1.5mm twin flat electrical cable – Kenya
KSh6,000.00
1.5mm twin flat electrical cable**
1.5mm twin flat electrical cable is a quality, well constructed product which is easily stripped and worked with.**General purpose T&E cable, mainly used in house wiring, power and lighting circuits, such as**fluorescent lighting**and**Office & Shop Lighting
1.5mm twin flat electrical cable specification
Conductor Size: 1.5mm
Nominal Diameter: 8.8mmx4.5mm
Cores: 2+E
Core Colours: Brown
Conductor Material: Grey Harmonised PVC
Conductor Material: Solid Copper
Voltage: <300/500V
Max Load: 18A
Operable Temperature: 0**C ** 70**C
** Conforms to BS6004 and BASEC approved.
twin flat 1.5mm** electrical cable
1.5mm twin flat electrical cable?
1.5mm twin flat electrical cable is a quality, well constructed product which is easily stripped and worked with.?General purpose T&E cable, mainly used in house wiring, power and lighting circuits, such as?fluorescent lighting?and?Office & Shop Lighting
1.5mm twin flat electrical cable specification
Conductor Size: 1.5mm
Nominal Diameter: 8.8mmx4.5mm
Cores: 2+E
Core Colours: Brown
Conductor Material: Grey Harmonised PVC
Conductor Material: Solid Copper
Voltage: <300/500V
Max Load: 18A
Operable Temperature: 0?C ? 70?C
? Conforms to BS6004 and BASEC approved.
twin flat 1.5mm? electrical cable
Related products
-
Add to cart12M razor Wire, 450mm Diameter
Flattrap razor Wire 12m best price from Mtech is of high quality and long-lasting, the razor wire is 12 metres long hence can go a long way when installing it on the wall. 12M Flat Trap razor Wire has spikes that discouraged unwanted individuals from going on top of a wall, they are easy to install since you just have to unrwap it on top of the wall.
12M Flat Trap razor Wire specifications
Wire type: wire #12.
Wire Low carbon steel 5.5mm pre galvanize SAE1008.
Standard: Commercial galvanized g/m2 40-50.
ASTM510.
JIS G3532, G3533.
Diameter: 7.41 mm ± 0.05 mm.
Barb diameter: 1.83 mm ± 0.05 mm.
Barb distance: 110 mm to 125 mm 8 or 9 a meter.
Breaking point: 310 Kg or better.
Reel weight: approx. 28.4 kg ± 1.3 kg.
Reel length: approx. 300mts.
Sagging or stretch: 4% or better.Galvanized razor barbed wire specifications:
Razor barbed wire (galvanized) BTO-10, cross type
Coil Diameter = 90cm.
No. of Lops/Coil = 39.
Clips = 19 x 5 clips.
Handles = 4, (2 each side).
Core wire 2.3mm (material #45).
Blade thickness = 0.4mm.
Packing water proof paper inside, weaving bag outside.
Each ten Coils tighten together as a Bundle.
Razor barbed wire (galvanized) BTO-22, cross type
Coil Diameter. = 60cm.
No. of Lops/Coil = 30.
Clips = 15 x 5 clips.
Handles = 4, (2 each side).
Core wire 2.3mm (material #45).
Blade thickness = 0.4mm.
Packing water proof paper inside, weaving bag outside.
Each ten coils tighten together as a bundle.
-
Electric fence digital voltmeter – Kenya
KSh18,000.00Add to cartElectric fence digital voltmeter
Electric fence digital voltmeter Quickly and easily obtains a digital reading of your fence voltage with the Gallagher Fence Volt Meter. Monitors fence voltage and helps trace shorts in the fence line. Electric fence digital voltmeter helps detect a short in your electric fence that occurs when the power escapes to the ground.
This can be caused by a broken underground cable, broken wire or insulator, a loose connection, or something touching the fence, such excessive vegetation. Digital Voltmeter can help you locate the source of a short by measuring the voltage in the fence line. You can also use the Neon Fence Tester, although it is not as accurate.
How to use Electric fence digital voltmeter
Attach it to the fence line, moving it laterally to get a good contact, and place the probe in the ground. You will see a reading on the screen – on a good electric fence line this should be in excess of 6,000 volts.
If the voltage is just slightly below normal – say 5,000 volts – then you probably have a small fault caused by light vegetation, for instance. However, if the reading is substantially lower, then a major fault exists.
To find this fault, move along the fence line, taking readings every 100 metres or so. As a rule of thumb, the voltage will drop roughly 100 volts every 100 metres as you head in the direction of the fault, and will then level out once you pass the fault.
If the fault is not obvious, you should systematically isolate areas of your electic fence using cut-out switches. Once you have located the problem area, you may have to isolate individual wires to pinpoint the problem.
Electric fence digital voltmeter
Electric fence digital voltmeter specifications
Part Number MLD-003
Item Weight 3 ounces
Product Dimensions 7.01 x 1.3 x 2.76 inches
Item model number MLD-003
Is Discontinued By Manufacturer No
Size 17.8*7.0*3.3cm
Color Black
Material ABS
Shape Rectangle
Power Source Battery-powered
Voltage 9900 volts
Handle Material Plastic
Display Style LCD
Batteries Included** No
Batteries Required** No
Pile 9V.6F22or equivalent -
Stafix AM1 Alarm Monitor
KSh23,000.00Add to cartDescription
Stafix AM1 Alarm MonitorStafix AM1 Alarm Monitor from Mtech Networks Nairobi, At Mtech we have all-electric fencing solutions you may require to safeguard your property.
Stafix AM1 Alarm Monitor unit pulses and operates like a normal electric fence energizer, except that the voltages are under 50 V, making it intrinsically safe and below any perceived dangerous high voltages.
Stafix AM1 Alarm Monitor has been a huge success as installers faced with sites under the new SANS electric fencing act, that were deemed dangerous as high voltage wires were exposed to public access areas, now have a solution.
Stafix AM1 Alarm Monitor installers were previously faced with either removing the fence or installing an expensive barrier fence. With the ZLM monitors, fence sections below 1.5 m could be wired into the JVA monitor and still be fully monitored and alarmed without any dangerous shocks.
Stafix AM1 Alarm Monitor has been very successful with many housing estates, industrial companies and old age homes. Even some government organizations have replaced certain energizers in their systems with JVA ZLM units to achieve their COC compliance.
Stafix AM1 Alarm Monitor TCP/IP interface and networkability, the ZLM4 is able to slot into any already networked perimeter patrol system.
Stafix AM1 Alarm Monitor specifications
Create multiple zones/sectors
Dynamic fence voltage monitoring
LED displays fence status
Relays for siren/strobe
Adjustable fence voltage delay and trip settings
12 V battery powered. -
-
Reviews
There are no reviews yet.