APC 650VA 230V Back-UPS, with Universal Sockets ,BV650I-MSX – Kenya
KSh15,500.00
APC 650VA 230V Back-UPS with Universal Sockets (BV650I-MSX)
APC 650VA 230V Back-UPS with Universal Sockets (BV650I-MSX) Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers. APC 650VA 230V Back-UPS Protect equipment with input transformer blocks without blocking access to other receptacles.
650VA 230V Back-UPS is Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. APC 650VA 230V Back-UPS Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
APC 650VA 230V Back-UPS Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. 650VA 230V Back-UPS Maximizes battery performance, life, and reliability through intelligent, precision charging.
APC 650VA 230V Back-UPS Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. APC 650VA 230V Back-UPS with Universal Sockets Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
APC 650VA 230V Back-UPS Protect equipment with input transformer blocks without blocking access to other receptacles. APC 650VA 230V Back-UPS Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
APC 650VA 230V Back-UPS specifications
Capacity: 650VA/375W
Input voltage: 230V
Output voltage: 230V
Output connections: Universal Outlet x 2
Input connection: IEC-320 C14
Output waveform: Stepped approximation to a sinewave
Transfer time: 6ms typical, 10ms maximum.
Surge energy rating: 273 Joules
Battery type: Sealed, maintenance-free lead-acid
Typical recharge time: 6 hours
Backup runtime: Up to 10 minutes at half load, 3 minutes at full load
Audible noise: Less than 40 dBA at 1 meter distance
Operating temperature: 0°C to 40°C
Dimensions (H x W x D): 161 x 123 x 190 mm
Weight: 4.5 kg
Main
acoustic level
40 dBA
battery curve
A
battery type
Lead-acid battery
curve equation
Efficiency
curve fixed loss
0.0265
curve load maximum
100 %
curve load minimum
3 %
curve proportional loss
0
curve square loss
0.011
curve test cond ID
Curve fit to measured efficiency data. All measurements taken in normal operating mode, at typical environmental conditions, with nominal electrical input and balanced resistive load (PF = 1.0) output.
curve X-axis maximum
100 %
curve X-axis minimum
0 %
curve X-axis title
Load
curve X-axis units
Percentage
curve Y-axis maximum
100 %
curve Y-axis minimum
50 %
curve Y-axis title
Efficiency
curve Y-axis units
Percentage
equipment protection policy
No EPP for ASEAN
extended runtime
0
maximum input current
5 A
Maximum configurable power in VA
650 VA
Maximum configurable power in W
325 W
input protection type
GL fuse
liquid value
0
mounting mode
Not rack-mountable
mounting position
Vertical
mounting preference
No preference
number of battery filled slots
1
number of battery free slots
0
Battery recharge time
4 h
cable length
1.22 m
cos phi
0.5
depth
30 cm
height
14.1 cm
number of cables
1
Number of power module filled slots
0
Number of power module free slots
0
net weight
4.33 kg
rated power in VA
650 VA
rated power in W
325 W
Surge energy rate
160 J
switching current capacity
5 A
Number of tare power
12 W
width
10.1 cm
operating altitude
0…6561 ft
ambient air temperature for operation
0…40 °C
battery life
2…4 year(s)
ambient air temperature for storage
-20…50 °C
storage altitude
0.00…14999.82 m
Transfer time
4 ms typical : 6 ms maximum
UPS size
WS
UPS type
Line interactive
Wave type
Stepped approximation to a sinewave
graph display
2
redundant
No
runtime at 100W
00:17:00
runtime at 200W
00:04:19
runtime at 300W
00:00:11
runtime at 50W
00:41:00
show note OP temperature
No
two post mountable
0
No
colour
Black
full load runtime
00:00:01 325 W
half load runtime
00:07:15 162.5 W
input voltage
230 V
input voltage limits
180…270 V
battery charger power
19 W rated
nb of power socket outlets
2 universal receptacle
network frequency
50/60 Hz +/- 3 Hz auto-sensing
output voltage
230 V
plug standard
NEMA 5-15P
provided equipment
Installation guide
relative humidity
0…95 %
Battery power in VAH
75 VAh runtime
product web sub-family
Entry level
Output
output frequency
50/60 Hz +/- 1 Hz sync to mains
Communications & Management
control panel
LED Status display with on line : on battery
alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Packing Units
Package 1 Weight
4.58 kg
Package 1 Height
22.3 cm
Package 1 width
14.3 cm
Package 1 Length
34.7 cm
SCC14
10731304318184
Number of Units in Package 2
4
Package 2 Weight
18.50 kg
Package 2 Height
228.60 mm
Package 2 width
355.60 mm
Package 2 Length
584.20 mm
Number of Units in Package 3
80
Package 3 Weight
405 kg
Package 3 Height
114 cm
Package 3 width
100 cm
Package 3 Length
120 cm
Pallet unit layers
20
Pallet layers
4
Offer Sustainability
Sustainable offer status
Green Premium product
REACh free of SVHC
Yes
EU RoHS Directive
Compliant EU RoHS Declaration
Mercury free
Yes
RoHS exemption information
Yes
WEEE
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Optimized Energy Efficiency
Energy efficient product
APC 650VA 230V Back-UPS with Universal Sockets (BV650I-MSX)
APC 650VA 230V Back-UPS with Universal Sockets (BV650I-MSX) Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers. APC 650VA 230V Back-UPS Protect equipment with input transformer blocks without blocking access to other receptacles.
650VA 230V Back-UPS is Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. APC 650VA 230V Back-UPS Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
APC 650VA 230V Back-UPS Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. 650VA 230V Back-UPS Maximizes battery performance, life, and reliability through intelligent, precision charging.
APC 650VA 230V Back-UPS Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. APC 650VA 230V Back-UPS with Universal Sockets Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
APC 650VA 230V Back-UPS Protect equipment with input transformer blocks without blocking access to other receptacles. APC 650VA 230V Back-UPS Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
APC 650VA 230V Back-UPS specifications
Capacity: 650VA/375W
Input voltage: 230V
Output voltage: 230V
Output connections: Universal Outlet x 2
Input connection: IEC-320 C14
Output waveform: Stepped approximation to a sinewave
Transfer time: 6ms typical, 10ms maximum.
Surge energy rating: 273 Joules
Battery type: Sealed, maintenance-free lead-acid
Typical recharge time: 6 hours
Backup runtime: Up to 10 minutes at half load, 3 minutes at full load
Audible noise: Less than 40 dBA at 1 meter distance
Operating temperature: 0°C to 40°C
Dimensions (H x W x D): 161 x 123 x 190 mm
Weight: 4.5 kg
Main
acoustic level
40 dBA
battery curve
A
battery type
Lead-acid battery
curve equation
Efficiency
curve fixed loss
0.0265
curve load maximum
100 %
curve load minimum
3 %
curve proportional loss
0
curve square loss
0.011
curve test cond ID
Curve fit to measured efficiency data. All measurements taken in normal operating mode, at typical environmental conditions, with nominal electrical input and balanced resistive load (PF = 1.0) output.
curve X-axis maximum
100 %
curve X-axis minimum
0 %
curve X-axis title
Load
curve X-axis units
Percentage
curve Y-axis maximum
100 %
curve Y-axis minimum
50 %
curve Y-axis title
Efficiency
curve Y-axis units
Percentage
equipment protection policy
No EPP for ASEAN
extended runtime
0
maximum input current
5 A
Maximum configurable power in VA
650 VA
Maximum configurable power in W
325 W
input protection type
GL fuse
liquid value
0
mounting mode
Not rack-mountable
mounting position
Vertical
mounting preference
No preference
number of battery filled slots
1
number of battery free slots
0
Battery recharge time
4 h
cable length
1.22 m
cos phi
0.5
depth
30 cm
height
14.1 cm
number of cables
1
Number of power module filled slots
0
Number of power module free slots
0
net weight
4.33 kg
rated power in VA
650 VA
rated power in W
325 W
Surge energy rate
160 J
switching current capacity
5 A
Number of tare power
12 W
width
10.1 cm
operating altitude
0…6561 ft
ambient air temperature for operation
0…40 °C
battery life
2…4 year(s)
ambient air temperature for storage
-20…50 °C
storage altitude
0.00…14999.82 m
Transfer time
4 ms typical : 6 ms maximum
UPS size
WS
UPS type
Line interactive
Wave type
Stepped approximation to a sinewave
graph display
2
redundant
No
runtime at 100W
00:17:00
runtime at 200W
00:04:19
runtime at 300W
00:00:11
runtime at 50W
00:41:00
show note OP temperature
No
two post mountable
0
No
colour
Black
full load runtime
00:00:01 325 W
half load runtime
00:07:15 162.5 W
input voltage
230 V
input voltage limits
180…270 V
battery charger power
19 W rated
nb of power socket outlets
2 universal receptacle
network frequency
50/60 Hz +/- 3 Hz auto-sensing
output voltage
230 V
plug standard
NEMA 5-15P
provided equipment
Installation guide
relative humidity
0…95 %
Battery power in VAH
75 VAh runtime
product web sub-family
Entry level
Output
output frequency
50/60 Hz +/- 1 Hz sync to mains
Communications & Management
control panel
LED Status display with on line : on battery
alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Packing Units
Package 1 Weight
4.58 kg
Package 1 Height
22.3 cm
Package 1 width
14.3 cm
Package 1 Length
34.7 cm
SCC14
10731304318184
Number of Units in Package 2
4
Package 2 Weight
18.50 kg
Package 2 Height
228.60 mm
Package 2 width
355.60 mm
Package 2 Length
584.20 mm
Number of Units in Package 3
80
Package 3 Weight
405 kg
Package 3 Height
114 cm
Package 3 width
100 cm
Package 3 Length
120 cm
Pallet unit layers
20
Pallet layers
4
Offer Sustainability
Sustainable offer status
Green Premium product
REACh free of SVHC
Yes
EU RoHS Directive
Compliant EU RoHS Declaration
Mercury free
Yes
RoHS exemption information
Yes
WEEE
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Optimized Energy Efficiency
Energy efficient product
Related products
-
Add to cartAPC Back-UPS 1400VA 230V AVR IEC Sockets 700Watts/1.4kVA
APCs Back-UPS 1400 protect your electronic equipment from damage due to power outages, surges and spikes while providing short term battery power during an outage.
The Back-UPS 1400 features Automatic Voltage Regulation (AVR),which instantly adjusts high and low voltage fluctuations to safe levels for your electronics, saving battery power for when you need it most during storms and power outages. Additionally, Australian sockets make for easy-to-use connection of protected equipment.
APC 1400VA UPS Specification
Capacity: 1400VA / 700 Watts
Input Voltage: 230V
Output Voltage: 230V
UPS Topology: Standby
Waveform Type: Stepped approximation to a sinewave
Transfer Time: 4 ms typical
Input Connections: IEC-320 C14
Output Connections: 6 x IEC 320 C13
Battery Type: Sealed lead-acid
Battery Runtime: Varies depending on the load
Recharge Time: 10 hours
Communication Ports: USB
Interface Port: RJ-45 10/100 Base-T Ethernet
Audible Alarms: On Battery, Low Battery, Overload, Replace Battery
Surge Energy Rating: 273 Joules
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Dimensions: 215mm x 130mm x 336mm (8.46? x 5.12? x 13.23?)
Weight: 12.5 kg (27.56 lbs)Conclusion
The APC 1400VA Backup UPS provides reliable backup power and surge protection for your electronic devices. It features Automatic Voltage Regulation (AVR) to stabilize the input voltage and protect your equipment from voltage fluctuations.
The UPS has multiple IEC output sockets to accommodate your devices. With its USB communication port, you can connect the UPS to your computer for monitoring and management.
-
Add to cart2KVA APC Easy UPS SMV 2000VA 230V Universal Outlet, SMV2000AI-MS
2KVA APC Easy UPS SMV 2000VA 230V UPS (SMV2000AI-MS) is built with resilient sheet metal that rigidly holds and protects critical electrical components. 2KVA APC Easy UPS Automatic Voltage Regulation,
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. 2KVA APC Easy UPS SMV 2000VA 230V UPS pure form of sinewave designed to emulate utility power, will support your device upon battery backup.
APC SMV 2000 UPS Specifications
Model: SMV2000AI-MS
Power Capacity: 2000VA / 1400W
Input Voltage: 230V
Output Voltage: 230V
Topology: Line Interactive
Universal Outlet Design: Allows easy connectivity with a variety of devices
Automatic Voltage Regulation (AVR): Provides stable output voltage and protects against voltage fluctuations
Surge Protection: Safeguards connected equipment from power surges and spikes
LCD Display: Provides detailed information and status updates for easy monitoring and management
Hot-Swappable Batteries: Enables uninterrupted operation during battery replacement
Energy Efficient Design: Helps reduce energy consumption and operating costs.
Reliable Power Protection: Ensures the continuity of operations and the safety of valuable equipment and data.
Conclusion
The APC SMV2000AI-MS is a 2KVA Easy UPS designed to provide reliable power protection for your valuable equipment. With a power capacity of 2000VA and 230V input and output voltage, it ensures a stable power supply to keep your devices running smoothly.
The UPS features a line interactive topology, offering efficient power conditioning and voltage regulation to protect against fluctuations and maintain optimal performance. The universal outlet design allows easy connectivity to various devices, making it versatile for different applications. -
Add to cart500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS
500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
APC Easy UPS BV 500VA 230V Allow flexibility for setup in tight locations and mounting on wall or other surfaces. APC Easy UPS BV 500VA 230V battery Back up and protect your hardware and data during power outages, surges and spikes.
500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. BV500I-MSX UPS Maximizes battery performance, life, and reliability through intelligent, precision charging.
BV500I-MSX UPS AVR Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS Specification
Output – Output power capacity 300Watts / 500VA – Max Configurable Power (Watts) 300Watts / 500VA – Nominal Output Voltage 230V – Output Frequency (not synced) 50/60 Hz +/-1 Hz – Topology Line Interactive – Waveform type Stepped approximation to a sinewave – Transfer Time 6ms typical : 10ms maximum
Input – Nominal Input Voltage 230V – Input frequency 50/60 Hz +/- 5 Hz (auto sensing) – Input Connections IEC-320 C14 – Cord Length 1.52meters – Number of Power Cords 1 – Batteries & Runtime – Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof – Expected Battery Life (years) 3 – 5 – Efficiency View Efficiency Graph (Available in Technical Tab on site)
Communications & Management – Control panel LED Status display with On Line : On Battery – Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm – Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. – Product link: APC-EASY-UPS-BV-500VA-AVR-Universal-Outlet-230V/P-BV500I-MS Page 1 of 2
Technical Specifications – APC EASY UPS BV 500VA, AVR, Universal Outlet, 230V | BV500I-MS | Downloaded on 05/30/2019 (EST) Physical – Maximum Height 92MM, 9.25CM – Maximum Width 160MM, 16.05CM – Maximum Depth 305MM, 30.5CM – Net Weight 3.9KG – Shipping weight 4.2KG – Shipping Height 237MM, 23.7CM – Shipping Width 143MM, 14.3CM – Shipping Depth 373MM, 37.3CM – SCC Codes 1073130433829 8
Environmental – Operating Temperature 0 – 40 °C – Operating Relative Humidity 0 – 90 % – Operating Elevation 0-1968.3meters – Audible noise at 1 meter from surface of unit
APC 500VA Specifications
Capacity: 500VA/300W
Input voltage: 230V
Output voltage: 230V
Output connections: Universal Outlet x 2
Input connection: IEC-320 C14
Output waveform: Stepped approximation to a sinewave
Transfer time: 6ms typical, 10ms maximum
Surge energy rating: 273 Joules
Battery type: Sealed, maintenance-free lead-acid
Typical recharge time: 6 hours
Backup runtime: Up to 10 minutes at half load, 3 minutes at full load
Audible noise: Less than 40 dBA at 1 meter distance
Operating temperature: 0°C to 40°C.
Dimensions (H x W x D): 161 x 123 x 190 mm
Weight: 4.3 kg -
Add to cart650VA Easy UPS-battery backup UPS BVS6501
650VA Easy UPS-battery backup UPS BVS6501 from the leading UPS dealer in Nairobi kenya, buy online Schneider 650VA Easy UPS-battery backup UPS BVS6501 and have it delivered at your doorstep.
Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Easy UPS Features & Benefits
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Audible alarms –Provides notification of changing utility power and UPS power conditions
LED Indicators Provide easy-to-read status of the unit and utility power conditions.
Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable Provides temporary battery power when the utility power is out.
Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
APC 650VA Specifications
Capacity: 650VA/360W
Input voltage: 230V
Output voltage: 230V
Output connections: 3x IEC 320 C13
Input connection: IEC-320 C14
Output waveform: Stepped approximation to a sinewave
Transfer time: 6ms typical, 10ms maximum
Surge energy rating: 273 Joules
Battery type: Sealed, maintenance-free lead-acid
Typical recharge time: 6 hours
Backup runtime: Up to 12 minutes at half load, 3 minutes at full load
Audible noise: Less than 45 dBA at 1 meter distance
Operating temperature: 0°C to 40°C
Dimensions (H x W x D): 161 x 123 x 190 mm
Weight: 4.9 kgConclusion
The APC 650VA Easy UPS (BVS6501) is a compact and reliable battery backup UPS designed to provide backup power during outages and protect connected equipment from power disturbances. With a capacity of 650VA and 360W, it offers sufficient power to support critical devices such as computers, routers, and small electronics. The UPS features three IEC 320 C13 output connections, allowing you to connect multiple devices simultaneously.
Overview
Lead time
Usually in Stock
General
provided equipment
User manual
Number of power module free slots
0
Number of power module filled slots
0
redundant
No
UPS size
WS
Physical
cable length
1.50 m
colour
Black
depth
30.5 cm
height
9.25 cm
mounting preference
No preference
net weight
4.5 kg
mounting mode
Not rack-mountable
two post mountable
0
USB compatible
No
width
16.5 cm
Input
network frequency
50/60 Hz +/- 5 Hz auto-sensing
plug standard
BS1363A British
input voltage limits
170…280 V
number of cables
1
input voltage
230 V
Output
rated power in W
375 W
Maximum configurable power in W
375 W
output frequency
50/60 Hz +/- 1 Hz unsynchronised
UPS type
Line interactive
Wave type
Stepped approximation to a sinewave
nb of power socket outlets
4 universal receptacle
curve equation
Efficiency
curve fixed loss
0.0294
curve load maximum
100 %
curve load minimum
3 %
curve proportional loss
0
curve square loss
0.0021
curve X-axis maximum
100 %
curve test cond ID
Curve fit of data measured in accordance with the ENERGY STAR Test Method for Uninterruptible Power Supplies. All measurements taken in normal mode(s), at typical environmental conditions, with 230V/50Hz electrical input and balanced resistive load (PF = 1.0) output.
curve X-axis minimum
0 %
curve X-axis title
Load
curve X-axis units
Percentage
curve Y-axis maximum
100 %
curve Y-axis minimum
50 %
curve Y-axis title
Efficiency
curve Y-axis units
Percentage
graph display
1
output voltage
230 V
Maximum configurable power in VA
650 VA
rated power in VA
650 VA
Transfer time
6 ms typical : 10 ms maximum
Conformance
product certifications
CE -
Add to cart
APC Back-UPS 1400VA 230V AVR IEC Sockets 700Watts/1.4kVA
APCs Back-UPS 1400 protect your electronic equipment from damage due to power outages, surges and spikes while providing short term battery power during an outage.
The Back-UPS 1400 features Automatic Voltage Regulation (AVR),which instantly adjusts high and low voltage fluctuations to safe levels for your electronics, saving battery power for when you need it most during storms and power outages. Additionally, Australian sockets make for easy-to-use connection of protected equipment.
APC 1400VA UPS Specification
Capacity: 1400VA / 700 Watts
Input Voltage: 230V
Output Voltage: 230V
UPS Topology: Standby
Waveform Type: Stepped approximation to a sinewave
Transfer Time: 4 ms typical
Input Connections: IEC-320 C14
Output Connections: 6 x IEC 320 C13
Battery Type: Sealed lead-acid
Battery Runtime: Varies depending on the load
Recharge Time: 10 hours
Communication Ports: USB
Interface Port: RJ-45 10/100 Base-T Ethernet
Audible Alarms: On Battery, Low Battery, Overload, Replace Battery
Surge Energy Rating: 273 Joules
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Dimensions: 215mm x 130mm x 336mm (8.46? x 5.12? x 13.23?)
Weight: 12.5 kg (27.56 lbs)Conclusion
The APC 1400VA Backup UPS provides reliable backup power and surge protection for your electronic devices. It features Automatic Voltage Regulation (AVR) to stabilize the input voltage and protect your equipment from voltage fluctuations.
The UPS has multiple IEC output sockets to accommodate your devices. With its USB communication port, you can connect the UPS to your computer for monitoring and management.