Showing all 47 results

• 

  500VA APC Easy UPS, BV500VA 230V, BV500I-MSX UPS – Kenya

  KSh9,900.00

  500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS 

  500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

  APC Easy UPS BV 500VA 230V  Allow flexibility for setup in tight locations and mounting on wall or other surfaces. APC Easy UPS BV 500VA 230V battery Back up and protect your hardware and data during power outages, surges and spikes.

  500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. BV500I-MSX UPS  Maximizes battery performance, life, and reliability through intelligent, precision charging.

  BV500I-MSX UPS AVR Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

  500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS Specification

  Output – Output power capacity 300Watts / 500VA – Max Configurable Power (Watts) 300Watts / 500VA – Nominal Output Voltage 230V – Output Frequency (not synced) 50/60 Hz +/-1 Hz – Topology Line Interactive – Waveform type Stepped approximation to a sinewave – Transfer Time 6ms typical : 10ms maximum

  Input – Nominal Input Voltage 230V – Input frequency 50/60 Hz +/- 5 Hz (auto sensing) – Input Connections IEC-320 C14 – Cord Length 1.52meters – Number of Power Cords 1 – Batteries & Runtime – Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof – Expected Battery Life (years) 3 – 5 – Efficiency View Efficiency Graph (Available in Technical Tab on site)

  Communications & Management – Control panel LED Status display with On Line : On Battery – Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm – Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. – Product link: APC-EASY-UPS-BV-500VA-AVR-Universal-Outlet-230V/P-BV500I-MS Page 1 of 2

  Technical Specifications – APC EASY UPS BV 500VA, AVR, Universal Outlet, 230V | BV500I-MS | Downloaded on 05/30/2019 (EST) Physical – Maximum Height 92MM, 9.25CM – Maximum Width 160MM, 16.05CM – Maximum Depth 305MM, 30.5CM – Net Weight 3.9KG – Shipping weight 4.2KG – Shipping Height 237MM, 23.7CM – Shipping Width 143MM, 14.3CM – Shipping Depth 373MM, 37.3CM – SCC Codes 1073130433829 8

  Environmental – Operating Temperature 0 – 40 °C – Operating Relative Humidity 0 – 90 % – Operating Elevation 0-1968.3meters – Audible noise at 1 meter from surface of unit

  APC 500VA Specifications
  Capacity: 500VA/300W
  Input voltage: 230V
  Output voltage: 230V
  Output connections: Universal Outlet x 2
  Input connection: IEC-320 C14
  Output waveform: Stepped approximation to a sinewave
  Transfer time: 6ms typical, 10ms maximum
  Surge energy rating: 273 Joules
  Battery type: Sealed, maintenance-free lead-acid
  Typical recharge time: 6 hours
  Backup runtime: Up to 10 minutes at half load, 3 minutes at full load
  Audible noise: Less than 40 dBA at 1 meter distance
  Operating temperature: 0°C to 40°C.
  Dimensions (H x W x D): 161 x 123 x 190 mm
  Weight: 4.3 kg

  Add to cart

  Quick View
• 

  500VA APC Easy UPS, BV500VA 230V, BV500I-MSX UPS – Kenya

  KSh9,900.00

  500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS 

  500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

  APC Easy UPS BV 500VA 230V  Allow flexibility for setup in tight locations and mounting on wall or other surfaces. APC Easy UPS BV 500VA 230V battery Back up and protect your hardware and data during power outages, surges and spikes.

  500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. BV500I-MSX UPS  Maximizes battery performance, life, and reliability through intelligent, precision charging.

  BV500I-MSX UPS AVR Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

  500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS Specification

  Output – Output power capacity 300Watts / 500VA – Max Configurable Power (Watts) 300Watts / 500VA – Nominal Output Voltage 230V – Output Frequency (not synced) 50/60 Hz +/-1 Hz – Topology Line Interactive – Waveform type Stepped approximation to a sinewave – Transfer Time 6ms typical : 10ms maximum

  Input – Nominal Input Voltage 230V – Input frequency 50/60 Hz +/- 5 Hz (auto sensing) – Input Connections IEC-320 C14 – Cord Length 1.52meters – Number of Power Cords 1 – Batteries & Runtime – Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof – Expected Battery Life (years) 3 – 5 – Efficiency View Efficiency Graph (Available in Technical Tab on site)

  Communications & Management – Control panel LED Status display with On Line : On Battery – Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm – Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. – Product link: APC-EASY-UPS-BV-500VA-AVR-Universal-Outlet-230V/P-BV500I-MS Page 1 of 2

  Technical Specifications – APC EASY UPS BV 500VA, AVR, Universal Outlet, 230V | BV500I-MS | Downloaded on 05/30/2019 (EST) Physical – Maximum Height 92MM, 9.25CM – Maximum Width 160MM, 16.05CM – Maximum Depth 305MM, 30.5CM – Net Weight 3.9KG – Shipping weight 4.2KG – Shipping Height 237MM, 23.7CM – Shipping Width 143MM, 14.3CM – Shipping Depth 373MM, 37.3CM – SCC Codes 1073130433829 8

  Environmental – Operating Temperature 0 – 40 °C – Operating Relative Humidity 0 – 90 % – Operating Elevation 0-1968.3meters – Audible noise at 1 meter from surface of unit

  APC 500VA Specifications
  Capacity: 500VA/300W
  Input voltage: 230V
  Output voltage: 230V
  Output connections: Universal Outlet x 2
  Input connection: IEC-320 C14
  Output waveform: Stepped approximation to a sinewave
  Transfer time: 6ms typical, 10ms maximum
  Surge energy rating: 273 Joules
  Battery type: Sealed, maintenance-free lead-acid
  Typical recharge time: 6 hours
  Backup runtime: Up to 10 minutes at half load, 3 minutes at full load
  Audible noise: Less than 40 dBA at 1 meter distance
  Operating temperature: 0°C to 40°C.
  Dimensions (H x W x D): 161 x 123 x 190 mm
  Weight: 4.3 kg

  Add to cart

  Quick View
• 

  800VA APC Easy UPS, 230V, BV800I-MSX UPS – Kenya

  KSh16,000.00

  800VA APC Easy UPS 230V BV800I-MSX UPS

  800VA APC Easy UPS 230V BV800I-MSX UPS have Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Expected Battery Life (years) : 3 – 5. 800VA APC Easy UPS  has  Alarm when on battery distinctive low battery alarm : overload continuous tone alarm.

  Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers 800VA APC Easy UPS 230V Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

  APC Easy UPS 230V BV800I-MSX UPS Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

  APC Easy UPS 230V BV800I-MSX UPS specification
  Capacity: 800VA/480W
  Input Voltage: 230V
  Output Voltage: 230V
  Output Frequency: 50/60Hz ± 3Hz
  Waveform Type: Stepped approximation to a sinewave
  Transfer Time: 6ms typical, 10ms maximum
  Surge Energy Rating: 273 Joules.
  Battery Type: Sealed, maintenance-free lead-acid
  Recharge Time: 6 hours typical
  Battery Backup Runtime: Up to 20 minutes (half load), up to 6 minutes (full load)
  Outlets: 4 x IEC 320 C13
  Audible Noise: Less than 40 dBA at 1 meter
  Operating Temperature: 0°C to 40°C
  Dimensions: 220 x 161 x 300 mm
  Weight: 6.6 kg
  Main
  acoustic level
  40 dBA

  battery curve
  B

  battery type
  Lead-acid battery

  product certifications
  IRAM

  curve equation
  Efficiency

  curve fixed loss
  0.0285

  curve load maximum
  100 %

  curve load minimum
  3 %

  curve proportional loss
  0

  curve square loss
  0.0029
  curve test cond ID
  Curve fit of data measured in accordance with the ENERGY STAR Test Method for Uninterruptible Power Supplies. All measurements taken in normal mode(s), at typical environmental conditions, with 230V/50Hz electrical input and balanced resistive load (PF = 1.0) output.

  curve X-axis maximum
  100 %

  curve X-axis minimum
  0 %

  curve X-axis title
  Load

  curve X-axis units
  Percentage

  curve Y-axis maximum
  100 %

  curve Y-axis minimum
  50 %

  curve Y-axis title
  Efficiency

  curve Y-axis units
  Percentage

  extended runtime
  0

  Maximum configurable power in VA
  800 VA

  Maximum configurable power in W
  450 W

  liquid value
  0

  mounting mode
  Not rack-mountable

  mounting preference
  No preference

  number of battery filled slots
  0

  number of battery free slots
  0

  Battery recharge time
  8 h

  cable length
  1.50 m

  depth
  30.5 cm

  height
  9.25 cm

  number of cables
  1

  Number of power module filled slots
  0

  Number of power module free slots
  0

  net weight
  5.3 kg

  rated power in VA
  800 VA

  rated power in W
  450 W

  Surge energy rate
  156 J

  width
  16.05 cm

  operating altitude
  0…6667 ft

  ambient air temperature for operation
  0…40 °C

  battery life
  3…5 year(s)

  ambient air temperature for storage
  -20…50 °C

  storage altitude
  0.00…15240.00 m

  Transfer time
  6 ms typical : 10 ms maximum

  standards
  EN/IEC 62040-1 EN/IEC 62040-2

  UPS size
  WS

  UPS type
  Line interactive

  Wave type
  Stepped approximation to a sinewave

  graph display
  1

  redundant
  No

  show note OP temperature
  No

  two post mountable
  0

  No

  colour
  Black

  input voltage
  230 V

  IP degree of protection
  IP20

  nb of power socket outlets
  4 Argentinean

  network frequency
  50/60 Hz +/- 5 Hz auto-sensing

  output voltage
  230 V

  plug standard
  IRAM 2073

  provided equipment
  User manual

  relative humidity
  0…90 %

  input voltage limits
  170…280 V

  Battery power in VAH
  0 VAh runtime

  Output
  output frequency
  50/60 Hz +/- 1 Hz unsynchronised

  Communications & Management
  control panel
  LED Status display with on line : on battery

  alarm
  Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

  Packing Units
  Package 1 Weight
  5.6 kg

  Package 1 Height
  23.7 cm

  Package 1 width
  363.2 cm

  Package 1 Length
  37.3 cm

  SCC14
  10731304341618

  Conclusions

  The APC 800VA Easy UPS is a reliable power backup solution designed to provide protection for your electronic devices in the event of power outages or fluctuations. With a capacity of 800VA and an output power of 480W, it can support a range of equipment such as computers, networking devices, and home entertainment systems.

  Add to cart

  Quick View
• 

  800VA APC Easy UPS, 230V, BV800I-MSX UPS – Kenya

  KSh16,000.00

  800VA APC Easy UPS 230V BV800I-MSX UPS

  800VA APC Easy UPS 230V BV800I-MSX UPS have Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Expected Battery Life (years) : 3 – 5. 800VA APC Easy UPS  has  Alarm when on battery distinctive low battery alarm : overload continuous tone alarm.

  Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers 800VA APC Easy UPS 230V Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

  APC Easy UPS 230V BV800I-MSX UPS Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

  APC Easy UPS 230V BV800I-MSX UPS specification
  Capacity: 800VA/480W
  Input Voltage: 230V
  Output Voltage: 230V
  Output Frequency: 50/60Hz ± 3Hz
  Waveform Type: Stepped approximation to a sinewave
  Transfer Time: 6ms typical, 10ms maximum
  Surge Energy Rating: 273 Joules.
  Battery Type: Sealed, maintenance-free lead-acid
  Recharge Time: 6 hours typical
  Battery Backup Runtime: Up to 20 minutes (half load), up to 6 minutes (full load)
  Outlets: 4 x IEC 320 C13
  Audible Noise: Less than 40 dBA at 1 meter
  Operating Temperature: 0°C to 40°C
  Dimensions: 220 x 161 x 300 mm
  Weight: 6.6 kg
  Main
  acoustic level
  40 dBA

  battery curve
  B

  battery type
  Lead-acid battery

  product certifications
  IRAM

  curve equation
  Efficiency

  curve fixed loss
  0.0285

  curve load maximum
  100 %

  curve load minimum
  3 %

  curve proportional loss
  0

  curve square loss
  0.0029
  curve test cond ID
  Curve fit of data measured in accordance with the ENERGY STAR Test Method for Uninterruptible Power Supplies. All measurements taken in normal mode(s), at typical environmental conditions, with 230V/50Hz electrical input and balanced resistive load (PF = 1.0) output.

  curve X-axis maximum
  100 %

  curve X-axis minimum
  0 %

  curve X-axis title
  Load

  curve X-axis units
  Percentage

  curve Y-axis maximum
  100 %

  curve Y-axis minimum
  50 %

  curve Y-axis title
  Efficiency

  curve Y-axis units
  Percentage

  extended runtime
  0

  Maximum configurable power in VA
  800 VA

  Maximum configurable power in W
  450 W

  liquid value
  0

  mounting mode
  Not rack-mountable

  mounting preference
  No preference

  number of battery filled slots
  0

  number of battery free slots
  0

  Battery recharge time
  8 h

  cable length
  1.50 m

  depth
  30.5 cm

  height
  9.25 cm

  number of cables
  1

  Number of power module filled slots
  0

  Number of power module free slots
  0

  net weight
  5.3 kg

  rated power in VA
  800 VA

  rated power in W
  450 W

  Surge energy rate
  156 J

  width
  16.05 cm

  operating altitude
  0…6667 ft

  ambient air temperature for operation
  0…40 °C

  battery life
  3…5 year(s)

  ambient air temperature for storage
  -20…50 °C

  storage altitude
  0.00…15240.00 m

  Transfer time
  6 ms typical : 10 ms maximum

  standards
  EN/IEC 62040-1 EN/IEC 62040-2

  UPS size
  WS

  UPS type
  Line interactive

  Wave type
  Stepped approximation to a sinewave

  graph display
  1

  redundant
  No

  show note OP temperature
  No

  two post mountable
  0

  No

  colour
  Black

  input voltage
  230 V

  IP degree of protection
  IP20

  nb of power socket outlets
  4 Argentinean

  network frequency
  50/60 Hz +/- 5 Hz auto-sensing

  output voltage
  230 V

  plug standard
  IRAM 2073

  provided equipment
  User manual

  relative humidity
  0…90 %

  input voltage limits
  170…280 V

  Battery power in VAH
  0 VAh runtime

  Output
  output frequency
  50/60 Hz +/- 1 Hz unsynchronised

  Communications & Management
  control panel
  LED Status display with on line : on battery

  alarm
  Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

  Packing Units
  Package 1 Weight
  5.6 kg

  Package 1 Height
  23.7 cm

  Package 1 width
  363.2 cm

  Package 1 Length
  37.3 cm

  SCC14
  10731304341618

  Conclusions

  The APC 800VA Easy UPS is a reliable power backup solution designed to provide protection for your electronic devices in the event of power outages or fluctuations. With a capacity of 800VA and an output power of 480W, it can support a range of equipment such as computers, networking devices, and home entertainment systems.

  Add to cart

  Quick View
• 

  APC 1400VA Backup UPS , 230V AVR IEC Sockets 700Watts/1.4kVA UPS, BX1400UI – Kenya

  KSh29,305.00

  APC Back-UPS 1400VA 230V AVR IEC Sockets 700Watts/1.4kVA 

  APCs Back-UPS 1400 protect your electronic equipment from damage due to power outages, surges and spikes while providing short term battery power during an outage.

  The Back-UPS 1400 features Automatic Voltage Regulation (AVR),which instantly adjusts high and low voltage fluctuations to safe levels for your electronics, saving battery power for when you need it most during storms and power outages. Additionally, Australian sockets make for easy-to-use connection of protected equipment.

  APC 1400VA UPS Specification
  Capacity: 1400VA / 700 Watts
  Input Voltage: 230V
  Output Voltage: 230V
  UPS Topology: Standby
  Waveform Type: Stepped approximation to a sinewave
  Transfer Time: 4 ms typical
  Input Connections: IEC-320 C14
  Output Connections: 6 x IEC 320 C13
  Battery Type: Sealed lead-acid
  Battery Runtime: Varies depending on the load
  Recharge Time: 10 hours
  Communication Ports: USB
  Interface Port: RJ-45 10/100 Base-T Ethernet
  Audible Alarms: On Battery, Low Battery, Overload, Replace Battery
  Surge Energy Rating: 273 Joules
  Operating Temperature: 0°C to 40°C (32°F to 104°F)
  Dimensions: 215mm x 130mm x 336mm (8.46? x 5.12? x 13.23?)
  Weight: 12.5 kg (27.56 lbs)

  Conclusion

  The APC 1400VA Backup UPS provides reliable backup power and surge protection for your electronic devices. It features Automatic Voltage Regulation (AVR) to stabilize the input voltage and protect your equipment from voltage fluctuations.

  The UPS has multiple IEC output sockets to accommodate your devices. With its USB communication port, you can connect the UPS to your computer for monitoring and management.

  Add to cart

  Quick View
• 

  APC 1400VA Backup UPS , 230V AVR IEC Sockets 700Watts/1.4kVA UPS, BX1400UI – Kenya

  KSh29,305.00

  APC Back-UPS 1400VA 230V AVR IEC Sockets 700Watts/1.4kVA 

  APCs Back-UPS 1400 protect your electronic equipment from damage due to power outages, surges and spikes while providing short term battery power during an outage.

  The Back-UPS 1400 features Automatic Voltage Regulation (AVR),which instantly adjusts high and low voltage fluctuations to safe levels for your electronics, saving battery power for when you need it most during storms and power outages. Additionally, Australian sockets make for easy-to-use connection of protected equipment.

  APC 1400VA UPS Specification
  Capacity: 1400VA / 700 Watts
  Input Voltage: 230V
  Output Voltage: 230V
  UPS Topology: Standby
  Waveform Type: Stepped approximation to a sinewave
  Transfer Time: 4 ms typical
  Input Connections: IEC-320 C14
  Output Connections: 6 x IEC 320 C13
  Battery Type: Sealed lead-acid
  Battery Runtime: Varies depending on the load
  Recharge Time: 10 hours
  Communication Ports: USB
  Interface Port: RJ-45 10/100 Base-T Ethernet
  Audible Alarms: On Battery, Low Battery, Overload, Replace Battery
  Surge Energy Rating: 273 Joules
  Operating Temperature: 0°C to 40°C (32°F to 104°F)
  Dimensions: 215mm x 130mm x 336mm (8.46? x 5.12? x 13.23?)
  Weight: 12.5 kg (27.56 lbs)

  Conclusion

  The APC 1400VA Backup UPS provides reliable backup power and surge protection for your electronic devices. It features Automatic Voltage Regulation (AVR) to stabilize the input voltage and protect your equipment from voltage fluctuations.

  The UPS has multiple IEC output sockets to accommodate your devices. With its USB communication port, you can connect the UPS to your computer for monitoring and management.

  Add to cart

  Quick View
• 

  APC 1500VA Smart-UPS, 1.5KVA LCD Rackmount 2U 230V UPS, SMC1500I-2UC – Kenya

  KSh125,000.00

  APC 1500VA Smart-UPS, 1.5KVA  LCD Rackmount  2U 230V UPS, SMC1500I-2UC

  1500VA APC smart UPS Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

  1.5 KVA APC smart UPS Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

  APC smart UPS Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

  1.5 KVA APC smart UPS Specification
  Model: SMC1500I-2UC
  Capacity: 1500VA / 1000W
  Topology: Line Interactive
  Input Voltage: 230V
  Output Voltage: 230V
  Form Factor: Rackmount 2U
  LCD Display: Yes
  Output Connections: 8x IEC 320 C13, 1x IEC 320 C19
  Transfer Time: 2-4 ms
  Waveform Type: Sine wave
  Communication Ports: USB, Serial, SmartSlot
  Software: PowerChute Business Edition.
  Efficiency: Up to 98%
  Battery Type: Sealed lead-acid
  Typical Recharge Time: 3 hours
  Audible Alarm: Yes
  Surge Energy Rating: 459 Joules
  Dimensions (H x W x D): 86 x 432 x 667 mm
  Weight: 27.73 kg

  Conclusion

  The APC 1500VA Smart-UPS, also known as the SMC1500I-2UC, is a reliable and efficient UPS solution designed for rackmount server environments. With a capacity of 1500VA or 1000W, it provides sufficient power backup to keep critical equipment running during power outages.

  The line interactive topology ensures automatic voltage regulation, protecting connected devices from power fluctuations and ensuring stable operation.

  The LCD display allows for easy monitoring of UPS status, input/output voltage, battery charge level, and load capacity. With multiple output connections, including 8x IEC 320 C13 and 1x IEC 320 C19, it can support a variety of devices.

  Add to cart

  Quick View
• 

  APC 1500VA Smart-UPS, 1.5KVA LCD Rackmount 2U 230V UPS, SMC1500I-2UC – Kenya

  KSh125,000.00

  APC 1500VA Smart-UPS, 1.5KVA  LCD Rackmount  2U 230V UPS, SMC1500I-2UC

  1500VA APC smart UPS Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

  1.5 KVA APC smart UPS Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

  APC smart UPS Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

  1.5 KVA APC smart UPS Specification
  Model: SMC1500I-2UC
  Capacity: 1500VA / 1000W
  Topology: Line Interactive
  Input Voltage: 230V
  Output Voltage: 230V
  Form Factor: Rackmount 2U
  LCD Display: Yes
  Output Connections: 8x IEC 320 C13, 1x IEC 320 C19
  Transfer Time: 2-4 ms
  Waveform Type: Sine wave
  Communication Ports: USB, Serial, SmartSlot
  Software: PowerChute Business Edition.
  Efficiency: Up to 98%
  Battery Type: Sealed lead-acid
  Typical Recharge Time: 3 hours
  Audible Alarm: Yes
  Surge Energy Rating: 459 Joules
  Dimensions (H x W x D): 86 x 432 x 667 mm
  Weight: 27.73 kg

  Conclusion

  The APC 1500VA Smart-UPS, also known as the SMC1500I-2UC, is a reliable and efficient UPS solution designed for rackmount server environments. With a capacity of 1500VA or 1000W, it provides sufficient power backup to keep critical equipment running during power outages.

  The line interactive topology ensures automatic voltage regulation, protecting connected devices from power fluctuations and ensuring stable operation.

  The LCD display allows for easy monitoring of UPS status, input/output voltage, battery charge level, and load capacity. With multiple output connections, including 8x IEC 320 C13 and 1x IEC 320 C19, it can support a variety of devices.

  Add to cart

  Quick View
• 

  APC 1KVA Easy UPS, SMV1000VA, 230V, SMV1000I-MS UPS – Kenya

  KSh45,000.00

  1KVA APC Easy UPS SMV 1000VA 230V SMV1000I-MS UPS 

  1KVA APC Easy UPS SMV 1000VA 230V SMV1000I-MS UPS Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers. 1KVA APC Easy UPS SMV 1000VA automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

  SMV 1000VA 230V SMV1000I-MS UPS Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

  SMV 1000VA 230V SMV1000I-MS UPS ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

  SMV 1000VA 230V SMV1000I-MS UPS Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. SMV 1000VA 230V SMV1000I-MS UPS Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

  SMV 1000VA 230V SMV1000I-MS UPS specification
  Capacity: 1000VA/600W
  Input voltage: 230V
  Output voltage: 230V
  Output connections: 4 x IEC 320 C13
  Automatic Voltage Regulation (AVR) for voltage stabilization
  Battery backup for uninterrupted operation during power outages
  Interface port: USB
  LCD display for easy monitoring and configuration.
  Audible alarms for power events and battery status
  Surge protection to safeguard connected devices
  Cold-start capable, allowing the UPS to power on without utility power
  Energy-saving mode to reduce energy consumption during periods of low load.
  Intelligent battery management system for enhanced battery life and performance
  Dimensions (H x W x D): 222 x 130 x 382 mm.

  Add to cart

  Quick View
• 

  APC 1KVA Easy UPS, SMV1000VA, 230V, SMV1000I-MS UPS – Kenya

  KSh45,000.00

  1KVA APC Easy UPS SMV 1000VA 230V SMV1000I-MS UPS 

  1KVA APC Easy UPS SMV 1000VA 230V SMV1000I-MS UPS Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers. 1KVA APC Easy UPS SMV 1000VA automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

  SMV 1000VA 230V SMV1000I-MS UPS Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

  SMV 1000VA 230V SMV1000I-MS UPS ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

  SMV 1000VA 230V SMV1000I-MS UPS Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. SMV 1000VA 230V SMV1000I-MS UPS Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

  SMV 1000VA 230V SMV1000I-MS UPS specification
  Capacity: 1000VA/600W
  Input voltage: 230V
  Output voltage: 230V
  Output connections: 4 x IEC 320 C13
  Automatic Voltage Regulation (AVR) for voltage stabilization
  Battery backup for uninterrupted operation during power outages
  Interface port: USB
  LCD display for easy monitoring and configuration.
  Audible alarms for power events and battery status
  Surge protection to safeguard connected devices
  Cold-start capable, allowing the UPS to power on without utility power
  Energy-saving mode to reduce energy consumption during periods of low load.
  Intelligent battery management system for enhanced battery life and performance
  Dimensions (H x W x D): 222 x 130 x 382 mm.

  Add to cart

  Quick View
• 

  APC 1KVA Easy UPS, SRV RM 1000VA 230V ,with RailKit Rackmount UPS, SRV1KRIRK – Kenya

  KSh75,000.00

  APC 1KVA Easy UPS, SRV RM 1000VA 230V ,with RailKit Rackmount UPS,  SRV1KRIRK

  Easy UPS SRV1KRIRK is a rack mount 1000VA/800W online double-conversion uninterruptible power supply providing 11 minutes runtime at 50% load for critical IT servers and electronic systems. The UPS provides power conditioning, a no-break output sinewave supply and has a built-in automatic bypass.

  APC SRV1KRIRK UPS Features
  ECO Mode: an green energy saving mode allowing the input voltage range to be adjusted via the front panel LCD
  Intelligent Battery Management: to maximise battery performance and help extend working life through temperature compensated charing
  Overvoltage Cut-off Device Protection: to prevent damage to the UPS from high over voltage surges
  Input Power Factor Correction: for reduced installation cable costs and generator compatibility
  LCD Display: an intuitive interface provides detailed and accurate information on UPS and battery performance
  Communications Ports: USB, RS232 and dry signal contacts
  Communications Card Interface Slot: for the APC Network Management Card
  Automatic Diagnostic Testing: automatic periodic battery self-testing to provide early indication that the UPS battery requires replacement
  Built-in Automatic Bypass: to safely transfer the UPS load(s) to the mains power supply if the UPS develops a fault condition or is overloaded
  Extended Runtime Battery Packs: L models to scale up the UPS runtime to several hours

  The APC Easy UPS SMV series is available in 1kVA, 2kVA, 3kVA, 6kVA and 10kVA UPS sizes.

  APC Easy UPS SRV1KRIRK Applications
  IT network servers and storage devices
  High performance computers and workstations
  Server room racks
  Data centre server cabinets
  Automated industrial control applications
  APC Easy UPS SRV1KRIRK specifications
  Model: SRV1KRIRK
  Capacity: 1000VA/800W
  Topology: On-Line double-conversion
  Input Voltage: 230V
  Output Voltage: 230V
  Form Factor: Rackmount
  Rack Size: 2U
  Rail Kit: Included
  Outlets: Multiple IEC C13 outlets
  Battery Type: Sealed lead-acid
  Typical Recharge Time: 3 hours
  Communication Ports: Intelligent Card Slot, USB
  Surge Protection: Yes
  Automatic Voltage Regulation (AVR): Yes
  Efficiency: Up to 93%
  LCD Display: Yes.
  Audible Alarm: Yes
  Dimensions (H x W x D): Rack size, 2U
  Weight: Varies depending on configuration

  Add to cart

  Quick View
• 

  APC 1KVA Easy UPS, SRV RM 1000VA 230V ,with RailKit Rackmount UPS, SRV1KRIRK – Kenya

  KSh75,000.00

  APC 1KVA Easy UPS, SRV RM 1000VA 230V ,with RailKit Rackmount UPS,  SRV1KRIRK

  Easy UPS SRV1KRIRK is a rack mount 1000VA/800W online double-conversion uninterruptible power supply providing 11 minutes runtime at 50% load for critical IT servers and electronic systems. The UPS provides power conditioning, a no-break output sinewave supply and has a built-in automatic bypass.

  APC SRV1KRIRK UPS Features
  ECO Mode: an green energy saving mode allowing the input voltage range to be adjusted via the front panel LCD
  Intelligent Battery Management: to maximise battery performance and help extend working life through temperature compensated charing
  Overvoltage Cut-off Device Protection: to prevent damage to the UPS from high over voltage surges
  Input Power Factor Correction: for reduced installation cable costs and generator compatibility
  LCD Display: an intuitive interface provides detailed and accurate information on UPS and battery performance
  Communications Ports: USB, RS232 and dry signal contacts
  Communications Card Interface Slot: for the APC Network Management Card
  Automatic Diagnostic Testing: automatic periodic battery self-testing to provide early indication that the UPS battery requires replacement
  Built-in Automatic Bypass: to safely transfer the UPS load(s) to the mains power supply if the UPS develops a fault condition or is overloaded
  Extended Runtime Battery Packs: L models to scale up the UPS runtime to several hours

  The APC Easy UPS SMV series is available in 1kVA, 2kVA, 3kVA, 6kVA and 10kVA UPS sizes.

  APC Easy UPS SRV1KRIRK Applications
  IT network servers and storage devices
  High performance computers and workstations
  Server room racks
  Data centre server cabinets
  Automated industrial control applications
  APC Easy UPS SRV1KRIRK specifications
  Model: SRV1KRIRK
  Capacity: 1000VA/800W
  Topology: On-Line double-conversion
  Input Voltage: 230V
  Output Voltage: 230V
  Form Factor: Rackmount
  Rack Size: 2U
  Rail Kit: Included
  Outlets: Multiple IEC C13 outlets
  Battery Type: Sealed lead-acid
  Typical Recharge Time: 3 hours
  Communication Ports: Intelligent Card Slot, USB
  Surge Protection: Yes
  Automatic Voltage Regulation (AVR): Yes
  Efficiency: Up to 93%
  LCD Display: Yes.
  Audible Alarm: Yes
  Dimensions (H x W x D): Rack size, 2U
  Weight: Varies depending on configuration

  Add to cart

  Quick View
• 

  APC 1KVA Smart-UPS, 600Watts/1000VA, Input 230V/Output 230V,Interface Port USB, Rack Height 2U Rackmount UPS, SMC1000I-2U – Kenya

  KSh86,000.00

   APC 1KVA Smart-UPS, 600Watts/1000VA, Input 230V/Output 230V,Interface Port USB, Rack Height 2U Rackmount UPS, SMC1000I-2U

  APC Smart-UPS,600 Watts /1000 VA,Input 230V /Output 230V, Interface Port USB, Rack Height 2 U Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, USB cable Standard Lead Time: Usually Ships within 2 Weeks.

  The APC SMC1000I-2U Smart-UPS is a rackmount UPS with a power capacity of 600 Watts / 1000 VA. It provides reliable backup power and protection for critical electronics in server rooms and network closets. With its 2U rack height and USB interface port, it is designed to fit seamlessly into your rack-mounted setup.

  The UPS features 8 outlets with IEC 320 C13 connectors to accommodate your devices. It delivers a pure sine wave output for compatibility with sensitive equipment. The UPS has a built-in battery that can provide backup power for up to 18.5 minutes at half load and 5.9 minutes at full load. It offers surge protection with a surge energy rating of 459 Joules.

   APC 1KVA Smart-UPS Specifications
  Model: SMC1000I-2U
  Power Capacity: 600 Watts / 1000 VA
  Input Voltage: 230V
  Output Voltage: 230V
  Rack Height: 2U
  Interface Port: USB
  Number of Outlets: 8
  Outlet Type: IEC 320 C13
  Waveform Type: Sine wave
  Nominal Input/Output Frequency: 50/60 Hz
  Input Voltage Range: 160-286V
  Output Voltage Regulation: ± 3%
  Transfer Time: 6 ms typical, 10 ms maximum
  Battery Type: Maintenance-free, sealed lead-acid battery with suspended electrolyte
  Typical Backup Time at Half Load: 18.5 minutes
  Typical Backup Time at Full Load: 5.9 minutes.
  Surge Energy Rating: 459 Joules
  Maximum Height: 86 mm
  Maximum Width: 432 mm
  Maximum Depth: 457 mm
  Weight: 20.91 kg
  Audible Alarm: Alarm when on battery, low battery, and overload
  LED Indicators: Online, On Battery, Replace Battery
  Communication Ports: USB
  Software: PowerChute Business Edition
  Features

  UPS topology Line-Interactive
  Output power capacity 1 kVA
  Output power 600 W
  Waveform Sine
  Input operation voltage (min) 180 V
  Input operation voltage (max) 287 V
  Input frequency 50/60 Hz
  Output frequency regulation 57 – 63 Hz
  Automatic Voltage Regulation (AVR)

  Surge energy rating 459 J
  Hold time (max) 2 ms
  Noise level 42 dB
  Audible alarm(s)

  Auto-restart

  Ports & interfaces

  AC outlet types C13 coupler
  Power plug C14 coupler
  AC outlets quantity 4 AC outlet(s)
  Number of output IEC jumpers 2
  USB port

  Battery

  Battery technology Sealed Lead Acid (VRLA)
  Battery capacity 170 VAh
  Battery life (max) 6 year(s)
  Battery recharge time 3 h
  Hot-swap battery

  Automatic battery test

  Cold start

  Replacement battery cartridge APCRBC124

  Design

  Form factor Rackmount
  Product colour Black
  Rack capacity 2U
  Display type LCD
  Certification REACH, C-tick, CE, GOST, UL 1778, VDE

  Operational conditions

  Operating temperature (T-T) 0 – 40 °C
  Storage temperature (T-T) -15 – 45 °C
  Operating relative humidity (H-H) 0 – 95%
  Storage relative humidity (H-H) 0 – 95%
  Operating altitude 0 – 3000 m
  Non-operating altitude 0 – 15000 m

  Technical details

  Sustainability certificates RoHS

  Weight & dimensions

  Width 432 mm
  Depth 406 mm
  Height 89 mm
  Weight 20.5 kg
  Package width 546 mm
  Package depth 584 mm
  Package height 241 mm
  Package weight 22.3 kg

  Packaging data

  Rack mount kit

  Cables included USB cable
  Quick installation guide

  Software CD

  Logistics data

  Products per pallet 16 pc(s)

  Other features

  Nominal output voltage 230 V
  Nominal input voltage 230 V

  Add to cart

  Quick View
• 

  APC 1KVA Smart-UPS, 600Watts/1000VA, Input 230V/Output 230V,Interface Port USB, Rack Height 2U Rackmount UPS, SMC1000I-2U – Kenya

  KSh86,000.00

   APC 1KVA Smart-UPS, 600Watts/1000VA, Input 230V/Output 230V,Interface Port USB, Rack Height 2U Rackmount UPS, SMC1000I-2U

  APC Smart-UPS,600 Watts /1000 VA,Input 230V /Output 230V, Interface Port USB, Rack Height 2 U Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, USB cable Standard Lead Time: Usually Ships within 2 Weeks.

  The APC SMC1000I-2U Smart-UPS is a rackmount UPS with a power capacity of 600 Watts / 1000 VA. It provides reliable backup power and protection for critical electronics in server rooms and network closets. With its 2U rack height and USB interface port, it is designed to fit seamlessly into your rack-mounted setup.

  The UPS features 8 outlets with IEC 320 C13 connectors to accommodate your devices. It delivers a pure sine wave output for compatibility with sensitive equipment. The UPS has a built-in battery that can provide backup power for up to 18.5 minutes at half load and 5.9 minutes at full load. It offers surge protection with a surge energy rating of 459 Joules.

   APC 1KVA Smart-UPS Specifications
  Model: SMC1000I-2U
  Power Capacity: 600 Watts / 1000 VA
  Input Voltage: 230V
  Output Voltage: 230V
  Rack Height: 2U
  Interface Port: USB
  Number of Outlets: 8
  Outlet Type: IEC 320 C13
  Waveform Type: Sine wave
  Nominal Input/Output Frequency: 50/60 Hz
  Input Voltage Range: 160-286V
  Output Voltage Regulation: ± 3%
  Transfer Time: 6 ms typical, 10 ms maximum
  Battery Type: Maintenance-free, sealed lead-acid battery with suspended electrolyte
  Typical Backup Time at Half Load: 18.5 minutes
  Typical Backup Time at Full Load: 5.9 minutes.
  Surge Energy Rating: 459 Joules
  Maximum Height: 86 mm
  Maximum Width: 432 mm
  Maximum Depth: 457 mm
  Weight: 20.91 kg
  Audible Alarm: Alarm when on battery, low battery, and overload
  LED Indicators: Online, On Battery, Replace Battery
  Communication Ports: USB
  Software: PowerChute Business Edition
  Features

  UPS topology Line-Interactive
  Output power capacity 1 kVA
  Output power 600 W
  Waveform Sine
  Input operation voltage (min) 180 V
  Input operation voltage (max) 287 V
  Input frequency 50/60 Hz
  Output frequency regulation 57 – 63 Hz
  Automatic Voltage Regulation (AVR)

  Surge energy rating 459 J
  Hold time (max) 2 ms
  Noise level 42 dB
  Audible alarm(s)

  Auto-restart

  Ports & interfaces

  AC outlet types C13 coupler
  Power plug C14 coupler
  AC outlets quantity 4 AC outlet(s)
  Number of output IEC jumpers 2
  USB port

  Battery

  Battery technology Sealed Lead Acid (VRLA)
  Battery capacity 170 VAh
  Battery life (max) 6 year(s)
  Battery recharge time 3 h
  Hot-swap battery

  Automatic battery test

  Cold start

  Replacement battery cartridge APCRBC124

  Design

  Form factor Rackmount
  Product colour Black
  Rack capacity 2U
  Display type LCD
  Certification REACH, C-tick, CE, GOST, UL 1778, VDE

  Operational conditions

  Operating temperature (T-T) 0 – 40 °C
  Storage temperature (T-T) -15 – 45 °C
  Operating relative humidity (H-H) 0 – 95%
  Storage relative humidity (H-H) 0 – 95%
  Operating altitude 0 – 3000 m
  Non-operating altitude 0 – 15000 m

  Technical details

  Sustainability certificates RoHS

  Weight & dimensions

  Width 432 mm
  Depth 406 mm
  Height 89 mm
  Weight 20.5 kg
  Package width 546 mm
  Package depth 584 mm
  Package height 241 mm
  Package weight 22.3 kg

  Packaging data

  Rack mount kit

  Cables included USB cable
  Quick installation guide

  Software CD

  Logistics data

  Products per pallet 16 pc(s)

  Other features

  Nominal output voltage 230 V
  Nominal input voltage 230 V

  Add to cart

  Quick View
• 

  APC 2000VA Smart UPS, SMC2000I, LCD 230V 1300 Watt 2000VA UPS – Kenya

  KSh146,720.00

  APC Smart UPS C2000 VALCD 230V 1300 Watt 2000VA 

  APC Smart-UPS C 2000VA LCD, 230V with model no. SMC2000I and maximum output capacity of 1300 watts is ideal UPS for top efficiency power back. This UPS is reputed for outstanding quality and great performance.

  APC Smart-UPS is the UPS of choice, trusted for best backup performance and dependable equipment protection. for load below 1300 watts, the APC Smart-UPS C 2000VA (SMC2000I) is what you need.

  APC Smart UPS C2000 VALCD 230V 1300 Watt 2000VA has excellent features to protect your equipment and deliver the power backup you require. With its boost and trim Automatic Voltage Regulation (AVR) function, your equipment gets extended power supply (lower voltage is regulated to supply your equipment).

  They also get protection from over-voltage. Put differently, APC Smart-UPS C 2000VA (SMC2000I) ensures higher application availability by correcting low and high voltage conditions without using the battery.

  APC Smart-UPS C 2000VA LCD UPS specifications
   
  Capacity: 2000VA / 1300 Watts
  Input Voltage: 230V
  Output Voltage: 230V
  UPS Topology: Line Interactive
  Waveform Type: Sine wave
  Transfer Time: 2-6 ms typical
  Input Connection: IEC-320 C14
  Output Connections: 6 x IEC 320 C13
  Battery Type: Sealed lead-acid
  Battery Runtime: Varies depending on the load
  Recharge Time: 3 hours
  Communication Ports: SmartSlot, USB
  Interface Port: RJ-45 10/100 Base-T Ethernet, USB Type-B
  LCD Display: Yes
  Audible Alarms: Battery Backup, Low Battery, Overload, Replace Battery
  Surge Energy Rating: 459 Joules
  Operating Temperature: 0°C to 40°C (32°F to 104°F)
  Dimensions: 219mm x 171mm x 439mm (8.6? x 6.7? x 17.3?)
  Weight: 21.5kg (47.4 lbs)

  Conclusion

  The APC 2000VA Smart UPS offers reliable power protection for critical equipment. With its LCD display, it provides convenient monitoring of UPS status and power conditions. It also features multiple communication ports for enhanced connectivity and management.

   

  Add to cart

  Quick View
• 

  APC 2000VA Smart UPS, SMC2000I, LCD 230V 1300 Watt 2000VA UPS – Kenya

  KSh146,720.00

  APC Smart UPS C2000 VALCD 230V 1300 Watt 2000VA 

  APC Smart-UPS C 2000VA LCD, 230V with model no. SMC2000I and maximum output capacity of 1300 watts is ideal UPS for top efficiency power back. This UPS is reputed for outstanding quality and great performance.

  APC Smart-UPS is the UPS of choice, trusted for best backup performance and dependable equipment protection. for load below 1300 watts, the APC Smart-UPS C 2000VA (SMC2000I) is what you need.

  APC Smart UPS C2000 VALCD 230V 1300 Watt 2000VA has excellent features to protect your equipment and deliver the power backup you require. With its boost and trim Automatic Voltage Regulation (AVR) function, your equipment gets extended power supply (lower voltage is regulated to supply your equipment).

  They also get protection from over-voltage. Put differently, APC Smart-UPS C 2000VA (SMC2000I) ensures higher application availability by correcting low and high voltage conditions without using the battery.

  APC Smart-UPS C 2000VA LCD UPS specifications
   
  Capacity: 2000VA / 1300 Watts
  Input Voltage: 230V
  Output Voltage: 230V
  UPS Topology: Line Interactive
  Waveform Type: Sine wave
  Transfer Time: 2-6 ms typical
  Input Connection: IEC-320 C14
  Output Connections: 6 x IEC 320 C13
  Battery Type: Sealed lead-acid
  Battery Runtime: Varies depending on the load
  Recharge Time: 3 hours
  Communication Ports: SmartSlot, USB
  Interface Port: RJ-45 10/100 Base-T Ethernet, USB Type-B
  LCD Display: Yes
  Audible Alarms: Battery Backup, Low Battery, Overload, Replace Battery
  Surge Energy Rating: 459 Joules
  Operating Temperature: 0°C to 40°C (32°F to 104°F)
  Dimensions: 219mm x 171mm x 439mm (8.6? x 6.7? x 17.3?)
  Weight: 21.5kg (47.4 lbs)

  Conclusion

  The APC 2000VA Smart UPS offers reliable power protection for critical equipment. With its LCD display, it provides convenient monitoring of UPS status and power conditions. It also features multiple communication ports for enhanced connectivity and management.

   

  Add to cart

  Quick View
• 

  APC 20KVA EASY UPS, E3SUPS20KHB2 3S 20KVA 400V 3:3 10 MIN 3 Phase UPS, E3SUPS20KHB2 – Kenya

  KSh1,900,000.00

    APC 20KVA EASY UPS, E3SUPS20KHB2 3S 20KVA 400V 3:3 10 MIN 3 Phase UPS, E3SUPS20KHB2

  The Schneider Electric Easy UPS 3 Series is an easy-to-install, easy-to-connect, easy-to-use, and easy-to-service 10-200 kVA 3 phase UPS ideal for small and medium businesses, data centers, and other mission critical applications.

  The Schneider Electric Easy UPS 3 Series brings predictability to utility costs by delivering up to 96 percent efficiency in double conversion mode and up to 99 percent efficiency in energy-saving ECO mode, thanks to its advanced product features, competitive specifications, and robust electrical design. It is exceptionally easy to install, connect, operate, maintain, and service, making it ideal for a wide range of small and medium business applications.

  This EcoStruxure™ Ready UPS features a wide operating temperature range and strong overload protection, all in a compact and lightweight footprint. Start-up service* optimizes your system’s performance, quality, and safety. The Easy UPS 3 Series is the easy choice for your business continuity in the data center or electrical room.

  Rolls into position quickly and easily
  Minimal footprint requirement with lightweight, compact form factor
  Straightforward installation
  Input, output, and bypass breakers are included
  Emergency Power Off (EPO) switch is included
  Easy Loop test verifies UPS performance before you connect your load, without the need for a load bank
  Aesthetic design blends well into your installation environment
  On-site start-up** with Schneider Electric Field Service Representatives

  Add to cart

  Quick View
• 

  APC 20KVA EASY UPS, E3SUPS20KHB2 3S 20KVA 400V 3:3 10 MIN 3 Phase UPS, E3SUPS20KHB2 – Kenya

  KSh1,900,000.00

    APC 20KVA EASY UPS, E3SUPS20KHB2 3S 20KVA 400V 3:3 10 MIN 3 Phase UPS, E3SUPS20KHB2

  The Schneider Electric Easy UPS 3 Series is an easy-to-install, easy-to-connect, easy-to-use, and easy-to-service 10-200 kVA 3 phase UPS ideal for small and medium businesses, data centers, and other mission critical applications.

  The Schneider Electric Easy UPS 3 Series brings predictability to utility costs by delivering up to 96 percent efficiency in double conversion mode and up to 99 percent efficiency in energy-saving ECO mode, thanks to its advanced product features, competitive specifications, and robust electrical design. It is exceptionally easy to install, connect, operate, maintain, and service, making it ideal for a wide range of small and medium business applications.

  This EcoStruxure™ Ready UPS features a wide operating temperature range and strong overload protection, all in a compact and lightweight footprint. Start-up service* optimizes your system’s performance, quality, and safety. The Easy UPS 3 Series is the easy choice for your business continuity in the data center or electrical room.

  Rolls into position quickly and easily
  Minimal footprint requirement with lightweight, compact form factor
  Straightforward installation
  Input, output, and bypass breakers are included
  Emergency Power Off (EPO) switch is included
  Easy Loop test verifies UPS performance before you connect your load, without the need for a load bank
  Aesthetic design blends well into your installation environment
  On-site start-up** with Schneider Electric Field Service Representatives

  Add to cart

  Quick View
• 

  APC 2KVA Easy UPS, SMV2000VA ,230V UPS, (SMV2000AI-MSX) – Kenya

  KSh98,000.00

  2KVA APC Easy UPS SMV 2000VA 230V Universal Outlet, SMV2000AI-MS

  2KVA APC Easy UPS SMV 2000VA 230V UPS (SMV2000AI-MS)  is built with resilient sheet metal that rigidly holds and protects critical electrical components. 2KVA APC Easy UPS Automatic Voltage Regulation,

  Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. 2KVA APC Easy UPS SMV 2000VA 230V UPS pure form of sinewave designed to emulate utility power, will support your device upon battery backup.  

  APC SMV 2000 UPS Specifications
  Model: SMV2000AI-MS
  Power Capacity: 2000VA / 1400W
  Input Voltage: 230V
  Output Voltage: 230V
  Topology: Line Interactive
  Universal Outlet Design: Allows easy connectivity with a variety of devices
  Automatic Voltage Regulation (AVR): Provides stable output voltage and protects against voltage fluctuations
  Surge Protection: Safeguards connected equipment from power surges and spikes
  LCD Display: Provides detailed information and status updates for easy monitoring and management
  Hot-Swappable Batteries: Enables uninterrupted operation during battery replacement
  Energy Efficient Design: Helps reduce energy consumption and operating costs.
  Reliable Power Protection: Ensures the continuity of operations and the safety of valuable equipment and data.
  Conclusion
  The APC SMV2000AI-MS is a 2KVA Easy UPS designed to provide reliable power protection for your valuable equipment. With a power capacity of 2000VA and 230V input and output voltage, it ensures a stable power supply to keep your devices running smoothly.
  The UPS features a line interactive topology, offering efficient power conditioning and voltage regulation to protect against fluctuations and maintain optimal performance. The universal outlet design allows easy connectivity to various devices, making it versatile for different applications.

  Add to cart

  Quick View
• 

  APC 2KVA Easy UPS, SMV2000VA ,230V UPS, (SMV2000AI-MSX) – Kenya

  KSh98,000.00

  2KVA APC Easy UPS SMV 2000VA 230V Universal Outlet, SMV2000AI-MS

  2KVA APC Easy UPS SMV 2000VA 230V UPS (SMV2000AI-MS)  is built with resilient sheet metal that rigidly holds and protects critical electrical components. 2KVA APC Easy UPS Automatic Voltage Regulation,

  Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. 2KVA APC Easy UPS SMV 2000VA 230V UPS pure form of sinewave designed to emulate utility power, will support your device upon battery backup.  

  APC SMV 2000 UPS Specifications
  Model: SMV2000AI-MS
  Power Capacity: 2000VA / 1400W
  Input Voltage: 230V
  Output Voltage: 230V
  Topology: Line Interactive
  Universal Outlet Design: Allows easy connectivity with a variety of devices
  Automatic Voltage Regulation (AVR): Provides stable output voltage and protects against voltage fluctuations
  Surge Protection: Safeguards connected equipment from power surges and spikes
  LCD Display: Provides detailed information and status updates for easy monitoring and management
  Hot-Swappable Batteries: Enables uninterrupted operation during battery replacement
  Energy Efficient Design: Helps reduce energy consumption and operating costs.
  Reliable Power Protection: Ensures the continuity of operations and the safety of valuable equipment and data.
  Conclusion
  The APC SMV2000AI-MS is a 2KVA Easy UPS designed to provide reliable power protection for your valuable equipment. With a power capacity of 2000VA and 230V input and output voltage, it ensures a stable power supply to keep your devices running smoothly.
  The UPS features a line interactive topology, offering efficient power conditioning and voltage regulation to protect against fluctuations and maintain optimal performance. The universal outlet design allows easy connectivity to various devices, making it versatile for different applications.

  Add to cart

  Quick View
• 

  APC 3kVA Smart-UPS , SRT3000XLI – Kenya

  KSh345,000.00

  3kVA APC Smart-UPS SRT 3000VA 230V SRT3000XLI 

  3kVA APC Smart-UPS SRT 3000VA 230V SRT3000XLI On Line is capable of supporting loads from 1 kVA to 10 kVA in a rack/tower convertible chassis. 6 kVA, 8 kVA, and 10 kVA models feature unity output power factor enabling them to support power hungry blade servers or heavily loaded equipment racks.

  APC Smart-UPS SRT 3000VA UPS business-critical systems require runtime in hours, not minutes, Smart UPS On Line can be configured with multiple battery packs to meet aggressive runtime demands. APC Smart-UPS SRT 3000VA UPS PowerChute Network Shutdown management software provides unattended graceful shutdown of network operating systems.

  APC Smart-UPS SRT 3000VA UPS Models 5 kVA to 10 kVA include an integrated network management card for remote management. APC Smart-UPS SRT 3000VA UPSSmart UPS On Line family helps to provide value to customers with demanding power conditions, including a very wide input voltage window, extremely tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction.

  APC Smart-UPS SRT 3000VA UPS specifications
  Model: SRT3000XLI
  Power Capacity: 3000 VA / 2700 W
  Input Voltage: 230V
  Output Voltage: 230V
  UPS Topology: Double Conversion Online
  Rack Height: Tower or Rackmount (2U)
  Input Frequency Range: 40-70 Hz (auto sensing)
  Input Connection: Hard Wire 3-wire (1P+N+E).
  Output Connections:
  Hard Wire 3-wire (1P+N+E)
  IEC 320 C19 (2)
  IEC 320 C13 (8)
  Efficiency: Up to 93%
  Crest Factor: 3:1
  Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte
  Typical Recharge Time: 3 hours
  Transfer Time: 0 ms
  Surge Protection: Yes
  Audible Alarm: Battery mode, low battery, overload, fault
  LED Indicators: Online, on battery, replace battery, overload.
  Communication Ports: USB, RS-232, SmartSlot, EPO
  Software: PowerChute Business Edition
  Dimensions (HxWxD): 86 x 432 x 660 mm
  Performance
  Apparent power (VA) 3000 VA
  Effective power (W) 2700 W
  Runtime (50 % load) up to 11.0 min.
  Runtime (100 % load) up to 4.0 min.
  General
  Technology Double conversion (online)
  Battery type VRLA (lead acid)
  Battery life 3 – 5 year(s)
  Duration Renewable
  Network
  SNMP / management Optional
  Physical properties
  Chassis type Tower / rack convertible.
  Dimensions (W x H x D) 85 x 432 x 635 mm
  Weight 32.0 kg
  Product type UPS for servers / network
  Lead time
  Usually in Stock
   
  General
  provided equipment
  CD with software Country-specific detachable power cord Documentation CD Installation guide Removable support feet USB cable Warranty card
   
  Physical
  cable length
  2.44 m
   
  colour
  Black
   
  depth
  63.5 cm
   
  height
  43.2 cm
   
  net weight
  31.3 kg
   
  width
  8.5 cm
   
  Input
  network frequency
  40…70 Hz auto-sensing
   
  plug standard
  BS1363A British IEC 60320 C20 Schuko CEE 7 / EU1-16P
   
  input voltage limits
  100…275 V adjustable (half load) 160…275 V
   
  inputvolt_other
  220 V 240 V
   
  input voltage
  230 V
   
  Output
  rated power in W
  2700 W
   
  Maximum configurable power in W
  2700 W
   
  harmonic distortion
  Less than 2 %
   
  output frequency
  50/60 Hz +/- 3 Hz sync to mains
   
  outputvolt_other
  220 V 240 V
   
  crest factor
  3 : 1
   
  UPS type
  Double conversion online
   
  Wave type
  Sine wave
   
  nb of power socket outlets
  8 IEC 60320 C13 2 IEC Jumpers 2 IEC 60320 C19
   
  bypass type
  Internal bypass (automatic and manual)
   
  output voltage
  230 V
   
  Conformance
  product certifications
  CE EAC RCM VDE
   
  standards
  EN/IEC 62040-1 EN/IEC 62040-2
   
  marking
  CE Mark
   
  Environmental
  ambient air temperature for operation
  0…40 °C
   
  relative humidity
  0…95 % non-condensing
   
  operating altitude
  0…10000 ft
   
  ambient air temperature for storage
  -15…45 °C
   
  storage altitude
  0.00…15240.00 m
   
  acoustic level
  55 dBA
   
  heat dissipation
  703 Btu/h
   
  IP degree of protection
  IP20
   
  Batteries & Runtime
  battery type
  Lead-acid battery
   
  Battery recharge time
  3 h
   
  number of battery replacement quantity
  1
   
  additional information
  Configurable for 220 : 230 or 240 nominal output voltage
   
  liquid value
  0
   
  battery voltage
  96 V
   
  Communications & Management
  free slots
  1
   
  control panel
  Multifunction LCD status and control console
   
  alarm
  Audible and visible alarms prioritized by severity
   
  Emergency power off
  Yes
   
  Surge Protection and Filtering
  Surge energy rate
  340 J
   
  Packing Units
  Package 1 Weight
  36.74 kg
   
  Package 1 Height
  24.6 cm
   
  Package 1 width
  59.9 cm
   
  Package 1 Length
  87.1 cm
   
  Number of Units in Package 3
  6
   
  Offer Sustainability

  Add to cart

  Quick View
• 

  APC 3kVA Smart-UPS , SRT3000XLI – Kenya

  KSh345,000.00

  3kVA APC Smart-UPS SRT 3000VA 230V SRT3000XLI 

  3kVA APC Smart-UPS SRT 3000VA 230V SRT3000XLI On Line is capable of supporting loads from 1 kVA to 10 kVA in a rack/tower convertible chassis. 6 kVA, 8 kVA, and 10 kVA models feature unity output power factor enabling them to support power hungry blade servers or heavily loaded equipment racks.

  APC Smart-UPS SRT 3000VA UPS business-critical systems require runtime in hours, not minutes, Smart UPS On Line can be configured with multiple battery packs to meet aggressive runtime demands. APC Smart-UPS SRT 3000VA UPS PowerChute Network Shutdown management software provides unattended graceful shutdown of network operating systems.

  APC Smart-UPS SRT 3000VA UPS Models 5 kVA to 10 kVA include an integrated network management card for remote management. APC Smart-UPS SRT 3000VA UPSSmart UPS On Line family helps to provide value to customers with demanding power conditions, including a very wide input voltage window, extremely tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction.

  APC Smart-UPS SRT 3000VA UPS specifications
  Model: SRT3000XLI
  Power Capacity: 3000 VA / 2700 W
  Input Voltage: 230V
  Output Voltage: 230V
  UPS Topology: Double Conversion Online
  Rack Height: Tower or Rackmount (2U)
  Input Frequency Range: 40-70 Hz (auto sensing)
  Input Connection: Hard Wire 3-wire (1P+N+E).
  Output Connections:
  Hard Wire 3-wire (1P+N+E)
  IEC 320 C19 (2)
  IEC 320 C13 (8)
  Efficiency: Up to 93%
  Crest Factor: 3:1
  Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte
  Typical Recharge Time: 3 hours
  Transfer Time: 0 ms
  Surge Protection: Yes
  Audible Alarm: Battery mode, low battery, overload, fault
  LED Indicators: Online, on battery, replace battery, overload.
  Communication Ports: USB, RS-232, SmartSlot, EPO
  Software: PowerChute Business Edition
  Dimensions (HxWxD): 86 x 432 x 660 mm
  Performance
  Apparent power (VA) 3000 VA
  Effective power (W) 2700 W
  Runtime (50 % load) up to 11.0 min.
  Runtime (100 % load) up to 4.0 min.
  General
  Technology Double conversion (online)
  Battery type VRLA (lead acid)
  Battery life 3 – 5 year(s)
  Duration Renewable
  Network
  SNMP / management Optional
  Physical properties
  Chassis type Tower / rack convertible.
  Dimensions (W x H x D) 85 x 432 x 635 mm
  Weight 32.0 kg
  Product type UPS for servers / network
  Lead time
  Usually in Stock
   
  General
  provided equipment
  CD with software Country-specific detachable power cord Documentation CD Installation guide Removable support feet USB cable Warranty card
   
  Physical
  cable length
  2.44 m
   
  colour
  Black
   
  depth
  63.5 cm
   
  height
  43.2 cm
   
  net weight
  31.3 kg
   
  width
  8.5 cm
   
  Input
  network frequency
  40…70 Hz auto-sensing
   
  plug standard
  BS1363A British IEC 60320 C20 Schuko CEE 7 / EU1-16P
   
  input voltage limits
  100…275 V adjustable (half load) 160…275 V
   
  inputvolt_other
  220 V 240 V
   
  input voltage
  230 V
   
  Output
  rated power in W
  2700 W
   
  Maximum configurable power in W
  2700 W
   
  harmonic distortion
  Less than 2 %
   
  output frequency
  50/60 Hz +/- 3 Hz sync to mains
   
  outputvolt_other
  220 V 240 V
   
  crest factor
  3 : 1
   
  UPS type
  Double conversion online
   
  Wave type
  Sine wave
   
  nb of power socket outlets
  8 IEC 60320 C13 2 IEC Jumpers 2 IEC 60320 C19
   
  bypass type
  Internal bypass (automatic and manual)
   
  output voltage
  230 V
   
  Conformance
  product certifications
  CE EAC RCM VDE
   
  standards
  EN/IEC 62040-1 EN/IEC 62040-2
   
  marking
  CE Mark
   
  Environmental
  ambient air temperature for operation
  0…40 °C
   
  relative humidity
  0…95 % non-condensing
   
  operating altitude
  0…10000 ft
   
  ambient air temperature for storage
  -15…45 °C
   
  storage altitude
  0.00…15240.00 m
   
  acoustic level
  55 dBA
   
  heat dissipation
  703 Btu/h
   
  IP degree of protection
  IP20
   
  Batteries & Runtime
  battery type
  Lead-acid battery
   
  Battery recharge time
  3 h
   
  number of battery replacement quantity
  1
   
  additional information
  Configurable for 220 : 230 or 240 nominal output voltage
   
  liquid value
  0
   
  battery voltage
  96 V
   
  Communications & Management
  free slots
  1
   
  control panel
  Multifunction LCD status and control console
   
  alarm
  Audible and visible alarms prioritized by severity
   
  Emergency power off
  Yes
   
  Surge Protection and Filtering
  Surge energy rate
  340 J
   
  Packing Units
  Package 1 Weight
  36.74 kg
   
  Package 1 Height
  24.6 cm
   
  Package 1 width
  59.9 cm
   
  Package 1 Length
  87.1 cm
   
  Number of Units in Package 3
  6
   
  Offer Sustainability

  Add to cart

  Quick View
• 

  APC 3kVA Smart-UPS C 3000VA LCD 230V UPS, SMC3000I – Kenya

  KSh290,000.00

  3kVA APC Smart-UPS C 3000VA LCD 230V SMC3000I

  3kVA APC Smart-UPS C 3000VA LCD 230V SMC3000I Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches.

  APC Smart-UPS C 3000VA LCD 230V UPS Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs. 3000VA LCD 230V UPS Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

  APC Smart-UPS provide remote power management options of the UPS over the network. Many do not have NMC embedded. APC Smart-UPS C 3000VA LCD 230V UPS Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

  APC Smart-UPS C 3000VA LCD 230V UPS Specifications
  Power Capacity: 2000VA / 1400W
  Input Voltage: 230V
  Output Voltage: 230V
  Topology: Line Interactive
  Waveform: Sine wave
  LCD Display: Provides detailed information and status updates
  Communication Ports: USB, Serial, SmartSlot for easy integration and management
  Automatic Voltage Regulation (AVR): Adjusts high and low voltages to protect connected equipment
  Surge Protection: Protects against power surges and spikes
  Battery Backup Outlets: Provides reliable backup power during outages
  Surge-Only Outlets: Provides additional surge protection without battery backup
  Battery Runtime: Varies depending on load and battery configuration
  Hot-Swappable Batteries: Allows for easy and uninterrupted battery replacement.
  Intelligent Battery Management: Maximizes battery performance and extends battery life
  Energy Efficiency: Designed for reduced energy consumption and operating costs
  Universal Outlet: Supports a wide range of devices for convenient connectivity
  Reliable Power Protection: Ensures the continuity of operations and protects valuable equipment and data

  Max Configurable Power (Watts)

  2.1kWatts / 3.0kVA

  Output Voltage Distortion

  Less than 5% at full load

  Output Frequency (sync to mains)

  50 Hz

  Topology

  Line Interactive

  Waveform type

  Sine wave
  Input

  Input frequency

  47 – 63 Hz

  Input voltage range for main operations

  180 – 287V

  Input voltage adjustable range for mains operation

  170 – 300V

  Other Input Voltages

  220, 240
  Batteries & Runtime

  Battery type

  Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

  Typical recharge time

  3hour(s)

  Replacement Battery

  APCRBC150

  Expected Battery Life (years)

  3 – 5

  RBC Quantity

  1

  Battery Charge Power (Watts) 

  183Watts

  Battery Volt-Amp-Hour Capacity

  552

  Runtime

  View Runtime Graph
  View Runtime Chart
  Communications & Management

  Interface Port(s)

  USB

  Control panel

  Multi-function LCD status and control console

  Audible Alarm

  Alarm when on battery : distinctive low battery alarm : configurable delays

  Emergency Power Off (EPO)

  —
  Surge Protection and Filtering

  Surge energy rating

  300Joules

  Filtering

  Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
  Physical

  Maximum Height

  435MM, 43.5CM

  Maximum Width

  197MM, 19.7CM

  Maximum Depth

  544MM, 54.4CM

  Net Weight

  43.0KG

  Shipping weight

  51.0KG

  Shipping Height

  762MM, 76.2CM

  Shipping Width

  381MM, 38.1CM

  Shipping Depth

  699MM, 69.9CM

  Color

  Black

  Units per Pallet

  24.0
  Environmental

  Operating Temperature

  0 – 40 °C

  Operating Relative Humidity

  0 – 95 %

  Operating Elevation

  0-3000meters

  Storage Temperature

  -15 – 45 °C

  Storage Relative Humidity

  0 – 95 %

  Storage Elevation

  0-15000meters

  Audible noise at 1 meter from surface of unit

  45.0dBA

  Online thermal dissipation

  135.0BTU/hr
  Conformance

  Approvals

  C-tick, CE, EAC, GOST, SABS, VDE

  Standard warranty

  2 years repair or replace
  Sustainable Offer Status

  RoHS

  Compliant

  REACH

  REACH: Contains SVHCs

  Add to cart

  Quick View
• 

  APC 3kVA Smart-UPS C 3000VA LCD 230V UPS, SMC3000I – Kenya

  KSh290,000.00

  3kVA APC Smart-UPS C 3000VA LCD 230V SMC3000I

  3kVA APC Smart-UPS C 3000VA LCD 230V SMC3000I Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches.

  APC Smart-UPS C 3000VA LCD 230V UPS Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs. 3000VA LCD 230V UPS Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

  APC Smart-UPS provide remote power management options of the UPS over the network. Many do not have NMC embedded. APC Smart-UPS C 3000VA LCD 230V UPS Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

  APC Smart-UPS C 3000VA LCD 230V UPS Specifications
  Power Capacity: 2000VA / 1400W
  Input Voltage: 230V
  Output Voltage: 230V
  Topology: Line Interactive
  Waveform: Sine wave
  LCD Display: Provides detailed information and status updates
  Communication Ports: USB, Serial, SmartSlot for easy integration and management
  Automatic Voltage Regulation (AVR): Adjusts high and low voltages to protect connected equipment
  Surge Protection: Protects against power surges and spikes
  Battery Backup Outlets: Provides reliable backup power during outages
  Surge-Only Outlets: Provides additional surge protection without battery backup
  Battery Runtime: Varies depending on load and battery configuration
  Hot-Swappable Batteries: Allows for easy and uninterrupted battery replacement.
  Intelligent Battery Management: Maximizes battery performance and extends battery life
  Energy Efficiency: Designed for reduced energy consumption and operating costs
  Universal Outlet: Supports a wide range of devices for convenient connectivity
  Reliable Power Protection: Ensures the continuity of operations and protects valuable equipment and data

  Max Configurable Power (Watts)

  2.1kWatts / 3.0kVA

  Output Voltage Distortion

  Less than 5% at full load

  Output Frequency (sync to mains)

  50 Hz

  Topology

  Line Interactive

  Waveform type

  Sine wave
  Input

  Input frequency

  47 – 63 Hz

  Input voltage range for main operations

  180 – 287V

  Input voltage adjustable range for mains operation

  170 – 300V

  Other Input Voltages

  220, 240
  Batteries & Runtime

  Battery type

  Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

  Typical recharge time

  3hour(s)

  Replacement Battery

  APCRBC150

  Expected Battery Life (years)

  3 – 5

  RBC Quantity

  1

  Battery Charge Power (Watts) 

  183Watts

  Battery Volt-Amp-Hour Capacity

  552

  Runtime

  View Runtime Graph
  View Runtime Chart
  Communications & Management

  Interface Port(s)

  USB

  Control panel

  Multi-function LCD status and control console

  Audible Alarm

  Alarm when on battery : distinctive low battery alarm : configurable delays

  Emergency Power Off (EPO)

  —
  Surge Protection and Filtering

  Surge energy rating

  300Joules

  Filtering

  Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
  Physical

  Maximum Height

  435MM, 43.5CM

  Maximum Width

  197MM, 19.7CM

  Maximum Depth

  544MM, 54.4CM

  Net Weight

  43.0KG

  Shipping weight

  51.0KG

  Shipping Height

  762MM, 76.2CM

  Shipping Width

  381MM, 38.1CM

  Shipping Depth

  699MM, 69.9CM

  Color

  Black

  Units per Pallet

  24.0
  Environmental

  Operating Temperature

  0 – 40 °C

  Operating Relative Humidity

  0 – 95 %

  Operating Elevation

  0-3000meters

  Storage Temperature

  -15 – 45 °C

  Storage Relative Humidity

  0 – 95 %

  Storage Elevation

  0-15000meters

  Audible noise at 1 meter from surface of unit

  45.0dBA

  Online thermal dissipation

  135.0BTU/hr
  Conformance

  Approvals

  C-tick, CE, EAC, GOST, SABS, VDE

  Standard warranty

  2 years repair or replace
  Sustainable Offer Status

  RoHS

  Compliant

  REACH

  REACH: Contains SVHCs

  Add to cart

  Quick View
• 

  APC 5000VA Smart-UPS ,SRT-5000VA, 230V 4.5KWatts 5.0kVA UPS – Kenya

  KSh435,375.00

  APC Smart-UPS RT 5000VA 230V 4.5KWatts 5.0kVA 

  APC 5000VA Smart-UPS, SRT-5000VA, is a high-capacity rackmount UPS that provides reliable power protection for critical equipment. With its online double conversion technology, it delivers consistent and clean power to connected devices.

  The UPS features a large battery capacity for extended runtime during power outages and various communication ports for easy management and monitoring. It is suitable for use in data centers, server rooms, and other demanding environments that require a robust power backup solution.

  SRT5000VA UPS Specification
  Capacity: 5000 VA / 4500 Watts
  Input Voltage: 230V
  Output Voltage: 230V
  UPS Topology: Online Double Conversion
  Waveform Type: Sine wave
  Transfer Time: 0 ms (Online mode)
  Nominal Input/Output Frequency: 50/60 Hz
  Input Connection: Hardwire
  Output Connections: 8 x IEC 320 C13, 2 x IEC 320 C19, 3 x IEC Jumpers
  Battery Type: Maintenance-free sealed lead-acid battery with suspended electrolyte
  Typical Recharge Time: 3 hours
  Communication Ports: USB, Serial, SmartSlot, Ethernet
  LCD Display: Provides real-time UPS status and parameters
  Audible Alarms: Battery Backup, Low Battery, Overload, Bypass, Fault
  Surge Energy Rating: 480 Joules
  Operating Temperature: 0°C to 40°C (32°F to 104°F)
  Dimensions (H x W x D): 432 mm x 263 mm x 719 mm (17? x 10.4? x 28.3?)
  Weight: 78.64 kg (173.4 lbs)

  Conclusion

  The APC 5000VA Smart-UPS, SRT-5000VA, is a high-capacity rackmount UPS that provides reliable power protection for critical equipment. With its online double conversion technology, it delivers consistent and clean power to connected devices.

  Add to cart

  Quick View
• 

  APC 5000VA Smart-UPS ,SRT-5000VA, 230V 4.5KWatts 5.0kVA UPS – Kenya

  KSh435,375.00

  APC Smart-UPS RT 5000VA 230V 4.5KWatts 5.0kVA 

  APC 5000VA Smart-UPS, SRT-5000VA, is a high-capacity rackmount UPS that provides reliable power protection for critical equipment. With its online double conversion technology, it delivers consistent and clean power to connected devices.

  The UPS features a large battery capacity for extended runtime during power outages and various communication ports for easy management and monitoring. It is suitable for use in data centers, server rooms, and other demanding environments that require a robust power backup solution.

  SRT5000VA UPS Specification
  Capacity: 5000 VA / 4500 Watts
  Input Voltage: 230V
  Output Voltage: 230V
  UPS Topology: Online Double Conversion
  Waveform Type: Sine wave
  Transfer Time: 0 ms (Online mode)
  Nominal Input/Output Frequency: 50/60 Hz
  Input Connection: Hardwire
  Output Connections: 8 x IEC 320 C13, 2 x IEC 320 C19, 3 x IEC Jumpers
  Battery Type: Maintenance-free sealed lead-acid battery with suspended electrolyte
  Typical Recharge Time: 3 hours
  Communication Ports: USB, Serial, SmartSlot, Ethernet
  LCD Display: Provides real-time UPS status and parameters
  Audible Alarms: Battery Backup, Low Battery, Overload, Bypass, Fault
  Surge Energy Rating: 480 Joules
  Operating Temperature: 0°C to 40°C (32°F to 104°F)
  Dimensions (H x W x D): 432 mm x 263 mm x 719 mm (17? x 10.4? x 28.3?)
  Weight: 78.64 kg (173.4 lbs)

  Conclusion

  The APC 5000VA Smart-UPS, SRT-5000VA, is a high-capacity rackmount UPS that provides reliable power protection for critical equipment. With its online double conversion technology, it delivers consistent and clean power to connected devices.

  Add to cart

  Quick View
• 

  APC 5KVA 230V Rackmount UPS , SUA5000RMI5U, Smart-UPS – Kenya

  KSh620,000.00

  5KVA APC Smart-UPS 5000VA 230V Rackmount SUA5000RMI5U UPS 

  5KVA APC Smart-UPS 5000VA 230V Rackmount SUA5000RMI5U UPS protects your data by supplying reliable, network-grade power in either traditional Tower or Rack-optimized form factors for space constrained business-critical applications.

  APC Smart-UPS 5000VA UPS Award winning APC Smart-UPS is the perfect UPS for protecting business critical fileservers (Intel or UNIX based), minicomputers, network switches and hubs, Point of Sale, retail/bank back office and ATMs.

  APC Smart-UPS 5000VA Rack Mount versions are the choice for rack optimized servers, server appliances, blade servers, other blade devices and rack-mounted network switches and hubs.

  5KVA APC Smart-UPS 5000VA 230V Rackmount specifications
  Model: APC SUA5000RMI5U
  Capacity: 5KVA / 4.5KW
  Input Voltage: 230V
  Output Voltage: 230V
  Rackmount Design: 5U height
  Topology: Line Interactive
  Waveform Type: Sine wave
  Output Connections: 8x IEC 320 C13, 2x IEC 320 C19
  Input Connections: IEC 320 C20
  Transfer Time: 4 ms typical
  Nominal Input/Output Frequency: 50/60 Hz
  Communication Ports: USB, Serial, SmartSlot
  LCD Display: Provides real-time status information.
  Audible Alarm: Alerts for various UPS conditions
  Battery Type: Sealed Lead-Acid
  Battery Runtime: Varies based on load and battery configuration
  Battery Recharge Time: 3 hours to 90% capacity
  Surge Energy Rating: 645 Joules
  Overload Protection: Circuit breakers
  Automatic Voltage Regulation (AVR): Adjusts high and low voltage fluctuations
  Communication and Management: PowerChute Software, SNMP, Telnet, SSH, Web browser, Modbus TCP
  Features
  UPS topology Line-Interactive
  UPS topology Line-Interactive
  Output power capacity 5000
  Output power 4000
  Waveform Sine
  Input operation voltage (min) 151
  Input operation voltage (max) 302
  Input frequency 50/60
  Output operation voltage (min) 220
  Output operation voltage (max) 240
  Output frequency regulation 47 – 53
  Automatic Voltage Regulation (AVR) Yes
  Surge energy rating 480
  Hold time (min) 2
  Hold time (max) 4
  Number of output phases 1
  Efficiency 96
  Noise level 53
  Surge protection Yes
  Audible alarm(s) Yes
  Auto-restart Yes
  Ports & interfaces
  AC outlet types C13 coupler,C19 coupler
  AC outlets quantity 10
  Number of output IEC jumpers 4
  Serial ports quantity 1
  Battery
  Battery technology Sealed Lead Acid (VRLA)
  Battery technology Sealed Lead Acid (VRLA)
  Battery capacity 1632
  Typical backup time at full load 9.4
  Typical backup time at half load 26.7
  Battery life (max) 5
  Battery recharge time 3
  Hot-swap battery Yes
  Automatic battery test Yes
  Cold start Yes
  Battery replacement alarms LED
  Design
  Form factor Rackmount/Tower
  Rack capacity 5U
  Product colour Black
  LED indicators Battery replacement
  RoHS compliance Yes
  Certification C-tick, CE, EN 50091-1, EN 50091-2, GOST, GS Mark, VDE, REACH, PEP, EOLI
  Operational conditions
  Operating temperature (T-T) 0 – 40
  Storage temperature (T-T) -15 – 45
  Operating relative humidity (H-H) 0 – 95
  Storage relative humidity (H-H) 0 – 95
  Operating altitude 0 – 9000
  Non-operating altitude 0 – 15000
  Weight & dimensions
  Width 483
  Depth 660
  Height 222
  Weight 97730
  Packaging data
  Rack mount kit Yes
  Cables included RS-232
  Manual Yes
  Quick installation guide Yes
  Software CD Yes
  Package width 610
  Package depth 762
  Package height 635
  Package weight 106820
  Logistics data
  Quantity per pallet 4
  Quantity per master (outer) case 1
  Other features
  Battery type VRLA
  Output connections 8 – IEC 320 C13 2 – IEC 320 C19 6 – IEC Jmpr
  Input connection type Hard Wire 3-wire
  Dimensions (WxDxH) 483 x 660 x 222
  Nominal output voltage 230
  Output voltage note 230-240 V
  Nominal input voltage 230
   

  Add to cart

  Quick View
• 

  APC 5KVA 230V Rackmount UPS , SUA5000RMI5U, Smart-UPS – Kenya

  KSh620,000.00

  5KVA APC Smart-UPS 5000VA 230V Rackmount SUA5000RMI5U UPS 

  5KVA APC Smart-UPS 5000VA 230V Rackmount SUA5000RMI5U UPS protects your data by supplying reliable, network-grade power in either traditional Tower or Rack-optimized form factors for space constrained business-critical applications.

  APC Smart-UPS 5000VA UPS Award winning APC Smart-UPS is the perfect UPS for protecting business critical fileservers (Intel or UNIX based), minicomputers, network switches and hubs, Point of Sale, retail/bank back office and ATMs.

  APC Smart-UPS 5000VA Rack Mount versions are the choice for rack optimized servers, server appliances, blade servers, other blade devices and rack-mounted network switches and hubs.

  5KVA APC Smart-UPS 5000VA 230V Rackmount specifications
  Model: APC SUA5000RMI5U
  Capacity: 5KVA / 4.5KW
  Input Voltage: 230V
  Output Voltage: 230V
  Rackmount Design: 5U height
  Topology: Line Interactive
  Waveform Type: Sine wave
  Output Connections: 8x IEC 320 C13, 2x IEC 320 C19
  Input Connections: IEC 320 C20
  Transfer Time: 4 ms typical
  Nominal Input/Output Frequency: 50/60 Hz
  Communication Ports: USB, Serial, SmartSlot
  LCD Display: Provides real-time status information.
  Audible Alarm: Alerts for various UPS conditions
  Battery Type: Sealed Lead-Acid
  Battery Runtime: Varies based on load and battery configuration
  Battery Recharge Time: 3 hours to 90% capacity
  Surge Energy Rating: 645 Joules
  Overload Protection: Circuit breakers
  Automatic Voltage Regulation (AVR): Adjusts high and low voltage fluctuations
  Communication and Management: PowerChute Software, SNMP, Telnet, SSH, Web browser, Modbus TCP
  Features
  UPS topology Line-Interactive
  UPS topology Line-Interactive
  Output power capacity 5000
  Output power 4000
  Waveform Sine
  Input operation voltage (min) 151
  Input operation voltage (max) 302
  Input frequency 50/60
  Output operation voltage (min) 220
  Output operation voltage (max) 240
  Output frequency regulation 47 – 53
  Automatic Voltage Regulation (AVR) Yes
  Surge energy rating 480
  Hold time (min) 2
  Hold time (max) 4
  Number of output phases 1
  Efficiency 96
  Noise level 53
  Surge protection Yes
  Audible alarm(s) Yes
  Auto-restart Yes
  Ports & interfaces
  AC outlet types C13 coupler,C19 coupler
  AC outlets quantity 10
  Number of output IEC jumpers 4
  Serial ports quantity 1
  Battery
  Battery technology Sealed Lead Acid (VRLA)
  Battery technology Sealed Lead Acid (VRLA)
  Battery capacity 1632
  Typical backup time at full load 9.4
  Typical backup time at half load 26.7
  Battery life (max) 5
  Battery recharge time 3
  Hot-swap battery Yes
  Automatic battery test Yes
  Cold start Yes
  Battery replacement alarms LED
  Design
  Form factor Rackmount/Tower
  Rack capacity 5U
  Product colour Black
  LED indicators Battery replacement
  RoHS compliance Yes
  Certification C-tick, CE, EN 50091-1, EN 50091-2, GOST, GS Mark, VDE, REACH, PEP, EOLI
  Operational conditions
  Operating temperature (T-T) 0 – 40
  Storage temperature (T-T) -15 – 45
  Operating relative humidity (H-H) 0 – 95
  Storage relative humidity (H-H) 0 – 95
  Operating altitude 0 – 9000
  Non-operating altitude 0 – 15000
  Weight & dimensions
  Width 483
  Depth 660
  Height 222
  Weight 97730
  Packaging data
  Rack mount kit Yes
  Cables included RS-232
  Manual Yes
  Quick installation guide Yes
  Software CD Yes
  Package width 610
  Package depth 762
  Package height 635
  Package weight 106820
  Logistics data
  Quantity per pallet 4
  Quantity per master (outer) case 1
  Other features
  Battery type VRLA
  Output connections 8 – IEC 320 C13 2 – IEC 320 C19 6 – IEC Jmpr
  Input connection type Hard Wire 3-wire
  Dimensions (WxDxH) 483 x 660 x 222
  Nominal output voltage 230
  Output voltage note 230-240 V
  Nominal input voltage 230
   

  Add to cart

  Quick View
• 

  APC 650VA 230V Back-UPS, with Universal Sockets ,BV650I-MSX – Kenya

  KSh15,500.00

  APC 650VA 230V Back-UPS with Universal Sockets (BV650I-MSX) 

  APC 650VA 230V Back-UPS with Universal Sockets (BV650I-MSX) Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers. APC 650VA 230V Back-UPS Protect equipment with input transformer blocks without blocking access to other receptacles.

  650VA 230V Back-UPS is Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. APC 650VA 230V Back-UPS  Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

  APC 650VA 230V Back-UPS Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. 650VA 230V Back-UPS Maximizes battery performance, life, and reliability through intelligent, precision charging.

  APC 650VA 230V Back-UPS Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. APC 650VA 230V Back-UPS with Universal Sockets Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

  APC 650VA 230V Back-UPS Protect equipment with input transformer blocks without blocking access to other receptacles. APC 650VA 230V Back-UPS Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.  

  APC 650VA 230V Back-UPS specifications
  Capacity: 650VA/375W
  Input voltage: 230V
  Output voltage: 230V
  Output connections: Universal Outlet x 2
  Input connection: IEC-320 C14
  Output waveform: Stepped approximation to a sinewave
  Transfer time: 6ms typical, 10ms maximum.
  Surge energy rating: 273 Joules
  Battery type: Sealed, maintenance-free lead-acid
  Typical recharge time: 6 hours
  Backup runtime: Up to 10 minutes at half load, 3 minutes at full load
  Audible noise: Less than 40 dBA at 1 meter distance
  Operating temperature: 0°C to 40°C
  Dimensions (H x W x D): 161 x 123 x 190 mm
  Weight: 4.5 kg
  Main
  acoustic level
  40 dBA
   
  battery curve
  A
   
  battery type
  Lead-acid battery
   
  curve equation
  Efficiency
   
  curve fixed loss
  0.0265
   
  curve load maximum
  100 %
   
  curve load minimum
  3 %
   
  curve proportional loss
  0
   
  curve square loss
  0.011
   
  curve test cond ID
  Curve fit to measured efficiency data. All measurements taken in normal operating mode, at typical environmental conditions, with nominal electrical input and balanced resistive load (PF = 1.0) output.
   
  curve X-axis maximum
  100 %
   
  curve X-axis minimum
  0 %
   
  curve X-axis title
  Load
   
  curve X-axis units
  Percentage
   
  curve Y-axis maximum
  100 %
   
  curve Y-axis minimum
  50 %
   
  curve Y-axis title
  Efficiency
   
  curve Y-axis units
  Percentage
   
  equipment protection policy
  No EPP for ASEAN
   
  extended runtime
  0
   
  maximum input current
  5 A
   
  Maximum configurable power in VA
  650 VA
   
  Maximum configurable power in W
  325 W
   
  input protection type
  GL fuse
   
  liquid value
  0
   
  mounting mode
  Not rack-mountable
   
  mounting position
  Vertical
   
  mounting preference
  No preference
   
  number of battery filled slots
  1
   
  number of battery free slots
  0
   
  Battery recharge time
  4 h
   
  cable length
  1.22 m
   
  cos phi
  0.5
   
  depth
  30 cm
   
  height
  14.1 cm
   
  number of cables
  1
   
  Number of power module filled slots
  0
   
  Number of power module free slots
  0
   
  net weight
  4.33 kg
   
  rated power in VA
  650 VA
   
  rated power in W
  325 W
   
  Surge energy rate
  160 J
   
  switching current capacity
  5 A
   
  Number of tare power
  12 W
   
  width
  10.1 cm
   
  operating altitude
  0…6561 ft
   
  ambient air temperature for operation
  0…40 °C
   
  battery life
  2…4 year(s)
   
  ambient air temperature for storage
  -20…50 °C
   
  storage altitude
  0.00…14999.82 m
   
  Transfer time
  4 ms typical : 6 ms maximum
   
  UPS size
  WS
   
  UPS type
  Line interactive
   
  Wave type
  Stepped approximation to a sinewave
   
  graph display
  2
   
  redundant
  No
   
  runtime at 100W
  00:17:00
   
  runtime at 200W
  00:04:19
   
  runtime at 300W
  00:00:11
   
  runtime at 50W
  00:41:00
   
  show note OP temperature
  No
   
  two post mountable
  0
   
   
  No
   
  colour
  Black
   
  full load runtime
  00:00:01 325 W
   
  half load runtime
  00:07:15 162.5 W
   
  input voltage
  230 V
   
  input voltage limits
  180…270 V
   
  battery charger power
  19 W rated
   
  nb of power socket outlets
  2 universal receptacle
   
  network frequency
  50/60 Hz +/- 3 Hz auto-sensing
   
  output voltage
  230 V
   
  plug standard
  NEMA 5-15P
   
  provided equipment
  Installation guide
   
  relative humidity
  0…95 %
   
  Battery power in VAH
  75 VAh runtime
   
  product web sub-family
  Entry level
   
  Output
  output frequency
  50/60 Hz +/- 1 Hz sync to mains
   
  Communications & Management
  control panel
  LED Status display with on line : on battery
   
  alarm
  Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
   
  Packing Units
  Package 1 Weight
  4.58 kg
   
  Package 1 Height
  22.3 cm
   
  Package 1 width
  14.3 cm
   
  Package 1 Length
  34.7 cm
   
  SCC14
  10731304318184
   
  Number of Units in Package 2
  4
   
  Package 2 Weight
  18.50 kg
   
  Package 2 Height
  228.60 mm
   
  Package 2 width
  355.60 mm
   
  Package 2 Length
  584.20 mm
   
  Number of Units in Package 3
  80
   
  Package 3 Weight
  405 kg
   
  Package 3 Height
  114 cm
   
  Package 3 width
  100 cm
   
  Package 3 Length
  120 cm
   
  Pallet unit layers
  20
   
  Pallet layers
  4
   
  Offer Sustainability
  Sustainable offer status
  Green Premium product
   
  REACh free of SVHC
  Yes
   
  EU RoHS Directive
  Compliant EU RoHS Declaration
   
  Mercury free
  Yes
   
  RoHS exemption information
  Yes
   
  WEEE
  The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
   
  Optimized Energy Efficiency
  Energy efficient product

  Add to cart

  Quick View
• 

  APC 650VA 230V Back-UPS, with Universal Sockets ,BV650I-MSX – Kenya

  KSh15,500.00

  APC 650VA 230V Back-UPS with Universal Sockets (BV650I-MSX) 

  APC 650VA 230V Back-UPS with Universal Sockets (BV650I-MSX) Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers. APC 650VA 230V Back-UPS Protect equipment with input transformer blocks without blocking access to other receptacles.

  650VA 230V Back-UPS is Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. APC 650VA 230V Back-UPS  Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

  APC 650VA 230V Back-UPS Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. 650VA 230V Back-UPS Maximizes battery performance, life, and reliability through intelligent, precision charging.

  APC 650VA 230V Back-UPS Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. APC 650VA 230V Back-UPS with Universal Sockets Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

  APC 650VA 230V Back-UPS Protect equipment with input transformer blocks without blocking access to other receptacles. APC 650VA 230V Back-UPS Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.  

  APC 650VA 230V Back-UPS specifications
  Capacity: 650VA/375W
  Input voltage: 230V
  Output voltage: 230V
  Output connections: Universal Outlet x 2
  Input connection: IEC-320 C14
  Output waveform: Stepped approximation to a sinewave
  Transfer time: 6ms typical, 10ms maximum.
  Surge energy rating: 273 Joules
  Battery type: Sealed, maintenance-free lead-acid
  Typical recharge time: 6 hours
  Backup runtime: Up to 10 minutes at half load, 3 minutes at full load
  Audible noise: Less than 40 dBA at 1 meter distance
  Operating temperature: 0°C to 40°C
  Dimensions (H x W x D): 161 x 123 x 190 mm
  Weight: 4.5 kg
  Main
  acoustic level
  40 dBA
   
  battery curve
  A
   
  battery type
  Lead-acid battery
   
  curve equation
  Efficiency
   
  curve fixed loss
  0.0265
   
  curve load maximum
  100 %
   
  curve load minimum
  3 %
   
  curve proportional loss
  0
   
  curve square loss
  0.011
   
  curve test cond ID
  Curve fit to measured efficiency data. All measurements taken in normal operating mode, at typical environmental conditions, with nominal electrical input and balanced resistive load (PF = 1.0) output.
   
  curve X-axis maximum
  100 %
   
  curve X-axis minimum
  0 %
   
  curve X-axis title
  Load
   
  curve X-axis units
  Percentage
   
  curve Y-axis maximum
  100 %
   
  curve Y-axis minimum
  50 %
   
  curve Y-axis title
  Efficiency
   
  curve Y-axis units
  Percentage
   
  equipment protection policy
  No EPP for ASEAN
   
  extended runtime
  0
   
  maximum input current
  5 A
   
  Maximum configurable power in VA
  650 VA
   
  Maximum configurable power in W
  325 W
   
  input protection type
  GL fuse
   
  liquid value
  0
   
  mounting mode
  Not rack-mountable
   
  mounting position
  Vertical
   
  mounting preference
  No preference
   
  number of battery filled slots
  1
   
  number of battery free slots
  0
   
  Battery recharge time
  4 h
   
  cable length
  1.22 m
   
  cos phi
  0.5
   
  depth
  30 cm
   
  height
  14.1 cm
   
  number of cables
  1
   
  Number of power module filled slots
  0
   
  Number of power module free slots
  0
   
  net weight
  4.33 kg
   
  rated power in VA
  650 VA
   
  rated power in W
  325 W
   
  Surge energy rate
  160 J
   
  switching current capacity
  5 A
   
  Number of tare power
  12 W
   
  width
  10.1 cm
   
  operating altitude
  0…6561 ft
   
  ambient air temperature for operation
  0…40 °C
   
  battery life
  2…4 year(s)
   
  ambient air temperature for storage
  -20…50 °C
   
  storage altitude
  0.00…14999.82 m
   
  Transfer time
  4 ms typical : 6 ms maximum
   
  UPS size
  WS
   
  UPS type
  Line interactive
   
  Wave type
  Stepped approximation to a sinewave
   
  graph display
  2
   
  redundant
  No
   
  runtime at 100W
  00:17:00
   
  runtime at 200W
  00:04:19
   
  runtime at 300W
  00:00:11
   
  runtime at 50W
  00:41:00
   
  show note OP temperature
  No
   
  two post mountable
  0
   
   
  No
   
  colour
  Black
   
  full load runtime
  00:00:01 325 W
   
  half load runtime
  00:07:15 162.5 W
   
  input voltage
  230 V
   
  input voltage limits
  180…270 V
   
  battery charger power
  19 W rated
   
  nb of power socket outlets
  2 universal receptacle
   
  network frequency
  50/60 Hz +/- 3 Hz auto-sensing
   
  output voltage
  230 V
   
  plug standard
  NEMA 5-15P
   
  provided equipment
  Installation guide
   
  relative humidity
  0…95 %
   
  Battery power in VAH
  75 VAh runtime
   
  product web sub-family
  Entry level
   
  Output
  output frequency
  50/60 Hz +/- 1 Hz sync to mains
   
  Communications & Management
  control panel
  LED Status display with on line : on battery
   
  alarm
  Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
   
  Packing Units
  Package 1 Weight
  4.58 kg
   
  Package 1 Height
  22.3 cm
   
  Package 1 width
  14.3 cm
   
  Package 1 Length
  34.7 cm
   
  SCC14
  10731304318184
   
  Number of Units in Package 2
  4
   
  Package 2 Weight
  18.50 kg
   
  Package 2 Height
  228.60 mm
   
  Package 2 width
  355.60 mm
   
  Package 2 Length
  584.20 mm
   
  Number of Units in Package 3
  80
   
  Package 3 Weight
  405 kg
   
  Package 3 Height
  114 cm
   
  Package 3 width
  100 cm
   
  Package 3 Length
  120 cm
   
  Pallet unit layers
  20
   
  Pallet layers
  4
   
  Offer Sustainability
  Sustainable offer status
  Green Premium product
   
  REACh free of SVHC
  Yes
   
  EU RoHS Directive
  Compliant EU RoHS Declaration
   
  Mercury free
  Yes
   
  RoHS exemption information
  Yes
   
  WEEE
  The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
   
  Optimized Energy Efficiency
  Energy efficient product

  Add to cart

  Quick View
• 

  APC 650VA Easy UPS, battery backup UPS, BVS6501 – Kenya

  KSh11,500.00

   650VA Easy UPS-battery backup UPS BVS6501 

   650VA Easy UPS-battery backup UPS BVS6501 from the leading UPS dealer in Nairobi kenya, buy online Schneider 650VA Easy UPS-battery backup UPS BVS6501 and have it delivered at your doorstep.

  Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

  Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.  

  Easy UPS Features & Benefits

  Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

  Audible alarms  –Provides notification of changing utility power and UPS power conditions

  LED Indicators Provide easy-to-read status of the unit and utility power conditions.

  Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.

  Cold-start capable Provides temporary battery power when the utility power is out.

  Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

  APC 650VA Specifications
  Capacity: 650VA/360W
  Input voltage: 230V
  Output voltage: 230V
  Output connections: 3x IEC 320 C13
  Input connection: IEC-320 C14
  Output waveform: Stepped approximation to a sinewave
  Transfer time: 6ms typical, 10ms maximum
  Surge energy rating: 273 Joules
  Battery type: Sealed, maintenance-free lead-acid
  Typical recharge time: 6 hours
  Backup runtime: Up to 12 minutes at half load, 3 minutes at full load
  Audible noise: Less than 45 dBA at 1 meter distance
  Operating temperature: 0°C to 40°C
  Dimensions (H x W x D): 161 x 123 x 190 mm
  Weight: 4.9 kg

  Conclusion

  The APC 650VA Easy UPS (BVS6501) is a compact and reliable battery backup UPS designed to provide backup power during outages and protect connected equipment from power disturbances. With a capacity of 650VA and 360W, it offers sufficient power to support critical devices such as computers, routers, and small electronics. The UPS features three IEC 320 C13 output connections, allowing you to connect multiple devices simultaneously.

   
   
   
  Overview
  Lead time
  Usually in Stock
   
  General
  provided equipment
  User manual
   
  Number of power module free slots
  0
   
  Number of power module filled slots
  0
   
  redundant
  No
   
  UPS size
  WS
   
  Physical
  cable length
  1.50 m
   
  colour
  Black
   
  depth
  30.5 cm
   
  height
  9.25 cm
   
  mounting preference
  No preference
   
  net weight
  4.5 kg
   
  mounting mode
  Not rack-mountable
   
  two post mountable
  0
   
  USB compatible
  No
   
  width
  16.5 cm
   
  Input
  network frequency
  50/60 Hz +/- 5 Hz auto-sensing
   
  plug standard
  BS1363A British
   
  input voltage limits
  170…280 V
   
  number of cables
  1
   
  input voltage
  230 V
   
  Output
  rated power in W
  375 W
   
  Maximum configurable power in W
  375 W
   
  output frequency
  50/60 Hz +/- 1 Hz unsynchronised
   
  UPS type
  Line interactive
   
  Wave type
  Stepped approximation to a sinewave
   
  nb of power socket outlets
  4 universal receptacle
   
  curve equation
  Efficiency
   
  curve fixed loss
  0.0294
   
  curve load maximum
  100 %
   
  curve load minimum
  3 %
   
  curve proportional loss
  0
   
  curve square loss
  0.0021
   
  curve X-axis maximum
  100 %
   
  curve test cond ID
  Curve fit of data measured in accordance with the ENERGY STAR Test Method for Uninterruptible Power Supplies. All measurements taken in normal mode(s), at typical environmental conditions, with 230V/50Hz electrical input and balanced resistive load (PF = 1.0) output.
   
  curve X-axis minimum
  0 %
   
  curve X-axis title
  Load
   
  curve X-axis units
  Percentage
   
  curve Y-axis maximum
  100 %
   
  curve Y-axis minimum
  50 %
   
  curve Y-axis title
  Efficiency
   
  curve Y-axis units
  Percentage
   
  graph display
  1
   
  output voltage
  230 V
   
  Maximum configurable power in VA
  650 VA
   
  rated power in VA
  650 VA
   
  Transfer time
  6 ms typical : 10 ms maximum
   
  Conformance
  product certifications
  CE

  Add to cart

  Quick View
• 

  APC 650VA Easy UPS, battery backup UPS, BVS6501 – Kenya

  KSh11,500.00

   650VA Easy UPS-battery backup UPS BVS6501 

   650VA Easy UPS-battery backup UPS BVS6501 from the leading UPS dealer in Nairobi kenya, buy online Schneider 650VA Easy UPS-battery backup UPS BVS6501 and have it delivered at your doorstep.

  Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

  Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.  

  Easy UPS Features & Benefits

  Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

  Audible alarms  –Provides notification of changing utility power and UPS power conditions

  LED Indicators Provide easy-to-read status of the unit and utility power conditions.

  Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.

  Cold-start capable Provides temporary battery power when the utility power is out.

  Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

  APC 650VA Specifications
  Capacity: 650VA/360W
  Input voltage: 230V
  Output voltage: 230V
  Output connections: 3x IEC 320 C13
  Input connection: IEC-320 C14
  Output waveform: Stepped approximation to a sinewave
  Transfer time: 6ms typical, 10ms maximum
  Surge energy rating: 273 Joules
  Battery type: Sealed, maintenance-free lead-acid
  Typical recharge time: 6 hours
  Backup runtime: Up to 12 minutes at half load, 3 minutes at full load
  Audible noise: Less than 45 dBA at 1 meter distance
  Operating temperature: 0°C to 40°C
  Dimensions (H x W x D): 161 x 123 x 190 mm
  Weight: 4.9 kg

  Conclusion

  The APC 650VA Easy UPS (BVS6501) is a compact and reliable battery backup UPS designed to provide backup power during outages and protect connected equipment from power disturbances. With a capacity of 650VA and 360W, it offers sufficient power to support critical devices such as computers, routers, and small electronics. The UPS features three IEC 320 C13 output connections, allowing you to connect multiple devices simultaneously.

   
   
   
  Overview
  Lead time
  Usually in Stock
   
  General
  provided equipment
  User manual
   
  Number of power module free slots
  0
   
  Number of power module filled slots
  0
   
  redundant
  No
   
  UPS size
  WS
   
  Physical
  cable length
  1.50 m
   
  colour
  Black
   
  depth
  30.5 cm
   
  height
  9.25 cm
   
  mounting preference
  No preference
   
  net weight
  4.5 kg
   
  mounting mode
  Not rack-mountable
   
  two post mountable
  0
   
  USB compatible
  No
   
  width
  16.5 cm
   
  Input
  network frequency
  50/60 Hz +/- 5 Hz auto-sensing
   
  plug standard
  BS1363A British
   
  input voltage limits
  170…280 V
   
  number of cables
  1
   
  input voltage
  230 V
   
  Output
  rated power in W
  375 W
   
  Maximum configurable power in W
  375 W
   
  output frequency
  50/60 Hz +/- 1 Hz unsynchronised
   
  UPS type
  Line interactive
   
  Wave type
  Stepped approximation to a sinewave
   
  nb of power socket outlets
  4 universal receptacle
   
  curve equation
  Efficiency
   
  curve fixed loss
  0.0294
   
  curve load maximum
  100 %
   
  curve load minimum
  3 %
   
  curve proportional loss
  0
   
  curve square loss
  0.0021
   
  curve X-axis maximum
  100 %
   
  curve test cond ID
  Curve fit of data measured in accordance with the ENERGY STAR Test Method for Uninterruptible Power Supplies. All measurements taken in normal mode(s), at typical environmental conditions, with 230V/50Hz electrical input and balanced resistive load (PF = 1.0) output.
   
  curve X-axis minimum
  0 %
   
  curve X-axis title
  Load
   
  curve X-axis units
  Percentage
   
  curve Y-axis maximum
  100 %
   
  curve Y-axis minimum
  50 %
   
  curve Y-axis title
  Efficiency
   
  curve Y-axis units
  Percentage
   
  graph display
  1
   
  output voltage
  230 V
   
  Maximum configurable power in VA
  650 VA
   
  rated power in VA
  650 VA
   
  Transfer time
  6 ms typical : 10 ms maximum
   
  Conformance
  product certifications
  CE

  Add to cart

  Quick View
• 

  APC 700VA Backup UPS, 700VA 230V AVR IEC Sockets 360Watts/700VA UPS, BX700UI – Kenya

  KSh13,935.00

  APC Back-UPS 700VA 230V AVR IEC Sockets 390Watts/700VA 

  APC Back-UPS 700VA 230V AVR IEC Sockets 390Watts/700VA powers your computer and electronic equipment during storms and outages. The BX700UI features Automatic Voltage Regulation (AVR).

  This feature instantly adjusts high and low voltage fluctuations to safe levels for connected electronics, saving battery power for when you need it most during storms and outages. Equipped with 4 IEC sockets, the 700 keeps your desktop computer, monitor or other critical devices (router, modem, television, etc.) running when the power goes out.

  Specifically designed for electronic equipment in harsh power environments, the Back-UPS 700 maximizes productivity and work efficiency while providing critical power during emergencies.

  APC Back-UPS 700VA UPS Specifications
  Capacity: 700VA / 390 Watts
  Input Voltage: 230V
  Output Voltage: 230V
  UPS Topology: Standby
  Waveform Type: Stepped approximation to a sinewave
  Transfer Time: 8 ms typical
  Input Connections: IEC-320 C14
  Output Connections: 4 x IEC 320 C13
  Battery Type: Sealed lead-acid
  Battery Runtime: Varies depending on the load
  Recharge Time: 8 hours
  Communication Ports: USB
  Interface Port: RJ-45 10/100 Base-T Ethernet
  Audible Alarms: On Battery, Low Battery, Overload, Replace Battery
  Surge Energy Rating: 273 Joules
  Operating Temperature: 0°C to 40°C (32°F to 104°F)
  Dimensions: 215mm x 130mm x 336mm (8.46? x 5.12? x 13.23?)
  Weight: 7.38 kg (16.26 lbs)
  Output
  Max Configurable Power (Watts)- 390Watts / 700VA
  Output Frequency (sync to mains)  50/60 Hz +/-1 Hz
  Topology -Line Interactive
  Waveform type- Stepped approximation to a sinewave
  Transfer Time – 4ms typical
  Input
  Input frequency – 50/60 Hz +/- 3 Hz (auto sensing)
  Input voltage range for main operations – 140 – 300V
  Number of Power Cords -1
  Batteries & Runtime
  Battery type  – Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
  Typical recharge time – 6hour(s)
  Replacement Battery – BE650G2-GR
  Expected Battery Life (years) – 3 – 5
  RBC Quantity – 1
  Battery Volt-Amp-Hour Capacity – 84
  Runtime
   
   
  Communications & Management
  Interface Port(s) – USB
  Control panel – LED status display with On Line : On Battery : Replace Battery and Overload indicators
  Audible Alarm – Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
  Surge Protection and Filtering
  Surge energy rating – 273Joules
  Data Line Protection -RJ-11 Modem/Fax/DSL protection (two wire single line)
   
   
  Environmental
  Operating Temperature – 0 – 40 °C
  Operating Relative Humidity – 0 – 95 (non-condensing) %
  Operating Elevation – 0-3000meters
  Storage Temperature -15 – 40 °C
  Storage Relative Humidity 0 – 95 (non-condensing) %
  Storage Elevation – 0-9000meters
  Audible noise at 1 meter from surface of unit

  Add to cart

  Quick View
• 

  APC 700VA Backup UPS, 700VA 230V AVR IEC Sockets 360Watts/700VA UPS, BX700UI – Kenya

  KSh13,935.00

  APC Back-UPS 700VA 230V AVR IEC Sockets 390Watts/700VA 

  APC Back-UPS 700VA 230V AVR IEC Sockets 390Watts/700VA powers your computer and electronic equipment during storms and outages. The BX700UI features Automatic Voltage Regulation (AVR).

  This feature instantly adjusts high and low voltage fluctuations to safe levels for connected electronics, saving battery power for when you need it most during storms and outages. Equipped with 4 IEC sockets, the 700 keeps your desktop computer, monitor or other critical devices (router, modem, television, etc.) running when the power goes out.

  Specifically designed for electronic equipment in harsh power environments, the Back-UPS 700 maximizes productivity and work efficiency while providing critical power during emergencies.

  APC Back-UPS 700VA UPS Specifications
  Capacity: 700VA / 390 Watts
  Input Voltage: 230V
  Output Voltage: 230V
  UPS Topology: Standby
  Waveform Type: Stepped approximation to a sinewave
  Transfer Time: 8 ms typical
  Input Connections: IEC-320 C14
  Output Connections: 4 x IEC 320 C13
  Battery Type: Sealed lead-acid
  Battery Runtime: Varies depending on the load
  Recharge Time: 8 hours
  Communication Ports: USB
  Interface Port: RJ-45 10/100 Base-T Ethernet
  Audible Alarms: On Battery, Low Battery, Overload, Replace Battery
  Surge Energy Rating: 273 Joules
  Operating Temperature: 0°C to 40°C (32°F to 104°F)
  Dimensions: 215mm x 130mm x 336mm (8.46? x 5.12? x 13.23?)
  Weight: 7.38 kg (16.26 lbs)
  Output
  Max Configurable Power (Watts)- 390Watts / 700VA
  Output Frequency (sync to mains)  50/60 Hz +/-1 Hz
  Topology -Line Interactive
  Waveform type- Stepped approximation to a sinewave
  Transfer Time – 4ms typical
  Input
  Input frequency – 50/60 Hz +/- 3 Hz (auto sensing)
  Input voltage range for main operations – 140 – 300V
  Number of Power Cords -1
  Batteries & Runtime
  Battery type  – Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
  Typical recharge time – 6hour(s)
  Replacement Battery – BE650G2-GR
  Expected Battery Life (years) – 3 – 5
  RBC Quantity – 1
  Battery Volt-Amp-Hour Capacity – 84
  Runtime
   
   
  Communications & Management
  Interface Port(s) – USB
  Control panel – LED status display with On Line : On Battery : Replace Battery and Overload indicators
  Audible Alarm – Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
  Surge Protection and Filtering
  Surge energy rating – 273Joules
  Data Line Protection -RJ-11 Modem/Fax/DSL protection (two wire single line)
   
   
  Environmental
  Operating Temperature – 0 – 40 °C
  Operating Relative Humidity – 0 – 95 (non-condensing) %
  Operating Elevation – 0-3000meters
  Storage Temperature -15 – 40 °C
  Storage Relative Humidity 0 – 95 (non-condensing) %
  Storage Elevation – 0-9000meters
  Audible noise at 1 meter from surface of unit

  Add to cart

  Quick View
• 

  APC Back UPS 750VA – BX750MI 230V, AVR, IEC Sockets – Kenya

  KSh17,000.00

  APC Back UPS 750VA – BX750MI 230V, AVR, IEC Sockets

  The APC Back UPS 750VA (BX750MI) is designed to provide reliable power backup and protection for your electronic devices. With a power capacity of 750VA, it offers ample power to keep your equipment running during power outages.

  The built-in AVR (Automatic Voltage Regulation) technology ensures that the output voltage remains within a safe range, protecting your devices from harmful voltage fluctuations. The UPS features IEC sockets, allowing you to connect a variety of devices easily.

  In terms of performance, the APC Back UPS 750VA offers a fast transfer time, ensuring a seamless transition to battery power when the utility power goes out. The UPS provides battery backup to keep your devices operational until the power is restored or until you have a chance to safely shut them down. It also offers surge protection, safeguarding your equipment against damaging power surges and spikes.

  APC Back UPS 750VA features
  APC Back-UPS 750VA, 230V, AVR, IEC Sockets Battery Backup & Surge Protector for Electronics and Computers
  Automatic Voltage Regulation (AVR) automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
  APC BX750MI features dataline surge protection which provides protection of connected equipment from power surges on the data lines.
  LED Indicators provide easy-to-read status of the unit and utility power conditions.
  Quickly understand unit and power status with visual indicators thanks to LED status display.
  Additionally audible alarms provides notification of changing utility power and UPS power conditions
  APC 750VA UPS Intelligent battery management system maximizes battery performance, life, and reliability through intelligent, precision charging.
  Battery failure notification provides early-warning fault analysis on batteries enabling timely preventive maintenance
   
  APC 750VA Specifications
  Model: APC Back UPS 750VA (BX750MI)
  Capacity: 750VA/450W
  Input Voltage: 230V
  Output Voltage: 230V
  Topology: Standby
  Automatic Voltage Regulation (AVR): Yes
  Transfer Time: <10 ms Battery Type: Sealed Lead-Acid Battery Runtime: Varies depending on the load Surge Protection: Yes Surge Energy Rating: 273 Joules Number of Outlets: 4 x IEC C13 sockets Typical Recharge Time: 8 hours Audible Alarms: Battery backup warning, overload indicator LED Indicators: Online, on battery, fault, overload, Communication Ports: USB Dimensions: 185 x 115 x 215 mm (W x H x D) Weight: 4.6 kg Operating Temperature: 0°C to 40°C Operating Humidity: 0% to 95% non-condensing

  Add to cart

  Quick View
• 

  APC Back UPS 750VA – BX750MI 230V, AVR, IEC Sockets – Kenya

  KSh17,000.00

  APC Back UPS 750VA – BX750MI 230V, AVR, IEC Sockets

  The APC Back UPS 750VA (BX750MI) is designed to provide reliable power backup and protection for your electronic devices. With a power capacity of 750VA, it offers ample power to keep your equipment running during power outages.

  The built-in AVR (Automatic Voltage Regulation) technology ensures that the output voltage remains within a safe range, protecting your devices from harmful voltage fluctuations. The UPS features IEC sockets, allowing you to connect a variety of devices easily.

  In terms of performance, the APC Back UPS 750VA offers a fast transfer time, ensuring a seamless transition to battery power when the utility power goes out. The UPS provides battery backup to keep your devices operational until the power is restored or until you have a chance to safely shut them down. It also offers surge protection, safeguarding your equipment against damaging power surges and spikes.

  APC Back UPS 750VA features
  APC Back-UPS 750VA, 230V, AVR, IEC Sockets Battery Backup & Surge Protector for Electronics and Computers
  Automatic Voltage Regulation (AVR) automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
  APC BX750MI features dataline surge protection which provides protection of connected equipment from power surges on the data lines.
  LED Indicators provide easy-to-read status of the unit and utility power conditions.
  Quickly understand unit and power status with visual indicators thanks to LED status display.
  Additionally audible alarms provides notification of changing utility power and UPS power conditions
  APC 750VA UPS Intelligent battery management system maximizes battery performance, life, and reliability through intelligent, precision charging.
  Battery failure notification provides early-warning fault analysis on batteries enabling timely preventive maintenance
   
  APC 750VA Specifications
  Model: APC Back UPS 750VA (BX750MI)
  Capacity: 750VA/450W
  Input Voltage: 230V
  Output Voltage: 230V
  Topology: Standby
  Automatic Voltage Regulation (AVR): Yes
  Transfer Time: <10 ms Battery Type: Sealed Lead-Acid Battery Runtime: Varies depending on the load Surge Protection: Yes Surge Energy Rating: 273 Joules Number of Outlets: 4 x IEC C13 sockets Typical Recharge Time: 8 hours Audible Alarms: Battery backup warning, overload indicator LED Indicators: Online, on battery, fault, overload, Communication Ports: USB Dimensions: 185 x 115 x 215 mm (W x H x D) Weight: 4.6 kg Operating Temperature: 0°C to 40°C Operating Humidity: 0% to 95% non-condensing

  Add to cart

  Quick View
• 

  APC Easy UPS On-Line SRV 3000VA Smart UPS, SRV3KRILRK – Kenya

  KSh180,000.00

   APC Easy UPS On-Line SRV 3000VA Smart UPS, SRV3KRILRK 

  APC Single phase Easy UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 3kVA double-conversion on-line 4U rackmount UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions.

  The SRV comes with IEC 320 C20 input and 4x Brazilian 2P+T outlets. The On-Line UPS has a intelligent card slot for optional Network Management Card (AP9544, SRVSMB001, VGL9601l) that enables network-based UPS monitoring and management. The UPS can connect to EcoStruxure IT or third-party centralized management platforms.

  The Built-in automatic and manual bypass provide seamless power to the load even in the event of an internal detected fault or error in UPS. The UPS and the built-in lead-acid battery has a 2-year warranty. Ideal for small data centers, manufacturing facilities, computer rooms, network storage devices, telecommunication, and healthcare IT.

  High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.
  Includes: Basic UPS signalling RS-232 cable, CD with software, Rack mounting brackets, Rack mounting support rails, USB cable, User manual.
   
  SRV3KRILRK specifications
  Model: APC Easy UPS On-Line SRV 3000VA Smart UPS (SRV3KRILRK)
  Power Capacity: 3000VA / 2700W
  Input Voltage: 220V, 230V, 240V (Selectable)
  Output Voltage: 220V, 230V, 240V (Configurable)
  UPS Topology: Double-conversion online
  Input Connection: Hardwired
  Output Connections: Multiple IEC C13 and C19 outlets
  Battery Type: Sealed Lead Acid (Maintenance-free)
  Battery Runtime: Varies depending on load and battery configuration
  Interface Ports: USB, RS-232, SmartSlot for optional management card
  Alarm Notifications: Audible alarms, LED indicators, and optional network management card for remote monitoring
  Form Factor: Rack-mountable (2U)
  Transfer Time: Zero transfer time to battery during power outages
  Efficiency: High efficiency mode for energy savings
  Automatic internal bypass
  Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.
  Automatic restart of loads after UPS shutdown
  Automatically starts up the connected equipment upon the return of utility power.
  ECO Mode
  Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
  Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.
  Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
  Intelligent Card Slot
  Customize UPS capabilities with management cards.
  LCD graphics display
  Text and mimic diagrams that display modes of operation, system parameters and alarms.
  Serial connectivity
  Provides management of the UPS via a serial port.
  USB connectivity
  Provides management of the UPS via a USB port (not available on all models).
  Easy UPS On-Line Features & Benefits
  Availability

  Intelligent battery management

  Maximizes battery performance, life, and reliability through intelligent, precision charging.
  Features

  Safety-agency approved

  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

  Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.

  Management Software

  Double conversion on-line topology

  Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.

  Management Software

  Allows you to easily monitor your utility power and manage your UPS.

  Pure sine wave output on battery

  Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

  Intuitive LCD interface

  Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

  ECO Mode

  Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

  Generator compatible

  Ensures clean, uninterrupted power to protected equipment when generator power is used.

  High efficiency

  High efficiency rates that remain stable even at lower operating power levels

  Input power factor correction

  Minimizes installation costs by enabling the use of smaller generators and cabling.
  Manageability

  Intelligent Card Slot

  Customize UPS capabilities with management cards.

  LCD graphics display

  Text and mimic diagrams that display modes of operation, system parameters and alarms.

  LED Indicators

  Provide easy-to-read status of the unit and utility power conditions.

  Network manageable

  Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

  Serial connectivity

  Provides management of the UPS via a serial port.
  Serviceability

  Predictive failure notification.

  Provides early-warning fault analysis ensuring proactive component replacement.

  Disconnected battery notification

  Warns when a battery is not available to provide backup power.

  Audible alarms

  Provides notification of changing utility power and UPS power conditions

  Automatic self-test

  Add to cart

  Quick View
• 

  APC Easy UPS On-Line SRV 3000VA Smart UPS, SRV3KRILRK – Kenya

  KSh180,000.00

   APC Easy UPS On-Line SRV 3000VA Smart UPS, SRV3KRILRK 

  APC Single phase Easy UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 3kVA double-conversion on-line 4U rackmount UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions.

  The SRV comes with IEC 320 C20 input and 4x Brazilian 2P+T outlets. The On-Line UPS has a intelligent card slot for optional Network Management Card (AP9544, SRVSMB001, VGL9601l) that enables network-based UPS monitoring and management. The UPS can connect to EcoStruxure IT or third-party centralized management platforms.

  The Built-in automatic and manual bypass provide seamless power to the load even in the event of an internal detected fault or error in UPS. The UPS and the built-in lead-acid battery has a 2-year warranty. Ideal for small data centers, manufacturing facilities, computer rooms, network storage devices, telecommunication, and healthcare IT.

  High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.
  Includes: Basic UPS signalling RS-232 cable, CD with software, Rack mounting brackets, Rack mounting support rails, USB cable, User manual.
   
  SRV3KRILRK specifications
  Model: APC Easy UPS On-Line SRV 3000VA Smart UPS (SRV3KRILRK)
  Power Capacity: 3000VA / 2700W
  Input Voltage: 220V, 230V, 240V (Selectable)
  Output Voltage: 220V, 230V, 240V (Configurable)
  UPS Topology: Double-conversion online
  Input Connection: Hardwired
  Output Connections: Multiple IEC C13 and C19 outlets
  Battery Type: Sealed Lead Acid (Maintenance-free)
  Battery Runtime: Varies depending on load and battery configuration
  Interface Ports: USB, RS-232, SmartSlot for optional management card
  Alarm Notifications: Audible alarms, LED indicators, and optional network management card for remote monitoring
  Form Factor: Rack-mountable (2U)
  Transfer Time: Zero transfer time to battery during power outages
  Efficiency: High efficiency mode for energy savings
  Automatic internal bypass
  Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.
  Automatic restart of loads after UPS shutdown
  Automatically starts up the connected equipment upon the return of utility power.
  ECO Mode
  Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
  Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.
  Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
  Intelligent Card Slot
  Customize UPS capabilities with management cards.
  LCD graphics display
  Text and mimic diagrams that display modes of operation, system parameters and alarms.
  Serial connectivity
  Provides management of the UPS via a serial port.
  USB connectivity
  Provides management of the UPS via a USB port (not available on all models).
  Easy UPS On-Line Features & Benefits
  Availability

  Intelligent battery management

  Maximizes battery performance, life, and reliability through intelligent, precision charging.
  Features

  Safety-agency approved

  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

  Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.

  Management Software

  Double conversion on-line topology

  Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.

  Management Software

  Allows you to easily monitor your utility power and manage your UPS.

  Pure sine wave output on battery

  Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

  Intuitive LCD interface

  Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

  ECO Mode

  Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

  Generator compatible

  Ensures clean, uninterrupted power to protected equipment when generator power is used.

  High efficiency

  High efficiency rates that remain stable even at lower operating power levels

  Input power factor correction

  Minimizes installation costs by enabling the use of smaller generators and cabling.
  Manageability

  Intelligent Card Slot

  Customize UPS capabilities with management cards.

  LCD graphics display

  Text and mimic diagrams that display modes of operation, system parameters and alarms.

  LED Indicators

  Provide easy-to-read status of the unit and utility power conditions.

  Network manageable

  Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

  Serial connectivity

  Provides management of the UPS via a serial port.
  Serviceability

  Predictive failure notification.

  Provides early-warning fault analysis ensuring proactive component replacement.

  Disconnected battery notification

  Warns when a battery is not available to provide backup power.

  Audible alarms

  Provides notification of changing utility power and UPS power conditions

  Automatic self-test

  Add to cart

  Quick View
• 

  APC Notebook Surge Protector For AC Phone and Network lines 3pin Connection100-240V EMEA – Kenya

  KSh4,835.00

  APC Notebook Surge Protector For AC Phone and Network lines 3pin Connection100-240V EMEA 

  The APC Notebook Surge Protector is a compact and portable device designed to protect your notebook computer, as well as other connected devices, from power surges and spikes. It features a 3-pin connection that allows you to plug it directly into an AC outlet. The surge protector offers protection for AC power, phone lines, and network lines, ensuring comprehensive protection for your devices and data.

  With a wide input voltage range of 100-240V, the surge protector is suitable for use in various regions and can handle different voltage levels. It utilizes surge suppression technology to divert excess voltage away from your devices, preventing damage to sensitive electronics.

  Technical Specifications
  Device Type: Notebook Surge Protector
  Connection Type: 3-pin (AC Power)
  Input Voltage Range: 100-240V
  Surge Protection: Yes
  Protection for: AC Power, Phone Lines, Network Lines
  Compact and portable design
  LED indicators for surge protection status
  Suitable for use with notebook computers and other devices
  Provides protection against power surges and spikes
  Diverts excess voltage to protect sensitive electronics.
  Designed for safe and reliable operation
  Easy to use and install

  Add to cart

  Quick View
• 

  APC Notebook Surge Protector For AC Phone and Network lines 3pin Connection100-240V EMEA – Kenya

  KSh4,835.00

  APC Notebook Surge Protector For AC Phone and Network lines 3pin Connection100-240V EMEA 

  The APC Notebook Surge Protector is a compact and portable device designed to protect your notebook computer, as well as other connected devices, from power surges and spikes. It features a 3-pin connection that allows you to plug it directly into an AC outlet. The surge protector offers protection for AC power, phone lines, and network lines, ensuring comprehensive protection for your devices and data.

  With a wide input voltage range of 100-240V, the surge protector is suitable for use in various regions and can handle different voltage levels. It utilizes surge suppression technology to divert excess voltage away from your devices, preventing damage to sensitive electronics.

  Technical Specifications
  Device Type: Notebook Surge Protector
  Connection Type: 3-pin (AC Power)
  Input Voltage Range: 100-240V
  Surge Protection: Yes
  Protection for: AC Power, Phone Lines, Network Lines
  Compact and portable design
  LED indicators for surge protection status
  Suitable for use with notebook computers and other devices
  Provides protection against power surges and spikes
  Diverts excess voltage to protect sensitive electronics.
  Designed for safe and reliable operation
  Easy to use and install

  Add to cart

  Quick View
• 

  APC Smart-UPS RC 2000VA, 230V, LCD, 4x IEC 60320 C13 outlets, SRC2KI – Kenya

  KSh86,000.00

   APC Smart-UPS RC 2000VA, 230V, LCD, 4x IEC 60320 C13 outlets, SRC2KI

  Features Maximum configurable power 2000 VA, Green Premium product, Multifunction LCD status and control console, Bypass type Built-in bypass, UPS type Double conversion online, Mounting mode Not rack-mountable, USB compatible Yes, Nb of power socket outlets 4 IEC 60320 C13, Battery type Lead-acid battery.

  APC Smart-UPS RC 2000VA features

  Pure sine wave output on battery

  Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

  Management Software

  Allows you to easily monitor your utility power and manage your UPS.

  Intuitive LCD interface

  Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

  Input power factor correction

  Minimizes installation costs by enabling the use of smaller generators and cabling.

  High efficiency

  High efficiency rates that remain stable even at lower operating power levels

  Generator compatible

  Ensures clean, uninterrupted power to protected equipment when generator power is used.

  ECO Mode

  Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

  Double conversion on-line topology

  Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.

  Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.

  Management Software

  Safety-agency approved

  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  Serviceability

  Predictive failure notification.

  Provides early-warning fault analysis ensuring proactive component replacement.

  Disconnected battery notification

  Warns when a battery is not available to provide backup power.

  Automatic self-test

  Periodic battery self-test ensures early detection of a battery that needs to be replaced.

  Audible alarms

  Provides notification of changing utility power and UPS power conditions
  Availability

  Intelligent battery management

  Maximizes battery performance, life, and reliability through intelligent, precision charging.
  Manageability

  Network manageable

  Add to cart

  Quick View
• 

  APC Smart-UPS RC 2000VA, 230V, LCD, 4x IEC 60320 C13 outlets, SRC2KI – Kenya

  KSh86,000.00

   APC Smart-UPS RC 2000VA, 230V, LCD, 4x IEC 60320 C13 outlets, SRC2KI

  Features Maximum configurable power 2000 VA, Green Premium product, Multifunction LCD status and control console, Bypass type Built-in bypass, UPS type Double conversion online, Mounting mode Not rack-mountable, USB compatible Yes, Nb of power socket outlets 4 IEC 60320 C13, Battery type Lead-acid battery.

  APC Smart-UPS RC 2000VA features

  Pure sine wave output on battery

  Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

  Management Software

  Allows you to easily monitor your utility power and manage your UPS.

  Intuitive LCD interface

  Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

  Input power factor correction

  Minimizes installation costs by enabling the use of smaller generators and cabling.

  High efficiency

  High efficiency rates that remain stable even at lower operating power levels

  Generator compatible

  Ensures clean, uninterrupted power to protected equipment when generator power is used.

  ECO Mode

  Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

  Double conversion on-line topology

  Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.

  Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.

  Management Software

  Safety-agency approved

  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  Serviceability

  Predictive failure notification.

  Provides early-warning fault analysis ensuring proactive component replacement.

  Disconnected battery notification

  Warns when a battery is not available to provide backup power.

  Automatic self-test

  Periodic battery self-test ensures early detection of a battery that needs to be replaced.

  Audible alarms

  Provides notification of changing utility power and UPS power conditions
  Availability

  Intelligent battery management

  Maximizes battery performance, life, and reliability through intelligent, precision charging.
  Manageability

  Network manageable

  Add to cart

  Quick View
• 

  APC SMC 1000 Smart-UPS, 1000VA Tower, LCD 230V with SmartConnect Port, SMC1000IC – Kenya

  KSh89,000.00

  APC Smart-UPS 1000VA, Tower, LCD 230V with SmartConnect Port, SMC1000IC

  Smart-UPS range, an intelligent and efficient network power protection offer from entry-level to scalable runtime. This 1000VA/600W line-interactive UPS provides pure sine wave power to support critical electronics during power disruptions. The tower mount SMC has a SmartConnect port for cloud-based remote power monitoring, UPS firmware upgrades, remote diagnostics and email notifications with recommended actions.

  The PowerChute Business Edition provides unattended shutdown of servers and workstations via serial or USB cables. It comes with IEC 320 C14 input and 8x IEC 320 C13 outlets. This UPS has built-in lead-acid battery and is covered by a 2-year UPS warranty.

  Its dimensions are 439mm (depth) x 219mm (height) x 171mm (width) and weighs 17.27kg. Ideal for entry-level servers, networks, business VoIP, retail point-of-sale, edge networks and business desktops.

  It conforms to CE, GOST, VDE, and UL 1778. Designed for small offices or small business owners to maintain a core network and business communication.

  Protect your servers, switches, routers and networking devices from harmful power conditions, spikes and surges while providing battery backup power with Connected Smart-UPS™ with APC™ SmartConnect – the first cloud enabled UPS for distributed IT.

  The included service-free cloud monitoring feature is accessible from any internet connected device, and maximizes the life and performance of your UPS by providing proactive advice and life cycle recommendations so you can remotely monitor your power infrastructure from anywhere in the world.

  APC SMC1000IC UPS Specifications
  Model: SMC1000IC
  Capacity: 1000VA/700W
  Topology: Line Interactive
  Input Voltage: 230V
  Output Voltage: 230V
  Form Factor: Tower
  LCD Display: Yes
  Communication Port: SmartConnect Port
  Outlets: 8x IEC C13 outlets
  Battery Type: Sealed lead-acid
  Typical Recharge Time: 3 hours
  Surge Protection: Yes
  Automatic Voltage Regulation (AVR): Yes
  Transfer Time: 2-4 ms
  Efficiency: Up to 97%
  Audible Alarm: Yes
  Communication: USB, SmartConnect Port.
  Software: PowerChute Business Edition
  Dimensions (H x W x D): 215 x 130 x 345 mm
  Weight: 13.84 kg

  Add to cart

  Quick View
• 

  APC SMC 1000 Smart-UPS, 1000VA Tower, LCD 230V with SmartConnect Port, SMC1000IC – Kenya

  KSh89,000.00

  APC Smart-UPS 1000VA, Tower, LCD 230V with SmartConnect Port, SMC1000IC

  Smart-UPS range, an intelligent and efficient network power protection offer from entry-level to scalable runtime. This 1000VA/600W line-interactive UPS provides pure sine wave power to support critical electronics during power disruptions. The tower mount SMC has a SmartConnect port for cloud-based remote power monitoring, UPS firmware upgrades, remote diagnostics and email notifications with recommended actions.

  The PowerChute Business Edition provides unattended shutdown of servers and workstations via serial or USB cables. It comes with IEC 320 C14 input and 8x IEC 320 C13 outlets. This UPS has built-in lead-acid battery and is covered by a 2-year UPS warranty.

  Its dimensions are 439mm (depth) x 219mm (height) x 171mm (width) and weighs 17.27kg. Ideal for entry-level servers, networks, business VoIP, retail point-of-sale, edge networks and business desktops.

  It conforms to CE, GOST, VDE, and UL 1778. Designed for small offices or small business owners to maintain a core network and business communication.

  Protect your servers, switches, routers and networking devices from harmful power conditions, spikes and surges while providing battery backup power with Connected Smart-UPS™ with APC™ SmartConnect – the first cloud enabled UPS for distributed IT.

  The included service-free cloud monitoring feature is accessible from any internet connected device, and maximizes the life and performance of your UPS by providing proactive advice and life cycle recommendations so you can remotely monitor your power infrastructure from anywhere in the world.

  APC SMC1000IC UPS Specifications
  Model: SMC1000IC
  Capacity: 1000VA/700W
  Topology: Line Interactive
  Input Voltage: 230V
  Output Voltage: 230V
  Form Factor: Tower
  LCD Display: Yes
  Communication Port: SmartConnect Port
  Outlets: 8x IEC C13 outlets
  Battery Type: Sealed lead-acid
  Typical Recharge Time: 3 hours
  Surge Protection: Yes
  Automatic Voltage Regulation (AVR): Yes
  Transfer Time: 2-4 ms
  Efficiency: Up to 97%
  Audible Alarm: Yes
  Communication: USB, SmartConnect Port.
  Software: PowerChute Business Edition
  Dimensions (H x W x D): 215 x 130 x 345 mm
  Weight: 13.84 kg

  Add to cart

  Quick View
• 

  BV-650I-MSX APC 650VA EASY UPS – Kenya

  KSh11,500.00

  650VA APC EASY UPS BV 650VA 230V BV650I-MSX UPS

  650VA APC EASY UPS BV 650VA 230V BV650I-MSX UPS automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. APC EASY UPS BV 650VA UPS allow flexibility for setup in tight locations and mounting on wall or other surfaces.

  BV 650VA 230V BV650I-MSX UPS outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

  APC EASY UPS BV 650VA UPS Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. 650VA 230V BV650I-MSX UPS Back up and protect your hardware and data during power outages, surges and spikes.

  650VA APC EASY UPS Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home. APC EASY UPS BV 650VA UPS Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

  APC EASY UPS BV 650VA UPS Provides early-warning fault analysis on batteries enabling timely preventive maintenance. 650VA 230V BV650I-MSX UPS Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

  650VA 230V BV650I-MSX UPS specifications

  Output – Output power capacity 375Watts / 650VA – Max Configurable Power (Watts) 375Watts / 650VA – Nominal Output Voltage 230V – Output Frequency (not synced) 50/60 Hz +/-1 Hz – Topology Line Interactive – Waveform type Stepped approximation to a sinewave – Transfer Time 6ms typical : 10ms maximum

  Input – Nominal Input Voltage 230V – Input frequency 50/60 Hz +/- 5 Hz (auto sensing) – Input Connections IEC-320 C14 – Cord Length 1.52meters – Number of Power Cords 1 – Batteries & Runtime – Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof – Expected Battery Life (years) 3 – 5 – Efficiency View Efficiency Graph (Available in Technical Tab on site).

  Communications & Management – Control panel LED Status display with On Line : On Battery – Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm – Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. – Product link: https://www.apc.com/shop/hr/en/products/APC-EASY-UPS-BV-650VA-AVR-Universal-Outlet-230V/P-BV650I-MS Page 1 of 2

  APC EASY UPS BV 650VA Technical Specifications 

  Model: APC Easy UPS BV 650VA.
  Capacity: 650VA/360W
  Input Voltage: 230V
  Output Voltage: 230V
  Topology: Standby
  Transfer Time: <10 ms Automatic Voltage Regulation (AVR): Yes Battery Type: Sealed Lead-Acid Battery Runtime: Varies depending on the load Surge Protection: Yes Surge Energy Rating: 273 Joules Number of Outlets: 3 x Universal sockets (C13) Typical Recharge Time: 4-6 hours. Audible Alarms: Battery backup warning, overload indicator LED Indicators: Online, on battery, fault, overload Communication Ports: None Dimensions: 275 x 85 x 142 mm (W x H x D) Weight: 3.3 kg Operating Temperature: 0°C to 40°C Operating Humidity: 0% to 90% non-condensing

  Add to cart

  Quick View
• 

  BV-650I-MSX APC 650VA EASY UPS – Kenya

  KSh11,500.00

  650VA APC EASY UPS BV 650VA 230V BV650I-MSX UPS

  650VA APC EASY UPS BV 650VA 230V BV650I-MSX UPS automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. APC EASY UPS BV 650VA UPS allow flexibility for setup in tight locations and mounting on wall or other surfaces.

  BV 650VA 230V BV650I-MSX UPS outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

  APC EASY UPS BV 650VA UPS Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. 650VA 230V BV650I-MSX UPS Back up and protect your hardware and data during power outages, surges and spikes.

  650VA APC EASY UPS Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home. APC EASY UPS BV 650VA UPS Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

  APC EASY UPS BV 650VA UPS Provides early-warning fault analysis on batteries enabling timely preventive maintenance. 650VA 230V BV650I-MSX UPS Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

  650VA 230V BV650I-MSX UPS specifications

  Output – Output power capacity 375Watts / 650VA – Max Configurable Power (Watts) 375Watts / 650VA – Nominal Output Voltage 230V – Output Frequency (not synced) 50/60 Hz +/-1 Hz – Topology Line Interactive – Waveform type Stepped approximation to a sinewave – Transfer Time 6ms typical : 10ms maximum

  Input – Nominal Input Voltage 230V – Input frequency 50/60 Hz +/- 5 Hz (auto sensing) – Input Connections IEC-320 C14 – Cord Length 1.52meters – Number of Power Cords 1 – Batteries & Runtime – Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof – Expected Battery Life (years) 3 – 5 – Efficiency View Efficiency Graph (Available in Technical Tab on site).

  Communications & Management – Control panel LED Status display with On Line : On Battery – Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm – Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. – Product link: https://www.apc.com/shop/hr/en/products/APC-EASY-UPS-BV-650VA-AVR-Universal-Outlet-230V/P-BV650I-MS Page 1 of 2

  APC EASY UPS BV 650VA Technical Specifications 

  Model: APC Easy UPS BV 650VA.
  Capacity: 650VA/360W
  Input Voltage: 230V
  Output Voltage: 230V
  Topology: Standby
  Transfer Time: <10 ms Automatic Voltage Regulation (AVR): Yes Battery Type: Sealed Lead-Acid Battery Runtime: Varies depending on the load Surge Protection: Yes Surge Energy Rating: 273 Joules Number of Outlets: 3 x Universal sockets (C13) Typical Recharge Time: 4-6 hours. Audible Alarms: Battery backup warning, overload indicator LED Indicators: Online, on battery, fault, overload Communication Ports: None Dimensions: 275 x 85 x 142 mm (W x H x D) Weight: 3.3 kg Operating Temperature: 0°C to 40°C Operating Humidity: 0% to 90% non-condensing

  Add to cart

  Quick View
• 

  PM5-UK , APC Essential Surge Arrest 5 outlets 230V UK

  KSh5,295.00

  Description
  PM5-UK – APC Essential Surge Arrest 5 outlets 230V UK 

  PM5-UK  APC Essential Surge Arrest 5 outlets 230V UK from the leading online shop in Nairobi Kenya, buy online and have it delivered.

  The APC Essential Surge Arrest PM5-UK is a surge protector designed for use in the UK with 230V power outlets. Here are the detailed specifications of the product:

  Surge Protection: Provides surge protection for connected equipment against power surges and spikes.
  Outlets: Features 5 UK power outlets to connect your devices.
  Joule Rating: Offers a joule rating that indicates the energy absorption capacity of the surge protector.
  Response Time: Provides a fast response time to protect your devices from sudden voltage spikes.
  LED Indicators: Includes LED indicators to show the status of surge protection and grounding.
  Maximum Spike Current: Provides a maximum spike current capacity to handle large surges.
  Noise Filtering: Offers noise filtering capabilities to reduce electromagnetic interference.
  Clamping Voltage: Provides a clamping voltage level to limit the voltage supplied to connected devices.
  Cord Length: Comes with a specific cord length to connect the surge protector to a power source.
  Mounting Options: Offers various mounting options, such as wall mounting or using it on a desktop or workbench.
  Dimensions: Provides the dimensions of the surge protector, including height, width, and depth.
  PM5-UK Specifications
   
  Model: PM5-UK
  Voltage Compatibility: 230V
  Maximum Surge Current: 13,000 Amps
  Surge Energy Rating: 918 Joules
  Number of Outlets: 5
  Outlet Type: UK
  EMI/RFI Noise Filtration: Yes
  Response Time: <1 nanosecond Protection Modes: Line to Neutral, Line to Ground, Neutral to Ground LED Indicators: Power On, Ground OK Power Cord Length: 1.83 meters Dimensions: 38 x 88 x 245 mm

  Add to cart

  Quick View