APC EASY UPS SRV1KRI 1000VA ON-LINE SRV 230V, SRV1KRI – Kenya
KSh150,000.00
APC EASY UPS SRV1KRI 1000VA ON-LINE SRV 230V, SRV1KRI
The APC EASY UPS SRV1KRI is a reliable and efficient UPS solution designed to provide continuous power protection for critical equipment and systems. With a power capacity of 1000VA, it offers ample power to support a variety of devices, ensuring uninterrupted operation during power outages or voltage fluctuations.
The UPS operates in an online double-conversion mode, which provides clean and stable power output, protecting connected equipment from power disturbances and fluctuations.
It features an intuitive LCD display that allows for easy monitoring of UPS status and provides important information such as input/output voltage, load capacity, and battery status.
Brand Name: APC Easy UPS
Output:
Max Configurable Power (Watts): 800Watts / 1.0kVA
Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
Efficiency at Full Load: 88.0 %
Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
Other Output Voltages: 220, 240
Load Crest Factor: 3 : 1
Topology: Double Conversion Online
Waveform type: Sine wave
Bypass: Internal Bypass (Automatic and Manual)
Input:
Input frequency: 40 – 70 Hz
Input voltage range for main operations: 160 – 280V
Input voltage adjustable range for mains operation: 110 – 285 (half load)V
Number of Power Cords: 1
Efficiency at Full Load: 88.0 %
Other Input Voltages: 220, 240
Batteries & Runtime:
Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 4hour(s)
Battery Charge Power (Watts): 38Watts
Battery Volt-Amp-Hour Capacity: 152
Runtime: View Runtime Graph, View Runtime Chart
Efficiency: View Efficiency Graph
Communications & Management:
Control panel: Multi-function LCD status and control console
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency Power Off (EPO): —
Available SmartSlot™ Interface Quantity: 1
Surge Protection and Filtering:
Surge energy rating: 600Joules
Physical:
Maximum Height: 86MM, 8.6CM
Maximum Width: 437MM, 43.7CM
Maximum Depth: 312MM, 31.2CM
Net Weight: 11.0KG
Shipping weight: 13.1KG
Shipping Height: 218MM, 21.8CM
Shipping Width: 455MM, 45.5CM
Shipping Depth: 551MM, 55.1CM
Color: Black
Environmental
Operating Temperature: 0 – 40 °C
Operating Relative Humidity: 0 – 95 (non-condensing) %
Operating Elevation: 0-3000meters
Storage Temperature: -20 – 50 °C
Storage Relative Humidity: 0 – 95 (non-condensing) %
Storage Elevation: 0-15000meters
Audible noise at 1 meter from surface of unit: 50.0dBA
Protection Class: IP 20
Conformance
Approvals: CE, IEC 62040-1-1, IEC 62040-1-2
Warranty: 2 years repair or replace
APC EASY UPS SRV1KRI 1000VA ON-LINE SRV 230V, SRV1KRI
The APC EASY UPS SRV1KRI is a reliable and efficient UPS solution designed to provide continuous power protection for critical equipment and systems. With a power capacity of 1000VA, it offers ample power to support a variety of devices, ensuring uninterrupted operation during power outages or voltage fluctuations.
The UPS operates in an online double-conversion mode, which provides clean and stable power output, protecting connected equipment from power disturbances and fluctuations.
It features an intuitive LCD display that allows for easy monitoring of UPS status and provides important information such as input/output voltage, load capacity, and battery status.
Brand Name: APC Easy UPS
Output:
Max Configurable Power (Watts): 800Watts / 1.0kVA
Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
Efficiency at Full Load: 88.0 %
Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
Other Output Voltages: 220, 240
Load Crest Factor: 3 : 1
Topology: Double Conversion Online
Waveform type: Sine wave
Bypass: Internal Bypass (Automatic and Manual)
Input:
Input frequency: 40 – 70 Hz
Input voltage range for main operations: 160 – 280V
Input voltage adjustable range for mains operation: 110 – 285 (half load)V
Number of Power Cords: 1
Efficiency at Full Load: 88.0 %
Other Input Voltages: 220, 240
Batteries & Runtime:
Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 4hour(s)
Battery Charge Power (Watts): 38Watts
Battery Volt-Amp-Hour Capacity: 152
Runtime: View Runtime Graph, View Runtime Chart
Efficiency: View Efficiency Graph
Communications & Management:
Control panel: Multi-function LCD status and control console
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency Power Off (EPO): —
Available SmartSlot™ Interface Quantity: 1
Surge Protection and Filtering:
Surge energy rating: 600Joules
Physical:
Maximum Height: 86MM, 8.6CM
Maximum Width: 437MM, 43.7CM
Maximum Depth: 312MM, 31.2CM
Net Weight: 11.0KG
Shipping weight: 13.1KG
Shipping Height: 218MM, 21.8CM
Shipping Width: 455MM, 45.5CM
Shipping Depth: 551MM, 55.1CM
Color: Black
Environmental
Operating Temperature: 0 – 40 °C
Operating Relative Humidity: 0 – 95 (non-condensing) %
Operating Elevation: 0-3000meters
Storage Temperature: -20 – 50 °C
Storage Relative Humidity: 0 – 95 (non-condensing) %
Storage Elevation: 0-15000meters
Audible noise at 1 meter from surface of unit: 50.0dBA
Protection Class: IP 20
Conformance
Approvals: CE, IEC 62040-1-1, IEC 62040-1-2
Warranty: 2 years repair or replace
Related products
-
APC 3kVA/2400W Easy On-Line TowerUPS , SRV3KIL – Kenya
KSh230,000.00Add to cartAPC 3kVA/2400W Easy On-Line TowerUPS , SRV3KIL
APC Easy UPS On-Line, 3kVA/2400W, Tower, 230V, 6x IEC C13 + 1x IEC C19 outlets, Intelligent Card Slot, LCD, Extended runtime
High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.
SRV3KIL Specifications
Model: APC Easy On-Line Tower UPS SRV3KIL
Power Capacity: 3kVA / 2400W
Input Voltage: 230V
Output Voltage: 230V
On-Line Double-Conversion Technology
Battery Type: Sealed Lead-Acid
Battery Quantity: Internal battery
Typical Recharge Time: 3 hours
Transfer Time: 0 ms (no transfer time to battery)
Communication Ports: USB, SmartSlot
Operating Temperature: 0°C to 40°C
Audible Alarm
LED Status Indicators
Surge Protection
Automatic Voltage Regulation (AVR)
Energy Efficiency: Up to 95%
Dimensions (H x W x D): 345 x 192 x 460 mm
Weight: 27.5 kg
Automatic internal bypass
Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Intelligent Card Slot
Customize UPS capabilities with management cards.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Easy UPS On-Line Features & Benefits
Features
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.
Double conversion on-line topology
Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.
Management Software
Management Software
Allows you to easily monitor your utility power and manage your UPS.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
High efficiency
High efficiency rates that remain stable even at lower operating power levels
ManageabilitySerial connectivity
Provides management of the UPS via a serial port.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Intelligent Card Slot
Customize UPS capabilities with management cards.
AvailabilityIntelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
ServiceabilityPredictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Audible alarms
Provides notification of changing utility power and UPS power conditions
-
Add to cartAPC 2kva Easy UPS On-Line, 2000VA/1600W, Rackmount 2U, 230V, 4x IEC C13 outlets, Intelligent Card Slot, LCD, W/O rail kit, SRV2KRI
This APC Single phase Easy UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 2000VA double-conversion on-line 2U rackmount UPS provides pure sine wave power to support critical electronics during power disruptions.
The SRV comes with IEC 320 C14 input and 4x IEC 320 C13 outlets. The On-Line UPS has a intelligent card slot for optional Network Management Card (AP9544, SRVSMB001, VGL9601l) that enables network-based UPS monitoring and management. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. The Built-in automatic and manual bypass provide seamless power to the load even in the event of an internal detected fault or error in UPS.
The SRV UPS is compatible with replacement battery cartridge APCRBCV201. The UPS is compatible with SRVRK1 rail kit sold separately. The UPS and the built-in lead-acid battery has a 2-year warranty. Ideal for small data centers, manufacturing facilities, computer rooms, network storage devices, telecommunication, and healthcare IT.
ACP 2000KVA Rackmount UPS Specifications
Model: SRV2KRI
Capacity: 2000VA/1600W
Topology: On-Line double-conversion
Input Voltage: 230V
Output Voltage: 230V
Form Factor: Rackmount 2U
Outlets: 4x IEC C13
Battery Type: Sealed lead-acid
Typical Recharge Time: 3 hours.
Communication Ports: Intelligent Card Slot, USB
Surge Protection: Yes
Automatic Voltage Regulation (AVR): Yes
Efficiency: Up to 94%
LCD Display: Yes
Audible Alarm: Yes
Dimensions (H x W x D): 86.5mm x 432mm x 500mm
Weight: 26.5kg
Warranty: 2 years -
Add to cartAPC 1KVA On-Line Easy UPS, SRV 1000VA 230V, SRV1KI
The APC EASY UPS SRV1KRI is a reliable and efficient UPS solution designed to provide continuous power protection for critical equipment and systems. With a power capacity of 1000VA, it offers ample power to support a variety of devices, ensuring uninterrupted operation during power outages or voltage fluctuations.
The UPS operates in an online double-conversion mode, which provides clean and stable power output, protecting connected equipment from power disturbances and fluctuations. It features an intuitive LCD display that allows for easy monitoring of UPS status and provides important information such as input/output voltage, load capacity, and battery status.
APC EASY UPS SRV1KRI specifications
Model: APC EASY UPS SRV1KRI
Power Capacity: 1000VA / 1000W
Input Voltage: 230V
Output Voltage: 230V
On-Line Double-Conversion Technology
Battery Type: Sealed Lead-Acid
Battery Quantity: 2 internal batteries
Typical Recharge Time: 3 hours
Transfer Time: 0 ms (no transfer time to battery)
Communication Ports: USB, SmartSlot
Operating Temperature: 0°C to 40°C
Audible Alarm
LED Status Indicators
Surge Protection
Automatic Voltage Regulation (AVR)
Energy Efficiency: Up to 93%
Dimensions (H x W x D): 219 x 171 x 439 mm
Weight: 15.3 kg -
APC 3kVA/2400W Easy On-Line TowerUPS , SRV3KIL – Kenya
KSh230,000.00Add to cartAPC 3kVA/2400W Easy On-Line TowerUPS , SRV3KIL
APC Easy UPS On-Line, 3kVA/2400W, Tower, 230V, 6x IEC C13 + 1x IEC C19 outlets, Intelligent Card Slot, LCD, Extended runtime
High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.
SRV3KIL Specifications
Model: APC Easy On-Line Tower UPS SRV3KIL
Power Capacity: 3kVA / 2400W
Input Voltage: 230V
Output Voltage: 230V
On-Line Double-Conversion Technology
Battery Type: Sealed Lead-Acid
Battery Quantity: Internal battery
Typical Recharge Time: 3 hours
Transfer Time: 0 ms (no transfer time to battery)
Communication Ports: USB, SmartSlot
Operating Temperature: 0°C to 40°C
Audible Alarm
LED Status Indicators
Surge Protection
Automatic Voltage Regulation (AVR)
Energy Efficiency: Up to 95%
Dimensions (H x W x D): 345 x 192 x 460 mm
Weight: 27.5 kg
Automatic internal bypass
Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Intelligent Card Slot
Customize UPS capabilities with management cards.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Easy UPS On-Line Features & Benefits
Features
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.
Double conversion on-line topology
Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.
Management Software
Management Software
Allows you to easily monitor your utility power and manage your UPS.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
High efficiency
High efficiency rates that remain stable even at lower operating power levels
ManageabilitySerial connectivity
Provides management of the UPS via a serial port.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Intelligent Card Slot
Customize UPS capabilities with management cards.
AvailabilityIntelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
ServiceabilityPredictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Audible alarms
Provides notification of changing utility power and UPS power conditions
-
Add to cart
APC 2kva Easy UPS On-Line, 2000VA/1600W, Rackmount 2U, 230V, 4x IEC C13 outlets, Intelligent Card Slot, LCD, W/O rail kit, SRV2KRI
This APC Single phase Easy UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 2000VA double-conversion on-line 2U rackmount UPS provides pure sine wave power to support critical electronics during power disruptions.
The SRV comes with IEC 320 C14 input and 4x IEC 320 C13 outlets. The On-Line UPS has a intelligent card slot for optional Network Management Card (AP9544, SRVSMB001, VGL9601l) that enables network-based UPS monitoring and management. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. The Built-in automatic and manual bypass provide seamless power to the load even in the event of an internal detected fault or error in UPS.
The SRV UPS is compatible with replacement battery cartridge APCRBCV201. The UPS is compatible with SRVRK1 rail kit sold separately. The UPS and the built-in lead-acid battery has a 2-year warranty. Ideal for small data centers, manufacturing facilities, computer rooms, network storage devices, telecommunication, and healthcare IT.
ACP 2000KVA Rackmount UPS Specifications
Model: SRV2KRI
Capacity: 2000VA/1600W
Topology: On-Line double-conversion
Input Voltage: 230V
Output Voltage: 230V
Form Factor: Rackmount 2U
Outlets: 4x IEC C13
Battery Type: Sealed lead-acid
Typical Recharge Time: 3 hours.
Communication Ports: Intelligent Card Slot, USB
Surge Protection: Yes
Automatic Voltage Regulation (AVR): Yes
Efficiency: Up to 94%
LCD Display: Yes
Audible Alarm: Yes
Dimensions (H x W x D): 86.5mm x 432mm x 500mm
Weight: 26.5kg
Warranty: 2 years