APC Smart-UPS C 1500VA LCD RM 230V SMC1500I-2U – Kenya

Related products

• 

  APC Easy UPS SMV 3000VA Universal Outlet 230V UPS – Kenya

  KSh180,000.00

  APC Easy UPS SMV 3000VA Universal Outlet 230V UPS Mtech

  SMV3000AI-MS APC Easy UPS SMV 3000VA, Universal Outlet, 230V Configurable Power upto 2.1 kWatts Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

   

  APC Easy UPS SMV 3000VA Universal Outlet 230V UPS  Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

   

  APC Easy UPS SMV 3000VA Universal Outlet 230V UPS  LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms. SMV3000AI-MS APC Easy UPS SMV 3000VA Cold-start capable provides temporary battery power when the utility power is out.

   

  APC Easy UPS SMV 3000VA UPS Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

   

  APC Easy UPS SMV 3000VA UPS Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance

  SMV3000AI-MS APC Easy UPS specifications

  Output Max Configurable Power (Watts) 2.1kWatts / 3.0kVA

  Output Frequency (not synced) 50/60 Hz +/-1 Hz

  Load Crest Factor 3:1 Topology Line Interactive

  Waveform type Sine wave Transfer Time 2ms typical   Input

  Input frequency 45 – 65 Hz (auto sensing)

  Input voltage range for main operations 157 – 303V

  Number of Power Cords 1 Other Input Voltages 220, 240   Batteries & Runtime

  Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leak-proof

  Typical recharge time 4hour(s)

  Expected Battery Life (years) 3 – 5

  Battery Volt-Amp-Hour Capacity 395   Communications & Management

  Interface Port(s) USB

  Audible Alarm Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm   Physical

  Maximum Height 240MM, 24.0CM

  Maximum Width 180MM, 18.0CM

  Maximum Depth 455MM, 45.5CM

  Net Weight 25.2KG

  Shipping weight 28.9KG

  Shipping Height 410MM, 41.05CM

  Shipping Width 326MM, 32.6CM

  Shipping Depth 601MM, 60.1CM   Environmental

  Operating Temperature 0 – 40 °C

  Operating Relative Humidity 0 – 95 (non-condensing) %

  Operating Elevation 0-3000meters

  Storage Temperature -10 – 40 °C

  Storage Relative Humidity 0 – 95 %

  Storage Elevation 0-3000meters

  Audible noise at 1 meter from surface of unit 45.0dBA   Conformance

  Approvals CE Standard warranty 2 years repair or replace

  Add to cart

  Quick View
• 

  APC Easy UPS 500VA 230V BV500VA UPS – Kenya

  KSh9,900.00

  500VA APC Easy UPS 230V BV 500VA UPS 

  500VA APC Easy UPS 230V BV 500VA UPS Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. APC Easy UPS 230V BV 500VA UPS  with Battery Backup & Surge Protection for Electronics and Computers.

  APC Easy UPS 230V BV 500VA UPS Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. APC Easy UPS 230V BV 500VA UPS will have US plug at one end and IEC at the other end.

  You can use the IEC part of the cable to connect to your PC and the other US plug to connect to the UPS universal socket. APC Easy UPS BV Series comes with US plug. Are you using it to connect to your PC? If yes, you may swap the power input cable of your PC with the input cable of the UPS. BV 500VA UPS  LED Indicators :

  Provide easy-to-read status of the unit and utility power conditions.

  BV 500VA UPS specifications
  Power
  Output power capacity   500  VA
  Output power   300  W
  Input operation voltage (min)   170  V
  Input operation voltage (max)   280  V
  Output frequency regulation 50/60  Hz
  Ports & interfaces
  AC outlets quantity   1
  AC outlet types   C13 coupler
  Cable length   1.52  m
  Battery
  Battery type   leakproof
  Battery life (max) 5  year(s)
  Design
  Colour of product   Black
  Performance
  UPS topology Line-Interactive
  Waveform Sine
  Noise level   40  dB
  Audible alarm(s)   Yes
  Audible alarm modes Alarm when on battery,Low battery alarm,Overload alarm
   
  Input connections IEC–320 C14
  Output voltage 230  V
  Operational conditions
  Operating temperature (T-T)   0 – 40  °C
  Operating relative humidity (H-H) 0 – 90  %
  Certificates
  Certification CE
  RoHS compliance   Yes
  Weight & dimensions
  Width   160  mm
  Depth   305  mm
  Height   92  mm
  Weight   3900  g
  Package width   143  mm
  Package depth   373  mm
  Package height   237  mm
  Package weight   4200  g
  Packaging content
  Manual Yes

  Add to cart

  Quick View
• 

  APC 2kva Smart-UPS, 2000VA , LCD 230V, SMC2000I – Kenya

  KSh184,000.00

  APC Smart-UPS C 2000VA 2kva LCD 230V SMC2000I

  APC Smart-UPS C 2000VA 2kva LCD 230V SMC2000I Provides temporary battery power when the utility power is out. Green moderated-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

  2kVA APC Smart-UPS High online efficiency reduces utility costs, generates less heat.LCD Status display provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.Pure sine wave

  2000 VA APC smart UPS intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

  APC Smart-UPS C 2000VA 2kva specifications
  MODEL NAME
  APC Smart-UPS C 2000VA LCD RM 2U 230V

  INCLUDES
  CD with software

  STANDARD LEAD TIME
  Usually Ships within 2 Weeks

  PRODUCT DISTRIBUTION
  Afghanistan

  Output
  OUTPUT POWER CAPACITY
  1300 Watts / 2000 VA

  MAX CONFIGURABLE POWER (WATTS)
  1300 Watts / 2000 VA

  NOMINAL OUTPUT VOLTAGE
  230V

  OUTPUT VOLTAGE DISTORTION
  Less than 5%

  OUTPUT FREQUENCY (SYNC TO MAINS)
  50 Hz

  Line Interactive

  WAVEFORM TYPE
  Sine wave

  OUTPUT CONNECTIONS
  (2) IEC Jumpers (Battery Backup)

  Input
  NOMINAL INPUT VOLTAGE
  230V

  INPUT FREQUENCY
  50/60 Hz +/- 3 Hz (auto sensing)

  INPUT CONNECTIONS
  IEC-320 C20

  INPUT VOLTAGE RANGE FOR MAIN OPERATIONS
  180 – 287 V

  Batteries & Runtime
  BATTERY TYPE
  Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

  TYPICAL RECHARGE TIME
  3 hour(s)

  REPLACEMENT BATTERY
  APCRBC133

  RBC QUANTITY
  1

  Communications & Management
  INTERFACE PORT(S)
  USB

  CONTROL PANEL
  Multi-function LCD status and control console

  AUDIBLE ALARM
  Alarm when on battery : distinctive low battery alarm : configurable delays

  EMERGENCY POWER OFF (EPO)
  —

  Surge Protection and Filtering
  SURGE ENERGY RATING
  300 Joules

  FILTERING
  Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

  Physical
  MAXIMUM HEIGHT
  89.0 mm

  MAXIMUM WIDTH
  480.0 mm

  MAXIMUM DEPTH
  470.0 mm

  RACK HEIGHT
  2 U

  NET WEIGHT
  26.2 kg

  SHIPPING WEIGHT
  30.16 kg

  SHIPPING HEIGHT
  250.0 mm

  SHIPPING WIDTH
  590.0 mm

  SHIPPING DEPTH
  600.0 mm

  COLOR
  Black

  UNITS PER PALLET
  16.0

  Environmental
  OPERATING ENVIRONMENT
  0 – 40 °C

  OPERATING RELATIVE HUMIDITY
  0 – 95 %

  OPERATING ELEVATION
  0-3000 meters

  STORAGE TEMPERATURE
  -15 – 45 °C

  STORAGE RELATIVE HUMIDITY
  0 – 95 %

  STORAGE ELEVATION
  0-15000 meters

  AUDIBLE NOISE AT 1 METER FROM SURFACE OF UNIT
  42.000 dB

  ONLINE THERMAL DISSIPATION
  81.000 BTU/hr

  Conformance
  APPROVALS
  C-tick

  STANDARD WARRANTY
  2 years repair or replace

  EQUIPMENT PROTECTION POLICY
  Lifetime : $150000

  Sustainable Offer Status
  ROHS
  Compliant

  REACH
  REACH: Contains No SVHCs

  Add to cart

  Quick View
• 

  APC 1.5kva Smart-UPS, 1500VA LCD 230V, SMC1500I UPS – Kenya

  KSh125,000.00

  1.5kva APC Smart-UPS C 1500VA LCD 230V SMC1500I UPS 

  1.5kva APC Smart-UPS C 1500VA LCD 230V SMC1500I UPS from the leading APC UPS authorized dealer in Nairobi Kenya, buy APC UPS at best price.

  Output power capacity

  900Watts / 1.5kVA
  Output Connections

  (8) IEC 320 C13 (Battery Backup)
  (2) IEC Jumpers (Battery Backup)
  Nominal Output Voltage

  230V
  Nominal Input Voltage

  230V
  Input Connections

  IEC-320 C14
  APC Smart-UPS C 1500VA LCD 230V
  Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
  Includes: CD with software, Documentation CD, USB cable
   
  Cold-start capable
  Provides temporary battery power when the utility power is out.
  Green mode
  Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  High online efficiency
  Reduces utility costs, generates less heat.
  LCD Status Display
  Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  Pure sine wave output on battery
  Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
  Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
  Smart-UPS Features & Benefits
  Manageability
  LED status indicators

  Quickly understand unit and power status with visual indicators.
  USB connectivity

  Provides management of the UPS via a USB port (not available on all models).
  Serial connectivity

  Provides management of the UPS via a serial port.
  Network manageable

  Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
  Audible alarms

  Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
  Disconnected battery notification

  Warns when a battery is not available to provide backup power.
  Availability
  Intelligent battery management

  Maximizes battery performance, life, and reliability through intelligent, precision charging.
  Power conditioning

  Protects connected loads from surges, spikes, lightning, and other power disturbances.
  Temperature-compensated battery charging

  Prolongs battery life by regulating the charge voltage according to battery temperature.
  Automatic restart of loads after UPS shutdown

  Automatically starts up the connected equipment upon the return of utility power.
  Automatic self-test

  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  Disconnected battery notification

  Warns when a battery is not available to provide backup power.
  Boost and Trim Automatic Voltage Regulation (AVR)

  Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
  Adaptability
  Adjustable voltage sensitivity

  Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  Adjustable voltage-transfer points

  Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  Serviceability
  Battery failure notification

  Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  Resettable circuit breakers

  Enables a quick recovery from overload events.
  Predictive failure notification.

  Provides early-warning fault analysis ensuring proactive component replacement.
  Hot-swappable batteries

  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  User-replaceable batteries

  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  Marketing features
  Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery management

  Patented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Designed and manufactured by APC for over 23 years, Smart-UPS is the world’s most trusted network UPS with over 25 million units sold.
  Avoids costly power problems by keeping your IT equipment and data safe and available

  Network grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems
  Smarter productivity  with ability to tailor to your specific application needs

  Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.
  Save time with easy and convenient remote accessibility

  Network manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities.
  Peace of mind that comes with full equipment compatibility and reliability of a leader

  Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
  Safety
  Safety-agency approved

  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

  Add to cart

  Quick View
• 

  2kVA APC Smart-UPS, 2000VA, LCD 230V, SMC2000I-2U UPS – Kenya

  KSh175,000.00

  2kVA APC Smart-UPS C 2000VA LCD 230V SMC2000I-2U UPS

  2kVA APC Smart-UPS C 2000VA LCD 230V SMC2000I-2U UPS maximum output capacity of 1300 watts is ideal UPS for top efficiency power back. APC by Schneider Electric is reputed for outstanding quality and great performance. APC Smart-UPS is the UPS of choice, trusted for best backup performance and dependable equipment protection.

  for load below 1300 watts, the APC Smart-UPS C 2000VA (SMC2000I) is what you need. APC Smart-UPS C 2000VA has excellent features to protect your equipment and deliver the power backup you require. With its boost and trim Automatic Voltage Regulation (AVR) function, your equipment gets extended power supply (lower voltage is regulated to supply your equipment).

  APC Smart-UPS C 2000VA (SMC2000I) ensures higher application availability by correcting low and high voltage conditions without using the battery. SMC2000I-2U UPS there is the power conditioning function of this APC UPS. With power conditioning, the UPS protects connected loads from surges, spikes, lightning, and other power disturbances.

  SMC2000I-2U UPS gives notification you need for low battery status with the distinctive low battery alarm of the APC Smart-UPS C 2000VA. Best of all, APC Smart-UPS C 2000VA (SMC2000I) intelligent battery management system will help give your battery the extended battery life APC promises.

  This product has a battery life expectancy of 3 – 5 years, all things being equal. APC Smart-UPS C 2000VA (SMC2000I) a multifunction LCD status and control console. View LCD displays that report the status of the equipment to help you get the best out of your UPS.

  APC Smart-UPS C 2000VA (SMC2000I) specifications
  Main
  acoustic level
  42 dBA

  battery curve
  A

  battery type
  Lead-acid battery

  product certifications
  C-Tick CE EAC GOST IRAM SABS VDE

  curve equation
  Efficiency

  curve load maximum
  100 %

  curve X-axis maximum
  100 %

  curve X-axis minimum
  0 %

  curve X-axis title
  Load

  curve X-axis units
  Percentage

  curve Y-axis maximum
  100 %

  curve Y-axis minimum
  50 %

  curve Y-axis title
  Efficiency

  curve Y-axis units
  Percentage

  equipment protection policy
  Lifetime : $150000

  extended runtime
  0

  Maximum configurable power in VA
  2000 VA

  Maximum configurable power in W
  1300 W

  liquid value
  0

  marking
  GS Mark

  mounting location
  Front

  mounting mode
  Rack-mounted

  mounting preference
  Lower

  number of battery filled slots
  0

  number of battery free slots
  0

  Battery recharge time
  3 h

  number of battery replacement quantity
  1

  depth
  47 cm

  free slots
  0

  height
  8.9 cm

  number of cables
  1

  performance multiplier
  1

  Number of power module filled slots
  0

  Number of power module free slots
  0

  net weight
  26.2 kg

  rated power in VA
  2000 VA

  rated power in W
  1300 W

  Surge energy rate
  300 J

  Number of tare power
  26 W

  width
  48 cm

  noise suppression
  Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

  number of rack unit
  2U

  operating altitude
  0…10000 ft

  ambient air temperature for operation
  0…40 °C

  battery life
  3…5 year(s)

  ambient air temperature for storage
  -15…45 °C

  storage altitude
  0.00…15240.00 m

  Transfer time
  8 ms typical : 10 ms maximum

  size UPS version
  Internetworking Server Telecom

  UPS size
  S

  UPS type
  Line interactive

  Wave type
  Sine wave

  graph display
  1

  redundant
  No

  show note OP temperature
  No

  two post mountable
  1

  Yes

  colour
  Black

  input voltage limits
  180…287 V

  input voltage
  230 V

  battery charger power
  144 W rated

  nb of power socket outlets
  6 IEC 320 C13 2 IEC Jumpers

  network frequency
  50/60 Hz +/- 3 Hz auto-sensing

  output voltage
  230 V

  plug standard
  IEC 320 C20

  provided equipment
  CD with software Documentation CD Installation guide Rack mounting brackets USB cable

  relative humidity
  0…95 %

  Battery power in VAH
  432 VAh runtime

  product web sub-family
  Entry level

  value multiplier
  1

  harmonic distortion
  Less than 5 %

  Environment
  heat dissipation
  81 Btu/h

  Output
  output frequency
  50 Hz sync to mains

  Communications & Management
  control panel
  Multifunction LCD status and control console

  alarm
  Alarm when on battery : distinctive low battery alarm : configurable delays

  Packing Units
  Package 1 Weight
  30.16 kg

  Package 1 Height
  25 cm

  Package 1 width
  59 cm

  Package 1 Length
  60 cm

  Number of Units in Package 3
  16

  Offer Sustainability
  Sustainable offer status
  Green Premium product

  REACh free of SVHC
  Yes

  EU RoHS Directive
  Compliant EU RoHS Declaration

  Mercury free
  Yes

  RoHS exemption information
  Yes

  WEEE
  The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

  Add to cart

  Quick View