Ubiquiti Networks UFiber Loco Gateway/Controller 10, 100, 1000 Mbit/s (UF-LOCO)
KSh6,896.40
GPON
customer-premises equipment (CPE) that pairs high performance with extremely
low power consumption.
(1) GPON port
(1) GbE RJ45 LAN port and 24V PoE in
Note. This device is designed to be used with the UFiber OLT. Third-party
OLTs may not be compatible or are unable to reliably connect to the ONU.
Ubiquiti
Networks UFiber Loco Gateway/Controller 10, 100, 1000 Mbit/s
UFiber Loco GPON CPE
The sleek UFiber loco is a robust, high?performance GPON CPE that features
extremely low power consumption and the choice of 24V passive PoE or
Micro?USB power.
Low-Cost GPON Optical Network Unit
Sporting a sleek industrial design, the UFiber loco is a robust,
high-performance GPON CPE that features extremely low power consumption and
two power options.
Status LEDs
The easy-to-read LEDs provide status information: Ethernet connection,
signal strength, and power.
Versatile Power
The UFiber loco can be powered by a Micro-USB Power Adapter (included) or 24V
passive PoE.
Designed for Integration
Up to 128 UFiber loco devices can be connected to a single GPON port.
Supporting GPON links of up to 20 km, the UFiber loco integrates with the
UFiber OLT and third-party OLT devices
Additional Product Notes
Sporting High-Performance GPON CPE
LED diodes for easy diagnostics
Up to 2.4 Gbps Downstream and 1.2 Gbps Upstream
Supports up to 20 km GPON Links
Powerful Layer 2/3 Management Features
GPON WAN Port
RJ45 Gigabit LAN Port
SC/APC Fiber Connector a sleek industrial design, the U?Fiber loco is a
robust, high?performance GPON CPE that features extremely low power
consumption and two power options.
Ethernet LAN data rates Data transfer rate Ethernet LAN (RJ-45) ports LED
indicators
10,100,1000 Mbit/s 2.488 Gbit/s 1 Network, Power, Signal strength
Related products
-
Add to cart>
Simplicity>
Plug-and-Play, so no software required>
Reduces installation and network equipment costs by removing the need for electrical wiring>
Provides power over existing network cabling when paired with a Power Source Equipment (such as the DPE-301GI) to a non-PoE device>
Flexible Power Options>
Separates a PoE Ethernet cable into DC power and a standard Ethernet cable>
Supports 5 V, 9 V, and 12 V output voltages>
Transforms incoming AC power to low-voltage DC power Gigabit Connectivity>
Receives power up to 100 metres away>
Connect your devices at Gigabit speeds>
Auto-negotiation on Ethernet port Reliability>
IEEE 802.3at (PoE+) and IEEE 802.3af (PoE) compliant>
Compatible with all standard PoE devices and restricts power input to avoid damaging Power Sourcing Equipment (PSE)>
Overcurrent protection voltage (5 V, 9 V, or 12 V) and plugging in Ethernet cables; no additional software is required -
Add to cartPoint-to-multipoint
WiFi router with a GPON WAN port and (4) Gigabit RJ45 ports.(1) GPON port
Integrated 4-port GbE switch
Integrated WiFi4
Dying gasp support
Note: This device is only compatible with the UFiber OLT. It cannot be used
with third-party OLTs.
Reviews
There are no reviews yet.