Optical Fiber receiver with return path T.0X 1200..1600nm…
KSh235,266.00
Are optical receivers that deliver the original RF signal that has previously been converted by a fiber optic transmitter. Ref. 2336 and 233601 features return path optical transmitter.**Multi-window input (1200 ******1600 nm). Wide input dynamic range (-10 to 6 dBm).
Are optical receivers that deliver the original RF signal that has previously been converted by a fiber optic transmitter.
Features
Ref. 2336 and 233601 features return path optical transmitter.
Multi-window input (1200 ???1600 nm).
Wide input dynamic range (-10 to 6 dBm).
RF amplified output capable of delivering: 114dB?V in MATV, and 117dB?V in SAT IF.
Control signals available for monitoring optical input signal. Ref.2336 and 233601 also monitors the optical output signal in the return path.
Equipped with tension-free connections (relay) for use as an alarm when the received optical power falls.
Specifications
Reference 2336
USA version 233601
?
?
?
?
INPUT
?
?
?
? ?
?
?F.O.
Forward
path
? ?Wavelength nm 1200…1600
?Detection bandwidth MHz 1…3000
?Optical power received (max) ?dBm 4/6
?Optical connector? SC/APC
?
?
?RF
Return
path
?
? ?Frequency range ?MHz ?1…65
5…42 (1)
?Return path input level DIN45004B ?dB?V ?95
?Equivalent input noise figure @ 30 MHz ?dbm/Hz ?-152,5
?Return losses ?dB ?? 11
?Impedance ?? 75
?????
?
?
?
?
?OUTPUT
?
?
? ?
?
?RF
Forward
path
?
?
? ?Frequency range MHz ?87…2150
54…2150 (1)
?Max. output level for
CSO & CTB >= 60 dB(2) MATV ?dB?V/dBmV ?93 / 33
SAT IF ?dB?V/dBmV ?90 / 30
?Regulation margin ?dB ?0 – 18
?Return losses ?dB ?? 11
?Impedance ?? ?75
?
?F.O.
Return
path
? ?Wavelength nm ?1310
?Optical power transmitted (max) ?dBm ?2/3
4/6 (1)
?Optical connector? SC/APC
?????
??
?GENERAL
??
?? ?Powering voltage ?Vdc 12 – 24
?Consumption 24Vdc ?mA ?175
?Ingress protection ?IP ?20
?Dimensions (WxHxD) mm ?50 x 216 x 175
MORE PRODUCT INFORMATION
Related products
-
Add to cartThe FTTH transmitter receives one RF terrestrial signal (DTT from one headend) and one optical satellite signal (1310 nm) as inputs. The device converts DTT into optical (1550 nm) and multiplexes it with the satellite input to provide one single optical fiber output (1310 nm/1550 nm) with all the contents.**Part of FULL SAT+DTT system, to be used together with the FTTH receiver televes-237320.
-
Add to cartKit consisting of LNB WideBand that captures the entire frequency spectrum of a satellite and transmits it through two outputs (V-H) in a frequency range between 290 and 2340MHz. The optical transmitter receives the signal from the LNB in its two satellite inputs, in addition to including a third input for terrestrial signal (88-694MHz) mixing.
-
Add to cartTool used to crimp and cut excess cable from pass-through and non-pass through RJ45 male connectors in a single action.
-
Read moreThe DSX-602PRO is an indispensable certification tool for the analysis of twisted pair networks. Ranging from Cat 3 / Class C to Cat 6A / Class E, it offers speed and reliability to make your work more efficient and productive.
-
Add to cartCWDM WideBand satellite and terrestrial optical transmitter specifically designed for indoor installation. This device receives a satellite signal from a RF Wideband LNB and terrestrial band, and distributes it up to 64 users over a fiber output in the 1550nm window with 9dBm optical power.
Reviews
There are no reviews yet.