1X16 Bare PLC Steel Tube 250µm Single Mode Fiber Splitter – Kenya
KSh7,100.00
1X16 Bare PLC Steel Tube 250µm Single Mode Fiber Splitter
1X16 Bare PLC Steel Tube 250µm Single Mode Fiber Splitter from the leading fiber dealer in Nairobi Kenya, buy 1X16 Bare PLC Steel Tube 250µm Single Mode Fiber Splitter and have it delivered.
PLC splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. 1X16 Bare PLC Steel Tube 250µm Single Mode Fiber is a kind of ODN product suitable for PON networks that can be installed in the pigtail cassette, test instrument and WDM system, which minimizes the space occupation.
1X16 Bare PLC Steel Tube 250µm Single Mode Fiber is relatively fragile on fiber protection and need a complete protection design on carrying box body and device.
Name of the test
Condition
Duration
Temperature- Humidity aging
85°C and 85% RH
7 days
Vibration
10 – 55Hz, 1.52mm double amplitude, in three axes
1 hour
Component Impact
Test Impact of 500g (mass ? 0.125kg), 1ms , half sine pulse
2 impacts
Temperature Cycling Test
-40 – 70°C, Ramp rate: 1°C /min, Dwell time > 15min
10 cycles
Temperature- Humidity cycling
-40 – 85°C , between 10°C and 23°C – 85% RH, at 85°C – 20%RH, between °C and 85°C – maintain a linear change in RH, below 10°C – uncontrolled RH
14 days
Water Immersion
43 ± 2°C , PH 5.5 ± 0.5
7 days
Fiber Side Pull test
0.23 kg load, 90° angle , 2 directions
5 seconds
Fiber Side Pull test
0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs
1X16 Bare PLC Steel Tube 250µm Single Mode Fiber Splitter
1X16 Bare PLC Steel Tube 250µm Single Mode Fiber Splitter from the leading fiber dealer in Nairobi Kenya, buy 1X16 Bare PLC Steel Tube 250µm Single Mode Fiber Splitter and have it delivered.
PLC splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. 1X16 Bare PLC Steel Tube 250µm Single Mode Fiber is a kind of ODN product suitable for PON networks that can be installed in the pigtail cassette, test instrument and WDM system, which minimizes the space occupation.
1X16 Bare PLC Steel Tube 250µm Single Mode Fiber is relatively fragile on fiber protection and need a complete protection design on carrying box body and device.
Name of the test
Condition
Duration
Temperature- Humidity aging
85°C and 85% RH
7 days
Vibration
10 – 55Hz, 1.52mm double amplitude, in three axes
1 hour
Component Impact
Test Impact of 500g (mass ? 0.125kg), 1ms , half sine pulse
2 impacts
Temperature Cycling Test
-40 – 70°C, Ramp rate: 1°C /min, Dwell time > 15min
10 cycles
Temperature- Humidity cycling
-40 – 85°C , between 10°C and 23°C – 85% RH, at 85°C – 20%RH, between °C and 85°C – maintain a linear change in RH, below 10°C – uncontrolled RH
14 days
Water Immersion
43 ± 2°C , PH 5.5 ± 0.5
7 days
Fiber Side Pull test
0.23 kg load, 90° angle , 2 directions
5 seconds
Fiber Side Pull test
0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs
Related products
-
Add to cart12 Core Single-mode Air Blown Duct Micro Fiber Optic Cable, G652D Mtech
The 12 Core Single Mode Air Blown Duct Micro Fiber Optic Cable is a cutting-edge solution designed for high-speed telecommunications and data transmission. With its compact and lightweight design, this cable is ideal for applications requiring minimal space and maximum efficiency, such as Fiber to the Home (FTTH), data centers, and high-density network environments. The cable comprises 12 single-mode fibers, allowing for efficient data transmission over long distances while maintaining signal integrity and quality. Engineered for air-blown installation systems, it enables quick and easy deployment through existing duct networks without the need for extensive construction or disruption.
This fiber optic cable offers excellent performance with low attenuation rates, typically ? 0.35 dB/km at 1310 nm and ? 0.20 dB/km at 1550 nm, ensuring high-quality signal transmission over extended distances. It is constructed with low smoke zero halogen (LSZH) material, making it resistant to fire and emitting minimal smoke and toxic fumes, which enhances safety in emergencies. Designed to operate effectively in a wide temperature range, from -20?C to +70?C, and with storage conditions ranging from -40?C to +70?C, the cable is suitable for diverse environments. Additionally, it features an integrated moisture barrier that protects against water ingress, ensuring reliability and durability even in humid or wet conditions.
In summary, the 12 Core Single Mode Air Blown Duct Micro Fiber Optic Cable is a versatile and reliable solution for modern networking needs. It provides high-speed data transmission and easy installation for various applications, making it an essential choice for telecommunication professionals seeking efficiency and performance.
?
? -
Add to cart2 Core SingleMode Outdoor FTTH Drop Cable
The 2 Core SingleMode Outdoor FTTH Drop Cable (1KM) is specifically designed for high-performance telecommunications and data networking applications, particularly in Fiber-to-the-Home (FTTH) installations. This cable features two singlemode fibers that provide efficient, long-distance data transmission, making it ideal for connecting homes and businesses to fiber optic networks.
Constructed with a robust design, the cable typically includes a loose tube or tight-buffered configuration, offering excellent protection against environmental factors. The outer jacket is made from UV-resistant materials, such as low smoke zero halogen (LSZH) or polyethylene (PE), ensuring durability and resistance to outdoor conditions. It is reinforced with aramid yarn, adding strength and preventing damage during installation or use.
With a length of 1 kilometer (1000 meters), this cable is engineered to facilitate extensive reach while maintaining optimal signal integrity. It operates effectively across a wide temperature range, from -40°C to +70°C, making it suitable for various climates. The design accommodates a minimum bending radius of 10 times the outer diameter, allowing for flexible installation in tight spaces.
Optimized for wavelengths of 1310 nm and 1550 nm, the 2 Core SingleMode Outdoor FTTH Drop Cable ensures low attenuation and high data transmission rates, supporting modern high-speed internet and communication services. Its versatility in connector options (such as SC or LC) enhances compatibility with different network equipment.
-
Add to cart12 Port 1U SC/UPC Duplex MM Adapter Rack mount ODF?
12 Port 1U SC/UPC Duplex MM Adapter Rack mount ODF from the leading fiber dealer in Nairobi kenya, buy online 12 Port 1U SC/UPC Duplex MM Adapter Rack mount ODF and have it delivered at your doorstep.
12 Port 1U SC/UPC Duplex MM Adapter Rack mount ODF is made of metal in 19? standard structure. There are 2pcs of stainless steel rails at the sides of the box. 12 Port 1U SC/UPC Duplex MM Adapter Rack mount ODF can be loaded with FC,SC,ST,LC adapters and pigtails.
The fiber patch panel is where the end of the optical cable is connected, and then connected to the optical switch through an optical jumper. fiber patch panel is usually installed in a 19-inch rack and can accommodate a larger number of fiber optic cable ends.It can be applied in branch connection of optical cable termination.
Features:
Rack mounting 19? standard size, light weight
Suitable for ribbon and single fiber
Various panel plate to fit different adapter interface
24C, 36C, 48C, 96C,144C optional, with or without fiber optic pigtails and adapters
Easy for management and operation
Sprayed surface treatment process
Customizble color and LOGOApplications:
Telecommunications subscriber loop
Fiber to the home (FTTH)
LAN/WAN -
Add to cart1X16 Bare PLC Steel Tube 250µm Single Mode Fiber Splitter
1X16 Bare PLC Steel Tube 250µm Single Mode Fiber Splitter from the leading fiber dealer in Nairobi Kenya, buy 1X16 Bare PLC Steel Tube 250µm Single Mode Fiber Splitter and have it delivered.
PLC splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. 1X16 Bare PLC Steel Tube 250µm Single Mode Fiber is a kind of ODN product suitable for PON networks that can be installed in the pigtail cassette, test instrument and WDM system, which minimizes the space occupation.
1X16 Bare PLC Steel Tube 250µm Single Mode Fiber is relatively fragile on fiber protection and need a complete protection design on carrying box body and device.
Name of the test
Condition
Duration
Temperature- Humidity aging
85°C and 85% RH
7 days
Vibration
10 – 55Hz, 1.52mm double amplitude, in three axes
1 hour
Component Impact
Test Impact of 500g (mass ? 0.125kg), 1ms , half sine pulse
2 impacts
Temperature Cycling Test
-40 – 70°C, Ramp rate: 1°C /min, Dwell time > 15min
10 cycles
Temperature- Humidity cycling
-40 – 85°C , between 10°C and 23°C – 85% RH, at 85°C – 20%RH, between °C and 85°C – maintain a linear change in RH, below 10°C – uncontrolled RH
14 days
Water Immersion
43 ± 2°C , PH 5.5 ± 0.5
7 days
Fiber Side Pull test
0.23 kg load, 90° angle , 2 directions
5 seconds
Fiber Side Pull test
0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs
-
Add to cart12 Core Underground Armoured Singlemode Fibre Optic Cable , G652D?
The 12 Core Underground Armoured Singlemode Fibre Optic Cable is specifically engineered for robust, high-capacity communication in challenging environments. Designed for underground installations, this cable features a durable armoured construction that offers exceptional protection against physical damage, moisture, and environmental hazards, making it ideal for direct burial and outdoor applications.
With 12 singlemode fibers, this cable supports long-distance data transmission, typically achieving distances of up to 40 km or more, depending on network conditions. It operates effectively at standard wavelengths of 1310 nm and 1550 nm, ensuring minimal signal loss and high-speed performance.
The outer jacket is crafted from low smoke zero halogen (LSZH) or PVC material, providing additional safety and reduced toxicity in case of fire. The armouring, made from steel or aluminum tape, adds a layer of mechanical strength, allowing the cable to withstand harsh conditions and potential impacts.
Designed with a minimum bending radius of 20 times its outer diameter, this cable maintains flexibility during installation and ensures reliable performance in various setups. It operates within a temperature range of -40?C to +70?C, ensuring functionality in diverse climates.
The 12 Core Underground Armoured Singlemode Fibre Optic Cable is compliant with international standards (such as IEC and TIA/EIA), reflecting its quality and reliability. This cable is an essential component for telecommunications networks, data centers, and other applications requiring secure, high-speed connectivity in underground settings, providing a future-proof solution for modern communication needs.
?
?