Support for screw-type mast L 300mm.
Support Mast Wall Screw & quot; L & quot; 300mm. Ref. 2401 Televes.
mast bracket to screw it to the wall, to place it on the outside wall of the house or in the inner wall of the roof. Its length is 30cm making it ideal if you do not mind the cornice or poured water can also be found in reference TEL2404 is a longer model.
Related products
-
Read moreTELEVES Euroswitch 17x17x32 CASCADE 17 In 32 Out – 2 Year Warranty *Special
Order! NCNR – Check Lead Time* Compact
multiswitch equipped with 17 inputs (one terrestrial and 16 for four
satellites, each with its four polarities) and 32 user outputs. Thanks to its great compactness and its
optimized electronic design, it presents very low through and tap losses.
This allows to reduce the number of amplifiers needed in the cascade and to
obtain a better balanced signal in the users, even in large collective
installations. Can be used as a
terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour
identification -
Read moreTELEVES Nevoswitch 5x5x6 CASCADE 5 In 6 Out c/w Output Earth Bar Only 2 Year
Warranty (May require a PSU: 12V1.5A PSU 732210) *Special Order! NCNR – Check
Lead Time* Cascadable multiswitch
equipped with 5 inputs (one terrestrial, and the four polarities of one
satellite), 6 user outputs, and a 12 dB potentiometer per user output. Can be
used as a terminal (star topology) or as a cascade by using a simple switch. Main Features: One potentiometer (12 dB) on each of the
user outputs to optimize the level on an individual basis A switch for either
powering terrestrial pre-amplifiers or allowing current circulation Can be
powered directly from the satellite receiver, without the need for a power
supply unit* Remote power feeding using VL Current circulation between all
inputs and cascades Active terrestrial European design, quality, and manufacturing
Very compact Made of zamak Input and output colour identification Available
ECO mode Selector switch to shift between cascade and terminal modes 12v
power supply Low power consumption -
Read moreTELEVES Nevoswitch QUAD 9x9x8
CASCADE c/w 1.5A PSU – Receiver or
Line Powered (Earth Bars Not Included) 2 Year Warranty *Special Order! NCNR –
Check Lead Time* Highlights 10 dB Low Gain (LG) / High Gain (HG) switch
for the attenuation of the satellite input signal for each 8-user group
Optimized for Quad LNB thanks to a 22 KHz generator Compatible with
return-channel applications European design, quality, and manufacturing Main features Very compact Made of zamak Input and output
colour identification Available ECO mode Selector switch to shift between cascade
and terminal modes 12 V power supply Low power consumption -
Read moreTELEVES Nevoswitch 9×9 CASCADE Launch
Amp 21dB SAT 17dB Terr – 2 Year
Warranty *Special Order! NCNR – Check Lead Time* NevoSwitch amplifier equipped with 9 inputs
(one terrestrial and the four polarities of two satellites) that allows
increasing the number of users in the installation while optimizing the
signal received by each of them. Around 27dB and 31dB amplification in
terrestrial and satellite respectively. Compatible with the return path
(passive). Main Features: High output level Switch for the selection
of whether or not to power the terrestrial pre-amplifiers (VDC or OFF) Gain
(20 dB) and slope (12 dB) individual adjustment Power feeding through the VL
input/output Very compact Made of zamak Input and output colour
identification 12 V power supply Low power consumption -
Read moreTELEVES Euroswitch 17x17x8 CASCADE 17 In 8 Out – 2 Year Warranty *Special
Order! NCNR – Check Lead Time* Compact
multiswitch equipped with 17 inputs (one terrestrial and 16 for four
satellites, each with its four polarities) and 8 user outputs. Thanks to its great compactness and its
optimized electronic design, it presents very low through and tap losses.
This allows to reduce the number of amplifiers needed in the cascade and to
obtain a better balanced signal in the users, even in large collective
installations. Can be used as a
terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour
identification
Reviews
There are no reviews yet.