Transmodulator with Remultiplexing Single DVBS/S2 – DVBC…
KSh343,398.00
Transmodulator that generates a QAM multiplex from the multiplexing of services available in up to 3 different SAT TV transponders. Extracted from a single satellite through the input loop itself to the header. Televes 564101
Transmodulator that generates a QAM multiplex from the multiplexing of services available in up to 3 different SAT TV transponders. Extracted from a single satellite through the input loop itself to the header.?
Highlights
Total or selective removal of the services present in the received transponder, to avoid them being detected (and memorized) by the receivers (STB)
Editable TS_ID, which makes programme/service detection easier on the receiver (STB), since the channel scan is based on this identifier
LCN (Logical Channel Number) allows the assignment of the services present in the output to an LCN, which makes the ordering of the channels easier on the receivers (STB)
Provides information regarding both the occupation of each specific service and the global output occupation, which allows the optimization of the services being distributed
Can be remotely controlled using CDC (Headend control)
Features
S_ID editable to prevent the receivers (STB) in an installation from retuning when the output-Multiplex’s services are modified
Editable Network_ID, Original Network_ID and Cell_ID allow the control of network identifiers
The encrypted satellite channels are transformed into free DTT services through the CI interface and the appropriate CAM module. Depending on the CAM type used (standard/professional), one or several services may be opened for free reproduction
Specifications
Reference 564101
SAT INPUT SAT Input frequency range MHz 950…2150
Frequency steps 1
Input level dB?V 42 – 82
Loop-through losses dB ? 1.5
LNB powering Vdc 13V/17V/ OFF – 22KHz (ON/OFF)
Input return losses (typ.) dB > 10?
Input impedance ? 75
DVB-S Symbol rate (Modulation) Mbaud 2 – 42.5 (QPSK)
FEC inner code Viterbi (1/2, 2/3, 3/4, 5/6, 7/8)
FEC outer code RS (188/204)
Roll-Off factor % 35
DVB-S2 Symbol rate (Modulation) Mbaud 10 – 30 (QPSK, 8PSK)
FEC inner code LDPC (1/2, 1/3, 1/4, 2/3, 2/5, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10)
FEC outer code BCH (Bose-Chaudhuri-Hocquenghem)
Roll-Off factor % 20, 25, 35
DVB-C OUTPUT QAM Modulation (Constellation) 16, 32, 64, 128, 256QAM
Symbol rate Mbaud < 6.9
Scrambling DVB EN 300429
Interleaving DVB EN 300429
FEC outer code RS (188, 204)
Roll-Off factor % 15
PCR Correction Yes
Services deleting Yes
Network_ID Yes
Original Network_ID Yes
TS_ID Yes
LCN Yes
Spectral inversion Normal, Inverted
Channel bandwidth Mhz 8.3
RF Output frequency 46...862
Frequency steps KHz 250
Output level (max. typ.) dB?V ?80 ? 5
Output level regulation margin dB >15
Output loop-through losses
? 1.5
Output return losses (typ.) > 12
Impedance ? 75
GENERAL Powering voltage Vdc 24
Consumption mA 520 (0 LNB – 0 CAM)
620 (0 LNB – 1 CAM)
870 (1 LNB – 1 CAM)
1120 (2 LNBs – 1 CAM)
Protection index IP 20
Related products
-
Add to cartThe content generated consists of up to four services since it has four analog composite video inputs (CVBS). They generate DVBT, DVBC (QAM Annex A) or ITUJ83 (QAM Annex B) output. These modules can encode the video in MPEG-2 format or in H.264 (HDTV). Televes 563822
-
DVBS/S2 Transmodulator with CI – COFDM Televes
KSh249,986.00Add to cartEquipped with CI. The transmodulator receives a SAT transponder in DVBS (QPSK) or DVBS2 (QPSK /8PSK) modulation and demodulates it, producing an MPEG-2 transport packet. The MPEG2 transport packet is subsequently modulated in COFDM and converted into the output channel (UHF or VHF, with a 7/8 MHz bandwidth), using an agile up-converter. Televes 563301
-
Twin Transmodulator DVBS/S2 – DVBC (QAM Annex A) Televes
KSh281,204.00Add to cartTransmodulator that generates two QAM (DVB-C) Multiplex from the services available in either a TV SAT transponder or two transponders of the same band and polarization. Highlights Total or selective removal of the services present in the received transponder, to avoid them being detected (and memorized) by the receivers (STB) Editable TS_ID, which makes programme/service …
Twin Transmodulator DVBS/S2 – DVBC (QAM Annex A) TelevesRead More
-
Add to cartFiber optic receiver T.0X series SC / APC S / RET. High energy efficiency High power optical emitter (4mW). Multi-window receiver (1200 – 1600nm). Receiver with high RF output power (114dB?V in MATV and 117dB?V in FI).
-
Johansson 8210 HDMI to IPTV Streamer
KSh103,660.00Add to cartHDMI Streamer: 1 HDMI input / 1 HDMI loop through / 1 IP streaming port
Put an HDMI stream on your local OR WORLDWIDE network The Johansson HDMI Streamer is designed for small to medium-sized projects.?
It is a High Definition Video and Audio Encoder that makes it easy to put your HDMI source on a (local) network and/or internet.?
This gives the end-user the flexibility to see your real-time video content on their preferred (mobile) device: smartphone, tablet, laptop or TV.?
The end-user can simply surf to a dedicated webpage or streaming service. No need to install a mobile application or additional software, it works on any web browser.?
Interesting for local video (surveillance cams, digital signage, advertisements, info channel, creating your own local broadcast, etc) and for streaming to live platforms (e.g. Facebook Live, YouTube Live, Ustream, Wowza, etc).?
The 8210 has multiple functionalities:?
Enable a HDMI source on your local network using the built-in webpage (HLS unicast)?
Multicast a HDMI source for an IPTV application (UDP multicast)?
Publish your live stream to an online platform (RTMP)?
HDMI loop-through for simultaneous viewing on a local TV
Specifications
Inputs – 1x HDMI
Outputs – 1x IP Ethernet RJ-45 jack (for streaming+WebGUI)?
1x HDMI loopthrough
HDMI input – Video resolution: 576i up to 1080p?
Video encoding: H264/AVC?
Video bitrate encoding: from 1 Mbps to 30Mbps?
Audio encoding: MPEG2?
Audio bitrate encoding: 32 -192 Kbps?
Streaming port Mbps 10/100
Ethernet OTT encapsulation – HLS (Apple HTTP Live Streaming) (unicast)
Ethernet multicasting – Possible to output UDP multicast (requires external IGMP snooping equipment)
Simultaneous users – Up to 30 (depending on the bitrate and the network infrastructure)
Input resolution – Up to 1080p60
Supported playback 0 All HTML 5 browsers on Android/iPhone/Mac/PC/SmartTV/??
No need to install mobile application or additional software?
Configuration – Network/login/input encoder settings/output multicast settings
Power consumption W 5
Operating temperature ?C 0 to +50 (for indoor use only)
Dimensions mm 155 x 120 x 50
Weight Kg 0,6
Reviews
There are no reviews yet.