DTT DAT BOSS 42dB LTE 5G + Power Supply + 20m Cable
DTT Kit Antenna DAT BOSS LTE 5G + Power Supply + 20m Coaxial Cable Televes
With this kit you can install DTT television adapted to the 2nd Digital Dividend in a single-family home.
This kit consists of the following Televes equipment: DAT BOSS 149921 antenna, with 42dB of gain and 5G LTE; 5795 2-way power supply and 20 meter roll of 435501 white coaxial cable.
The DAT BOSS antenna integrates an automatic gain control that offers an always optimal and stable output in any meteorological condition.
UHF-DTT Kit DAT BOSS LTE 5G Antenna + 2 Output 24Vdc Power Supply + 20m Coaxial Cable
What does the TDT0011 kit from TDTprofesional include?
DTT antenna DAT BOSS Televes 149921
24Vdc Televes 5795 power supply
20 meters of coaxial cable Televes 435501
What technical characteristics does the Televes 149921 UHF Antenna have?
It allows you to receive quality television in a wide variety of critical situations, from areas with very weak signals to facilities with high reception levels
Increases land coverage area by up to 27% over previous models
It has a more stable reception, being able to withstand signal variations or fading or fadding without affecting the TV installation
Optimal signal-to-noise ratio thanks to a noise figure of only 1.2dB that respects the quality of the received signal
Very high gain thanks to TForce technology gives the BOSS an increase of up to 13dB, reaching 45dBi in smart mode
What technical characteristics does the Televes 5795 power supply have?
Its design is based on the use of the latest generation microcomponents (1mm x 0.5mm) that allow reducing the size of the devices as well as their electrical consumption. Fully robotic manufacturing
The small size makes them discreet and ideal for installation in registers of 100×100 and smaller
The source ref. 5795 has two asymmetric RF outputs where one can be directly connected to a television and the other output to a distribution network
The new PicoKom series, consisting of two power supplies and a home amplifier, is a further step in the design and production of household products
Small dimensions (90x67x28mm) to fit in any junction box
High efficiency feeding mode
Low consumption
Related products
-
Read moreTELEVES Nevoswitch 9x9x12 CASCADE 9 In 12 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* Multiswitch equipped with 9 inputs (one
terrestrial and 8 for two satellites, each with its four polarities) and 12
user outputs. Can be used as a terminal (star topology) or as a cascade by
using a simple switch. Main
Features: 10 dB Low Gain (LG) / High
Gain (HG) switch for the attenuation of the satellite input signal for each
8-user group Remote power feeding using VL Current circulation between all
inputs and cascades Compatible with return-channel applications European
design, quality, and manufacturing Very compact Made of zamak Input and
output colour identification Available ECO mode Selector switch to shift
between cascade and terminal modes 12 V power supply Low power consumption -
Read moreTELEVES Nevoswitch 17x17x8 CASCADE 17 In 8 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* Highlights:
10 dB Low Gain (LG) / High Gain (HG) switch for the attenuation of the
satellite input signal for each 8-user group Remote power feeding using VL
Current circulation between all inputs and cascades Compatible with
return-channel applications European design, quality, and manufacturing Main features: Very compact Made of zamak Input and output
colour identification Available ECO mode Selector switch to shift between cascade
and terminal modes 12 V power supply Low power consumption -
Read moreTELEVES Euroswitch 9x9x8 CASCADE 9 In 8 Out c/w Output Earth Bar Only 2 Year
Warranty *Special Order! NCNR – Check Lead Time* Compact multiswitch equipped with 9 inputs
(one terrestrial and 8 for two satellites, each with its four polarities) and
8 user outputs. Thanks to its great
compactness and its optimized electronic design, it presents very low through
and tap losses. This allows to reduce the number of amplifiers needed in the
cascade and to obtain a better balanced signal in the users, even in large
collective installations. Can be used
as a terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant. Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour
identification -
Read moreTELEVES Nevoswitch QUAD 9x9x8
CASCADE c/w 1.5A PSU – Receiver or
Line Powered (Earth Bars Not Included) 2 Year Warranty *Special Order! NCNR –
Check Lead Time* Highlights 10 dB Low Gain (LG) / High Gain (HG) switch
for the attenuation of the satellite input signal for each 8-user group
Optimized for Quad LNB thanks to a 22 KHz generator Compatible with
return-channel applications European design, quality, and manufacturing Main features Very compact Made of zamak Input and output
colour identification Available ECO mode Selector switch to shift between cascade
and terminal modes 12 V power supply Low power consumption -
Read moreTELEVES Euroswitch 17x17x24 CASCADE 17 In 24 Out – 2 Year Warranty *Special
Order! NCNR – Check Lead Time* Compact
multiswitch equipped with 17 inputs (one terrestrial and 16 for four
satellites, each with its four polarities) and 24 user outputs. Thanks to its great compactness and its
optimized electronic design, it presents very low through and tap losses.
This allows to reduce the number of amplifiers needed in the cascade and to
obtain a better balanced signal in the users, even in large collective
installations. Can be used as a
terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour
identification
Reviews
There are no reviews yet.