MikroTik cAP ac – Wireless for home and office
Dual-band 2.4 / 5GHz wireless access point for mounting on a ceiling or wall with two Gigabit Ethernet ports (one with PoE output), 802.11ac support and IPsec hardware encryption support
The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2 GHz 802.11b/g/n and 5 GHz in a/n/ас standards, and will provide coverage in 360 degrees around it. Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output on the second port. Device supports IPsec hardware acceleration too. – cAP ac (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). – cAP ac-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. Send purchase questions Specifications Support & Downloads Gallery Test results Specifications Details Product code RBcAPGi-5acD2nD Architecture ARM 32bit CPU IPQ-4018 CPU core count 4 CPU nominal frequency 488-896 (auto) MHz Switch chip model IPQ-4018 Dimensions Round case: ⌀ 136 mm, height: 30 mm; Square case: 145 mm x 145 mm x 30 mm RouterOS license 4 Operating System RouterOS Size of RAM 128 MB Storage size 16 MB Storage type FLASH MTBF Approximately 100’000 hours at 25C Tested ambient temperature -40°C to 50°C IPsec hardware acceleration Yes Suggested price $85.00 Wireless capabilities Details Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 2 Wireless 2.4 GHz chip model IPQ-4018 Wireless 2.4 GHz generation Wi-Fi 4 Wireless 5 GHz Max data rate 867 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 2.5 Wireless 5 GHz chip model IPQ-4018 Wireless 5 GHz generation Wi-Fi 5 WiFi speed AC1200 Ethernet Details 10/100/1000 Ethernet ports 2 Powering Details Number of DC inputs 1 (PoE-IN) Max power consumption 24 W Max power consumption without attachments 12 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 17-57 V PoE-out Details PoE-out ports Ether2 PoE out Passive PoE up to 57V Max out per port output (input 18-30 V) 500 mA Max out per port output (input 30-57 V) 400 mA Max total out (A) 500 mA Certification & Approvals Details Certification CE, FCC, IC, EAC, ROHS IP 20 Other Details Mode button Yes Wireless specifications 2.4 GHz Transmit (dBm) Receive Sensitivity 1MBit/s 26 -100 11MBit/s 26 -94 6MBit/s 26 -96 54MBit/s 23 -78 MCS0 26 -96 MCS7 22 -73 5 GHz Transmit (dBm) Receive Sensitivity 6MBit/s 26 -96 54MBit/s 21 -80 MCS0 26 -96 MCS7 20 -75 MCS9 18 -70 Included parts 24V 1.2A power adapter Ceiling mount Gigabit PoE injector K-46 screw kit The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase..
Related products
-
Add to cartSturdy And : This V2 30ft cable
replacement is made of excellent rubber and red copper material, which is
sturdy and wear resistant, not easy to be damaged, and has a long service
life. Easy To Install: Thanks to its user friendly design, the rectangular
satellite replacement cable can be easily installed without any complicated
procedures, saving your time and energy. Stable Connection: This rectangular
satellite wire replacement ensures a stable, uninterrupted connection so you
can enjoy seamless Internet access. Wide Application: This for Starlink
rectangular V2 30ft cable has a wide range of applications and can be used
for communication systems, automation systems, network connections and so on.
Good Compatibility: This for Starlink satellite cable replacement is
compatible with a wide range of routers, providing versatility and
flexibility. -
Add to cart[(Durable for Indoor/Outdoor Use)] –
Durable sheath, waterproof and rainproof, suitable for indoor and outdoor.
[(Great for Starlink Gen 2)] – It seamlessly integrates with the original
Starlink V2 Standard Actuated/High Performance/Flat High Performance
Satellite Cable, this replacement cable guarantees interference-free
connectivity and non-disruptive repairs. [(Plug and Play)] – Plug and play
functionality for effortless installation, providing convenience and ease of
setup without the need for complicated procedures. [(Faster Data
Transmission)] – This Replacement Cable utilizes CAT6 networking cable,
offering quicker data transfer rates and enhanced resistance to interference.
[(Packing List)] – 1 x 30ft transmission cable for Starlink -
Add to cart5.8GHz / 300Mbps High-Speed Transmission:
This wireless bridge utilize advanced 5.8GHz 300Mbps wireless technology and
are equipped with a 12dBi high-gain antenna. With a maximum transmission
range of up to 2 miles (Barrier-free), they offer reliable and fast
connectivity. The built-in 100Mbps LAN port ensures seamless wired network
speed, making it ideal for point-to-point internet access sharing, remote IP
camera surveillance, or remote network Wi-Fi access. PTMP Pre-programmed for
Easy Setup: Simply connect both bridges to the PoE adapters using Ethernet
cables, and the system will automatically power on. After waiting for 1
minute, the equipment will pair and establish a connection. The
“Link” green LED indicator confirms successful pairing. This
feature simplifies installation and eliminates the need for complex
configurations, perfect for extending internet access to locations like
garages, barns, stores, and warehouses using 5.8GHz wireless transmission
instead of c -
Add to cartHIGH POWER: For starlink satellite
network 150W GigE PoE injector efficiently deliver 150W power to support for
Starlink Satellite Dish V2(with 12V 15A input, 12V to 48V 3A 144W), for
Starlink Gen 3(with 12V 15A input, 12V to 56V 3A 168W) for reliable performance
HIGH SPEED CONNECTIVITY: For Starlink PoE equipped with 10, 100, 1000Mb/s
network speed for fast data transmission. At the same time, also support four
pairs of Gigabit Ethernet to achieve faster data transmission speed, ensuring
faster and more stable network connections VERSATILE POWER INPUT: DC 48~57V
input range for starlink PoE injector accept standard for Starlink cable and
conventional network cables, allowing easy connection to a computer network
port with the other end accepting 48V DC for efficient power supply.
Providing flexibility for various for starlink accessories setups EFFICIENT
POWER MANAGEMENT: Designed with a 3A maximum input output, ensuring optimal
power distribution for starlink Dishy -
Add to cart[(Durable for Indoor/Outdoor Use)] –
Durable sheath, waterproof and rainproof, suitable for indoor and outdoor.
[(Great for Starlink Gen 2)] – It seamlessly integrates with the original
Starlink V2 Standard Actuated/High Performance/Flat High Performance
Satellite Cable, this replacement cable guarantees interference-free
connectivity and non-disruptive repairs. [(Plug and Play)] – Plug and play
functionality for effortless installation, providing convenience and ease of
setup without the need for complicated procedures. [(Faster Data
Transmission)] – This Replacement Cable utilizes CAT6 networking cable,
offering quicker data transfer rates and enhanced resistance to interference.
[(Packing List)] – 1 x 10ft transmission cable for Starlink
Reviews
There are no reviews yet.