power feeding using VL
Current circulation between all inputs and cascades
Compatible with return-channel applications
Very compact
Made of zamak
Input and output colour identification
Available ECO mode
Selector switch to shift between cascade and terminal modes
12 V power supply
Low power consumption -
Read moreTELEVES Nevoswitch 9×32
CASCADE-TERMINATED 9 In 32 Out c/w
Output Earth Bar Only 2 Year Warranty *Special Order! NCNR – Check Lead
Time* Multiswitch equipped with 9
inputs (one terrestrial and 8 for two satellites, each with its four
polarities) and 32 user outputs. Can be used as a terminal (star topology) or
as a cascade by using a simple switch.
Main Features: 10 dB Low Gain
(LG) / High Gain (HG) switch for the attenuation of the satellite input
signal for each 8-user group Remote power feeding using VL Current
circulation between all inputs and cascades Compatible with return-channel
applications European design, quality, and manufacturing Very compact Made of
zamak Input and output colour identification Available ECO mode Selector
switch to shift between cascade and terminal modes 12 V power supply Low
power consumption -
Read moreTELEVES Nevoswitch 9×9 CASCADE Launch
Amp 21dB SAT 17dB Terr – 2 Year
Warranty *Special Order! NCNR – Check Lead Time* NevoSwitch amplifier equipped with 9 inputs
(one terrestrial and the four polarities of two satellites) that allows
increasing the number of users in the installation while optimizing the
signal received by each of them. Around 27dB and 31dB amplification in
terrestrial and satellite respectively. Compatible with the return path
(passive). Main Features: High output level Switch for the selection
of whether or not to power the terrestrial pre-amplifiers (VDC or OFF) Gain
(20 dB) and slope (12 dB) individual adjustment Power feeding through the VL
input/output Very compact Made of zamak Input and output colour
identification 12 V power supply Low power consumption -
Read moreTELEVES Nevoswitch 9x9x12 CASCADE 9 In 12 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* Multiswitch equipped with 9 inputs (one
terrestrial and 8 for two satellites, each with its four polarities) and 12
user outputs. Can be used as a terminal (star topology) or as a cascade by
using a simple switch. Main
Features: 10 dB Low Gain (LG) / High
Gain (HG) switch for the attenuation of the satellite input signal for each
8-user group Remote power feeding using VL Current circulation between all
inputs and cascades Compatible with return-channel applications European
design, quality, and manufacturing Very compact Made of zamak Input and
output colour identification Available ECO mode Selector switch to shift
between cascade and terminal modes 12 V power supply Low power consumption -
Read moreTELEVES Nevoswitch 9x9x16 CASCADE 9 In 16 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* Part of the range of 9 input multiswitches
(8 satellite polarities + Freeview), available in 8, 12, 16, 24 and 32 user
outputs. Expand the number of users by cascading two or more units. Small and
compact design to provide an easy and quick installation. The range includes a 9x line amplifier with
25 dB average gain for Satellite inputs and 27 dB gain for Terrestrial with
DC pass. 75 ohms switch included to
load the unit (standalone) or not (cascade configurations). Highlights: Radiation immune thanks to its
zamak made chassis. All switch references are valid for standalone, star or
cascade configuration. Selectable IF gain (+10 dB) for each group or 8 users
to balance the output signals. Multiple powering options: mains and line
powered. ECO mode: the overall consumption is reduced as the number of users
decreases. Main features: Small sized
design: Make the most of space to accomodate more TV subscribers. Use the
same multiswitch in either star/cascade or standalone configuration.
Independent amplification of every feed (8 satellite plus Freeview). Multiple
powering options: mains and line powered. Adjustable gain and equalization to
achieve the best performance for every system’s requirements. -
Read moreTELEVES
Nevoswitch 9x9x8 CASCADE9 In 8 Out c/w Output Earth Bar Only
2 Year Warranty
*Special Order! NCNR – Check Lead Time*Part of the range of 9 input multiswitches (8 satellite polarities +
Freeview), available in 8, 12, 16, 24 and 32 user outputs. Expand the number
of users by cascading two or more units. Small and compact design to provide
an easy and quick installation.The range includes a 9x line amplifier with 25 dB average gain for Satellite
inputs and 27 dB gain for Terrestrial with DC pass.75 ohms switch included to load the unit (standalone) or not (cascade
configurations).Highlights:
Radiation immune thanks to its zamak made chassis.
All switch references are valid for standalone, star or cascade
configuration.
Selectable IF gain (+10 dB) for each group or 8 users to balance the output
signals.
Multiple powering options: mains and line powered.
ECO mode: the overall consumption is reduced as the number of users
decreases.
Main features:Small sized design: Make the most of space to accomodate more TV
subscribers.
Use the same multiswitch in either star/cascade or standalone configuration.
Independent amplification of every feed (8 satellite plus Freeview).
Multiple powering options: mains and line powered.
Adjustable gain and equalization to achieve the best performance for every
system’s requirements. -
Read moreTELEVES
Nevoswitch QUAD 5x5x12 CASCADEc/w 1.5A PSU – Receiver or Line Powered
(Earth Bars Not Included) 2 Year Warranty
*Special Order! NCNR – Check Lead Time*New range of input/multiple output switches from 4 to 32. It can be used as
a cascade element
since it has 5 outputs to connect to other switches and increase the number
of users.
It has the following powering options:Through the Power DC Jack (12 Vdc)
Through the V-Low input (12 Vdc).
Through the TERR input or output.
Applying 12 /18V at any user output.12V DC passes through the Terr and V-LOW input/output to power pre-amplif
ers, BOSS antennas, LNB or other elements (cascade).
The switch can generate the required voltage or voltage + tone (QUAD
references) so it’s compatible with any QUAD LNB.
The user can select the direction of the current/voltage through the TERR
input/output using the Switch No. 1.
This range of products has been designed with the ECO system: as the number
of users decreases, the power consumption of the system will decrease as
well.
When no users are connected and there’s no local mains, the consumption
will go down to 0A. In this case scenario, to see the DTT signal at least one
user must be connected to the system to power it.
Any signal must balanced to 75 ohms (Switch No. 2) in the last element of
the chain for the proper operation of the system.
This range allows control the output signal level of every user
individually. (Not available for the QUAD range)
This range of products has been designed as a complement to the former MSW
range, so any facility can be easily extended to more users, optimizing every
output signal.
The voltage/current can be activated/deactivated in the MSW amplif ers to
power pre-amplifiers, BOSS antennas, etc.. -
Read moreTELEVES
Nevoswitch QUAD 5x5x16 CASCADEc/w 1.5A PSU – Receiver or Line Powered
(Earth Bars Not Included) 2 Year Warranty
*Special Order! NCNR – Check Lead Time*Cascadable and quad compatible multiswitch, equipped with 5 inputs (one
terrestrial, and the four polarities of one satellite) and 16 user
outputs.
Can be used as a terminal (star topology) or as a cascade by using a simple
switch.Highlights:
12 V power supply included
A 22 kHz tone can be generated, which makes it compatible with any LNB,
including QUAD LNB.
A switch for either powering terrestrial pre-amplifiers or allowing current
circulation
Remote power feeding using VL
DC circulation from the inputs up
Active terrestrial
European design, quality, and manufacturingMain Features:
Very compact
Made of zamak
Input and output colour identification
Available ECO mode
Selector switch to shift between cascade and terminal modes
12 V power supply
Low power consumption -
Read moreTELEVES
Nevoswitch QUAD 5x5x24 CASCADEc/w 1.5A PSU – Receiver or Line Powered
(Earth Bars Not Included) 2 Year Warranty
*Special Order! NCNR – Check Lead Time*New range of input/multiple output switches from 4 to 32. It can be used as
a cascade element
since it has 5 outputs to connect to other switches and increase the number
of users.
It has the following powering options:Through the Power DC Jack (12 Vdc)
Through the V-Low input (12 Vdc).
Through the TERR input or output.
Applying 12 /18V at any user output.12V DC passes through the Terr and V-LOW input/output to power pre-amplif
ers, BOSS antennas, LNB or other elements (cascade).
The switch can generate the required voltage or voltage + tone (QUAD
references) so it’s compatible with any QUAD LNB.
The user can select the direction of the current/voltage through the TERR
input/output using the Switch No. 1.
This range of products has been designed with the ECO system: as the number
of users decreases, the power consumption of the system will decrease as
well.
When no users are connected and there’s no local mains, the consumption
will go down to 0A. In this case scenario, to see the DTT signal at least one
user must be connected to the system to power it.
Any signal must balanced to 75 ohms (Switch No. 2) in the last element of
the chain for the proper operation of the system.
This range allows control the output signal level of every user
individually. (Not available for the QUAD range)
This range of products has been designed as a complement to the former MSW
range, so any facility can be easily extended to more users, optimizing every
output signal.
The voltage/current can be activated/deactivated in the MSW amplif ers to
power pre-amplifiers, BOSS antennas, etc..
