Tech-com 650VA UPS
KSh5,000.00
Description
Description
Power disruption and power surges can be very costly for every business, with destruction to equipment to low production in a business resulting to less sales and poor customer satisfaction incase of service delivery organisation. Mtech is here to change that with UPS that can help run small equipment up to 4 hours and also prevent them from being damaged by the power surge.
Tech-com 650VA UPS specificatioons
360 Watts
12V7AH 1 Pcs Battery
Input Voltage: 230VAC
Voltage Range: 140 – 300 VAC
Frequency Range: 50 Hz / 60 Hz
Advanced Boost and buck AVR for voltage regulation
Related products
-
Add to cartDescription
Mecer 2000VA 2KVA 1800W Rackmount UPS, (ME-2000-WPRU)
Model: Mecer ME-2000-WPRU
Type: Online Double Conversion UPS
Topology: True Online Double Conversion
Form Factor: Rackmount
Capacity:
Power Capacity: 2000VA / 1800W,
Input Voltage Range: 110 – 300VAC (depending on load)
Output Voltage: 220/230/240VAC (Selectable)
Input Frequency Range: 40 – 70Hz (Auto Sensing)
Output Frequency: 50Hz or 60Hz (Auto Sensing)
Power Factor: 0.9
Battery:
Battery Type: Sealed Lead-Acid Maintenance-Free
Battery Quantity: Typically 4 batteries (12V/9Ah)
Battery Voltage: 48VDC
Backup Time: Varies depending on load (e.g., approximately 4-5 minutes at full load)
Recharge Time: 4-6 hours to 90% capacity
Battery Management: Intelligent Battery Management for optimized performance and longevity
Features:
Efficiency: Up to 90% in Online Mode, 95% in ECO Mode
Waveform Type: Pure Sine Wave
Transfer Time: Zero (Online Double Conversion)
Noise Level: < 50dB at 1 meter LCD Display: Yes (displays input/output voltage, frequency, battery level, load level, etc.) Audible Alarm: Yes (overload, battery low, etc.) Communication Ports: USB, RS232, SNMP (optional) ECO Mode: Yes (energy-saving mode) Cold Start Function: Yes (starts the UPS without utility power) Auto Restart: Yes (automatically restarts the UPS when AC is recovering) Protection: Overload Protection: Yes Short Circuit Protection: Yes Surge Protection: Yes Overcharge Protection: Yes Deep Discharge Protection: Yes Physical Specifications: Rack Size: 2U Dimensions (W x D x H): Approximately 438 x 410 x 88 mm Weight: Approximately 18 kg (may vary slightly based on battery configuration) Environmental: Operating Temperature: 0°C – 40°C Operating Humidity: 0% – 95% RH (non-condensing) Storage Temperature: -15°C – 50°C Certifications: Safety Compliance: CE, ISO 9001 Additional Features: Hot-swappable Batteries: Yes Bypass Mode: Yes (Automatic Bypass) Remote Monitoring: Optional via SNMP (requires additional SNMP card) -
Add to cart10KVA APC Smart-UPS SRT 10000VA 230V SRT10KXLI
10KVA APC Smart-UPS SRT 10000VA 230V SRT10KXLI Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
APC Smart-UPS SRT 10000VA UPS automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. APC Smart-UPS SRT 10000VA UPS Plug and play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
APC Smart-UPS SRT 10000VA replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Manageability
LED status indicatorsQuickly understand unit and power status with visual indicators.
Serial connectivityProvides management of the UPS via a serial port.
InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.
Network manageableMost models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
SmartSlotCustomize UPS capabilities with management cards.
Serviceability
Audible alarmsProvides notification of changing utility power and UPS power conditions
Disconnected battery notificationWarns when a battery is not available to provide backup power.
Predictive failure notification.Provides early-warning fault analysis ensuring proactive component replacement.
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Protection
Cold-start capableProvides temporary battery power when the utility power is out.
Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
APC Smart-UPS SRT 10000VA UPS specifications
Lead time
Usually in Stock
General
provided equipment
CD with software Documentation CD Installation guide Temperature probe USB cable Warranty card Web/SNMP management card
Physical
colour
Black
depth
71.5 cm
height
43.2 cm
net weight
111.82 kg
width
26.3 cm
Input
network frequency
40…70 Hz auto-sensing
number of input connectors
1 hard wire 3-wire (1P + N + E) 1 hard wire 5-wire (3P + N + E)
input voltage limits
100…275 V adjustable (half load) 173…476 V adjustable (half load) 160…275 V
inputvolt_other
220 V 240 V 380 V 415 V
input voltage
230 V 400 V 3 phases
Output
rated power in W
10000 W
Maximum configurable power in W
10000 W
harmonic distortion
Less than 2 %
output frequency
50/60 Hz +/- 3 Hz sync to mains
outputvolt_other
220 V 240 V
crest factor
3 : 1
UPS type
Double conversion online
Wave type
Sine wave
output connector type
Hard wire 3-wire (H N + E) 1
nb of power socket outlets
6 IEC 60320 C13 3 IEC Jumpers 4 IEC 60320 C19
bypass type
Internal bypass (automatic and manual)
output voltage
230 V
Conformance
product certifications
CE EAC IRAM RCM VDE
standards
EN/IEC 62040-1 EN/IEC 62040-2
marking
CE Mark
Environmental
ambient air temperature for operation
0…40 °C
relative humidity
0…95 %
operating altitude
0…10000 ft
ambient air temperature for storage
-15…45 °C
storage altitude
0.00…15240.00 m
acoustic level
55 dBA
heat dissipation
1947 Btu/h
IP degree of protection
IP20
Batteries & Runtime
battery type
Lead-acid battery
number of battery filled slots
0
Battery recharge time
1.5 h
number of battery replacement quantity
2
liquid value
0
battery voltage
+/- 192 V (split battery referenced to neutral)
Communications & Management
free slots
1
control panel
Multifunction LCD status and control console
alarm
Audible and visible alarms prioritized by severity
Emergency power off
Yes
Surge Protection and Filtering
Surge energy rate
480 J
Packing Units
Package 1 Weight
126.82 kg
Package 1 Height
46.1 cm
Package 1 width
60 cm
Package 1 Length
100 cm
Offer Sustainability
EU RoHS Directive
Compliant EU RoHS Declaration
Mercury free
Yes
RoHS exemption information
Yes
WEEE
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Optimized Energy Efficiency
Energy efficient product -
Mecer 2KVA Line Interactive UPS
KSh28,000.00Add to cartDescription
2KVA Mecer Line Interactive UPSMecer 2KVA Line Interactive UPS with AVR, Built-in Surge Protection, without Software (Optional USB Port) 1 x12V 7Ah battery will protect your most trusted assets from being damaged by a power surge, short circuit, and unreliable currents.
Mecer 2KVA UPS buy from Mtech Networks and have it delivered to you. we also sell replacements batteries for mecer UPS that is 12V 7AH UPS replacement battery at affordable prices.
2KVA Mecer UPS will keep you performing since the UPS gives you ample time to continue working even when there are power interruptions, Mecer 2KVA UPS has a lead time of more than 15 minutes which enables the user to conclude task started When used together with commercial batteries and inverters, Mecer UPS creates a very powerful and essential power backup for any organisations.
Mecer 2000VA UPS Specifications
Capacity: 2KVA (2000VA)
Technology: Line Interactive UPS.
Input Voltage: 220VAC
Input Voltage Range: 145VAC – 290VAC
Output Voltage: 220VAC ± 10%
Output Frequency: 50Hz/60Hz (Auto Sensing)
Transfer Time: < 10ms Waveform: Simulated Sine Wave Battery Type: Sealed Lead Acid (Maintenance-free) Battery Backup Time: Depends on load and battery capacity Recharge Time: 4-6 hours to 90% capacity Protection: Overload, Short Circuit, Surge, and Voltage Regulation Communication Ports: USB, RS232, SNMP (Optional). Software: Power Management Software included LCD Display: Provides real-time UPS status information Audible Alarms: Battery Low, Battery Disconnected, Overload, Fault Dimensions: Varies based on model Weight: Varies based on model Conclusions The Mecer ME-2000-VU Line Interactive 2KVA UPS is a reliable and efficient power backup solution for small to medium-sized applications. With a capacity of 2KVA (2000VA), it offers ample power to keep your critical equipment running during power outages or fluctuations. The line interactive UPS technology ensures effective voltage regulation and protection against power surges, spikes, and sags. -
APC 700VA Back-up UPS- Black – Kenya
KSh14,000.00Add to cartAPC 700VA Back-up UPS- Black
APC 700VA Back-up UPS- Black has an automatic voltage regulation hence when connected to device it will protect them to the maximum, The 700VA UPS from mtech can be connected to the devices by the use of USB, this means gadgets like phone and tablets can be directly connected to the APC UPS.
700VA APC UPS has a telephone data line protection hence won’t interfere with the frequency. it comes with intelligent battery management hence one can replace its battery and not the whole product.
APC Back-UPS 700va Specifications
Output power capacity:390Watts / 700VA
Max Configurable Power (Watts): 390Watts / 700VA
Nominal Output Voltage:230V
Output Frequency (sync to mains):50/60 Hz +/-1 Hz
Topology:Line Interactive
Waveform type:Stepped approximation to a sinewave
Output Connections,(1) IEC Jumpers (Battery Backup), (4) IEC 320 C13 (Battery Backup)
Transfer Time: 4ms typical
Nominal Input Voltage:230V
Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections:IEC-320 C14
Cord Length:1.22meters
Input voltage range for main operations:140 – 300V
Number of Power Cords
Battery type:Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time:6hour(s)
Expected Battery Life (years):3 – 5
Runtime: 50minutes
Interface Port(s): USB
Control panel: LED status display with On Line : On Battery : Replace Battery and Overload indicators
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge energy rating:273Joules
Data Line Protection: RJ-11 Modem/Fax/DSL protection (two wire single line)
Maximum Height:200mm , 20.0CM
Maximum Width:115mm , 11.5CM
Maximum Depth:256mm , 25.6CM
Net Weight: 6.0KG
Shipping weight: 6.5KG
Shipping Height: 275mm , 27.5CM
Shipping Width:295mm , 29.5CM
Shipping Depth: 340mm , 34.0CM
Operating Temperature:0 – 40 °C
Operating Relative Humidity:0 – 95% non-condensing %
Operating Elevation:0-3000meters
Storage Temperature:-15 – 40 °C
Storage Relative Humidity:0 – 95% non-condensing %
Storage Elevation:0-9000meters
Audible noise at 1 meter from surface of unit:45.0dBA
APC Back-UPS 700 – 700VA – 4 Outlets – Black
700VA APC UPS price
Buy 700VA APC UPS in Kenya
700VA APC UPS replacement battery
700VA APC UPS
APC Back-UPS 700VA (BX700UI)
APC Back-UPS BX – BX700UI
BX700U-MS – APC Back-UPS 700VA, 230V, AVR
Buy APC Back-UPS 700 – 700VA – 4 Outlets – Black @ Best Price
APC Back-UPS 700VA 230V AVR IEC Sockets BX700UI
APC BACK – UPS 700VA 230V -
APC 750VA Smart Value, SMV750I-MS UPS – Kenya
KSh40,000.00Add to cart750VA APC Smart Value SMV750I-MS UPS
750VA APC Smart Value SMV750I-MS UPS Easy UPS SMV is built with resilient sheet metal that rigidly holds and protects critical electrical components.
APC Smart Value SMV750I-MS UPS Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. SMV750I-MS UPS Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
SMV750I-MS UPS pure form of sinewave designed to emulate utility power, will support your device upon battery backup. SMV750I-MS UPS Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Reviews
There are no reviews yet.