Ceiling Seismic Detector (RK66S) – Kenya
Ceiling Seismic Detector (RK66S) Mtech
RISCO Group’s high security Seismic Detector is your ultimate choice for 24/7 protection of vaults, safes, ATMs, reinforced concrete walls and strong rooms, steel armored cabinets, vending machines and doors.
Powered by RISCO Group’s advanced technologies, the seismic detector monitors the vibration and temperature of the protected surface and will detect all known types of intruder attacks, such as sledge hammers,
Technical Specifications:
Detection coverage: Up to 5m (16.5’’) radius
Adjustable vibration sensitivity: 8 levels by dip switch
Adjustable vibration signal duration: 4 levels by dip switch
Explosion and sledge hammer detection: Dip switch selectable
Vibration generation: External or internal test generator
Sensitivity indication: Bar graph LEDs
Self test indications: Power, low-voltage, logger memory, piezo sensor, temperature sensor
RISCO Bus: Remote parameter setting an diagnostics via RISCO Group security system keypads and PC remote software
EOL resistors: Built-in, jumper selectable
Operating voltage: 9 to 16V DC
Current consumption: Typically 20mA @ 12V DC
Alarm contacts: 24 VDC, O.1A, Form C changeover relay
Tamper contacts: 24 VDC, 0.1A
Alarm contact hold time: 2.5 seconds
Analog signal output: For signal analysis and calibration
Remote test input
Sensitivity reduction input
RISCO Bus: RS485
Operating temperature: -40°C to +70°C (-40°F to 158°F)
Storage temperature: -50°C to +70°C (-58° to 158°F)
Ingress protection rating: IP43
Impatc rating: IK08
RFI immunity: According to EN50130-4
Dimensions (L x H x W): 102 x 27.5 x 80.2 mm (4.0” x 1.1” x 3.2”).
Ceiling Seismic Detector (RK66S) Mtech
RISCO Group’s high security Seismic Detector is your ultimate choice for 24/7 protection of vaults, safes, ATMs, reinforced concrete walls and strong rooms, steel armored cabinets, vending machines and doors.
Powered by RISCO Group’s advanced technologies, the seismic detector monitors the vibration and temperature of the protected surface and will detect all known types of intruder attacks, such as sledge hammers,
Technical Specifications:
Detection coverage: Up to 5m (16.5’’) radius
Adjustable vibration sensitivity: 8 levels by dip switch
Adjustable vibration signal duration: 4 levels by dip switch
Explosion and sledge hammer detection: Dip switch selectable
Vibration generation: External or internal test generator
Sensitivity indication: Bar graph LEDs
Self test indications: Power, low-voltage, logger memory, piezo sensor, temperature sensor
RISCO Bus: Remote parameter setting an diagnostics via RISCO Group security system keypads and PC remote software
EOL resistors: Built-in, jumper selectable
Operating voltage: 9 to 16V DC
Current consumption: Typically 20mA @ 12V DC
Alarm contacts: 24 VDC, O.1A, Form C changeover relay
Tamper contacts: 24 VDC, 0.1A
Alarm contact hold time: 2.5 seconds
Analog signal output: For signal analysis and calibration
Remote test input
Sensitivity reduction input
RISCO Bus: RS485
Operating temperature: -40°C to +70°C (-40°F to 158°F)
Storage temperature: -50°C to +70°C (-58° to 158°F)
Ingress protection rating: IP43
Impatc rating: IK08
RFI immunity: According to EN50130-4
Dimensions (L x H x W): 102 x 27.5 x 80.2 mm (4.0” x 1.1” x 3.2”).





