Starlink Performance (Gen 3) Kit In Viet Nam
KSh500,000.00
The Starlink Performance (Gen 3) kit is designed to deliver connectivity with download speeds of up to 400 Mbps, which is higher than previous versions. This Performance kit features a separate Advanced Power Supply and a durable, powder-coated aluminum enclosure, ensuring resilience in remote areas and harsh environments on land and at sea, including extreme weather conditions, high-vibration settings, and during in-motion usage.
Starlink Performance Kit
- Capable of download speeds up to 400+ Mbps for fast, reliable connectivity whenever you need it.
- Capable of enduring winds up to 270+ kph (170+ mph) and temperatures from -40°C to 60°C (-40°F to 140°F).
- Enhanced snow melting capacity, featuring an IP68 (unplugged) – IP69K (plugged) waterproof rating.
- Suitable for 1 meter of water submersion for up to 30 minutes and pressure washing.
Starlink Performance Gen 3 Includes:
- Starlink Performance Dish
- Advanced Power Supply
- Starlink Performance Cable 25m (82ft)
- Starlink Ethernet Cable 5m (16.4ft)
- Starlink AC Power Cable 1.5m (4.9ft)
- Starlink DC Power Cable 1.5m (4.9ft)
- Package Dimensions: 686 x 454 x 121 mm (27.0 x 17.9 x 4.8 in)
- Package Weight: 11.8 kg (26 lbs)
- Does not include any taxes, VAT, import duties, or other fees. These are to be paid by the customer separately, where applicable
Starlink Performance (Gen 3) Kit – Setup Guide
Helpful Tools
The Starlink Performance (Gen 3) Kit has a white film on the front face that should not be removed.
- Setup Guide PDF
- Starlink Performance Durability Guide
- Starlink Performance Specs Guide (PDF) / Starlink Performance Specs (webpage)
- Accessory Guide PDF
- Where is the Starlink Performance Kit available?
- How can I upgrade to the Starlink Performance Kit?
- Does Starlink Performance come with a separate router?
- What happened to the Actuated High Performance and Flat High Performance names?
- Wall Mount: Install Guide PDF
- Flat Mount: Install Guide PDF
- Wedge Mount: Install Guide PDF
- Pipe Adapter: Install Guide PDF
- Performance Gen 3 Router Kit: Install Guide PDF
What’s included with my Starlink Performance Kit?
- Starlink Performance
- Advanced Power Supply
- 25m Starlink Performance Cable
- 5m Ethernet Cable
- 1.5m AC Power Cable
- 1.5m DC Power Cable
1. Download the Starlink App
Download the Starlink App and scan the QR code to step through the install process
2. Plug in Cables and Connect to Power
Align the Performance Connector end of the Starlink cable indicated by the red notch and plug into your Starlink by holding the end of the plug and firmly inserting into the dish. When the cable is properly inserted, it will audibly click into place.
Connect the other end of the Starlink cable to the power supply. Install either the AC (2A) or DC (2B) Power Cable into the power supply, depending on your power source, and plug into a power outlet. Ensure all cables are fully plugged in until the plug face is flush with the surface.
If needed, to remove the Starlink cable, rotate the collar counterclockwise and pull out to disconnect from your Starlink
3. Find Mounting Location and Align Starlink
Your Starlink needs a clear view of the sky so it can stay connected with satellites as they move overhead. Objects that obstruct the connection between your Starlink and the satellite, such as a tree branch, pole, or roof, will cause service interruptions. Use the obstruction tool in the App to ensure you have selected a suitable mounting location.
An alert on the App will show if you need to rotate Starlink to be properly aligned. Tap the alert to use the alignment tool.
Ensure to check for obstructions and your Starlink is properly aligned before permanently installing your Starlink.
4. Connect Starlink
If using a Starlink Router, connect the Router to the Advanced Power Supply using the cable provided in the router kit. Step through the Starlink install process on the Starlink App. You can utilize the Starlink App to view statistics, access terminal settings and contact support.
If using a third-party router, use the provided ethernet cable in the Performance Kit. After you have set up your 3rd party router and connected to Starlink with the WAN port, open the Starlink app. If the app says “Starlink unreachable”, create a static route in your router configuration settings.
Please refer to your router’s documentation for instructions on setting a static route.
- Network destination: 192.168.100.0
- Subnet Mask: 255.255.255.0
- Gateway: 192.168.100.1
- Interface: WAN
Note: These options may differ depending on your specific hardware and network configuration.
ADVANCED POWER SUPPLY UNIT
1. Remove Mount
Remove the power supply from the mount by pulling and twisting the quick release pins in either direction. The pins will lock in place to allow for easy removal of the power supply
2. Mark Pilot Holes
Select a mount location no more than 1.5 m (5ft) away from your power source.
Mark the location of the four holes on your power supply mount using a pen or pencil.
3. Drill the Pilot Holes
Drill the holes with a 8 mm (5/16 in) drill bit.
4. Install Anchors and Mount
Push anchors into holes until flush with the wall. Place the wall mount over the anchors and screw the mount into the wall until securely attached.
5. Plug In Cables and Install Power Supply
Plug in the Starlink, ethernet and AC or DC cables into the power supply by removing the waterproof plugs and ensure the cables are fully inserted. Slide the power supply into the mount, making sure both locking pins snaps into place.
Finish installation by routing the Ethernet cable to your router install location, connect to router and plug in router and power supply into your power source.
Can’t find what you’re looking for? Contact Support.
| Download Name | |
| Starlink STLXX01126 Performance (Gen 3) Kit Datasheet | |
| Starlink STLXX01126 Performance (Gen 3) Kit Installation Guide | |
| Starlink Availability Map | |
| LEO Orbit Constellations | |
| Versions Comparison | ||||
 |
 |
 |
 |
|
| Starlink Performance (Gen 3) Kit | Starlink Performance (Gen 2) Kit | Starlink Enterprise Kit | Starlink Standard Kit | |
| Peak Throughput | 475 Mbps Download / 75 Mbps Upload | 450 Mbps Download / 60 Mbps Upload | 475 Mbps Download / 70 Mbps Upload | |
| Field of View | 140° | 140° | 110° | 110° |
| Starlink Environmental Rating | IP69K (with cables installed) / IP68 (no cables installed) | IP56 (with cables installed) / Not Rated (no cables installed) | IP67 Type 4 | IP67 Type 4 (with cables installed) / Not Rated (no cables installed) |
| Power Supply Environmental Rating | IP68 (with cables installed or plugged) | IP66 | IP66 | IP66 Type 4 |
| Starlink Operating Temperature | -40°C to 60°C (-40°F to 140°F) | -30°C to 50°C (-22°F to 122°F) | -30°C to 50°C (-22°F to 122°F) | -30°C to 50°C (-22°F to 122°F) |
| Snow Melt Capability | Up to 85mm / hour (3.5 in / hour) | Up to 75mm / hour (3in / hour) | Up to 40 mm / hour (1.5 in / hour) | Up to 40 mm / hour (1.5 in / hour) |
| Wind Speed Rating | Survivable: 280 kph+ (174 mph+) | Survivable: 280 kph+ (174 mph+) | Operational: 96 kph+ (60 mph+) | Survivable: 177 kph+ (110 mph+) |
| Power Specifications | 100-240VAC, 12V-56VDC | 100-240V AC | 100-240V AC | 100-240V AC |
| Average Power Draw | 70 W | 110 W | 75 – 100 W | 62 W |
| Router Compatibility | Third-party compatible | Third-party compatible | Third-party compatible | Requires Advanced Power Supply to support third-party routers |
| Available Cable Lengths | 5m, 25m*, 50m, 50m LSZH (* included in kit) | 2m, 8m, 25m* (* included in kit) | 15m*, 50m (* included in kit) | |
| Cable Connectors | Starlink Performance to Starlink RJ45 / Able to field terminate | High Performance Starlink Connector to Starlink Gen2 Router Connector | Starlink RJ45 to Starlink RJ | |
| Warranty Length | 3 Years | 2 Years | 1 Year | 1 Year |
| Brand |
|---|
Reviews
There are no reviews yet.