Showing the single result

• 

  APC Smart-UPS VT 20kVA 400V 6 .0 kWatts SUVTP20KH4B4S UPS – Kenya

  KSh1,700,000.00

  APC Smart-UPS VT 20kVA 400V 6 .0 kWatts SUVTP20KH4B4S UPS 

  APC Smart-UPS VT 20kVA 400V 6 .0 kWatts SUVTP20KH4B4S UPS comes with high density, double-conversion on-line power protection with scalable runtime. 20KVA APC UPS Increases total power capacity by using multiple uninterruptible power supplies simultaneously.

   

  Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy. APC 20KVA UPS ensures clean uninterrupted power to protected equipment. It provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.

   

  APC Smart-UPS VT 20kVA is generator compatible and supports the replacement of the batteries when week. APC Smart-UPS VT 20kVA protects connected loads from surges, spikes, lightning, and other power disturbances. The 20kva Ups also provides temporary battery power when the utility power is out.

   

  Hence it is Cold-start capable APC Intelligent battery management ensures maximum battery performance and life through intelligent, precision temperature compensated battery charging. APC Smart-UPS VT 20kVA UPS comes with automatic self tests insure battery reliability. It also warn customers in advance of battery replacement.

   

  Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. 20kVA APC Smart-UPS provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies.

   

  20kVA APC Smart-UPS Safety-agency approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards. 20kVA APC Smart-UPS ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

   

  20kVA APC Smart-UPS offer services that Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).

  APC Smart-UPS VT 20kVA ups specifications
  Output power capacity: 16.0 KWatts / 20.0 kVA
  Max Configurable Power (Watts): 16.0 KWatts / 20.0 kVA
  Nominal Output Voltage: 400V 3PH
  Output Voltage Note: Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
  Efficiency at Full Load: 95.3 %
  Output Voltage Distortion: Less than 5% at full load
  Output Frequency (sync to mains): 47 – 53 Hz for 50 Hz nominal
  Output Frequency (not synced): 50Hz +/- 0.1% for 50Hz nominal
  Other Output Voltages: 380, 415
  Load Crest Factor: 3 : 1
  Topology: Double Conversion Online
  Waveform type: Sine wave
  Maximum Output Current: 32
  Bypass: Built-in Maintenance Bypass, Built-in Static Bypass
  Nominal Input Voltage: 400V 3PH
  Input frequency: 40 – 70 Hz (auto sensing)
  Input Connections: Hard Wire 5-wire (3PH + N + G)
  Input voltage range for main operations: 304 – 477V
  Efficiency at Full Load: 95.3 %
  Other Input Voltages: 380, 415
  Maximum Input Current: 27.0A
  Input Power Factor at Full Load: 0.98
  Battery type: VRLA
  Included Battery Modules: 4
  Typical recharge time: 5hour(s)
  Nominal Battery Voltage: +/-192 V (split battery referenced to neutral)
  Expected Battery Life (years): 3 – 5
  RBC Quantity: 4
  Extendable Run Time: 1
  Interface Port(s): DB-9 RS-232 , Smart-Slot
  Pre-Installed SmartSlot™ Cards: AP9631
  Control panel: Multi-function LCD status and control console
  Audible Alarm: Audible and visible alarms prioritized by severity
  Emergency Power Off (EPO): Yes

  Add to cart

  Quick View