Alcad UE-404 Quattro lnb, universal

Related products

• 

  Inverto Inverto LNB Pro Wideband 40mm whit…

  KSh5,980.00

  Specifically designed to meet DTH operators’ growing demand for lower cost MDU and Multi-tuner Home Gateway installations. This professional LNB is based on a single 10.40 GHz local oscillator that delivers exceptional RF performance across the entire frequency range (L-band) on two output ports (vertical and horizontal) combined with increased immunity against terrestrial/4G interference. .

  Manufactured to the highest industry quality standards and designed to meet strict specifications, this LNB is an ideal solution for cost-effective reception of a satellite and its distribution to home gateways with multiple tuners or multiple switches with LNB inputs. compatible broadband.

  Features
  Local oscillator: 10.40 GHz
  Low phase noise, compatible with DVB-S2 (HDTV)
  Low noise design
  Low energy consumption
  High cross polarization isolation
  High frequency stability (PLL)
  Greater immunity against 4G interference
  Specifications
  Technical specifications
  Input frequency range 10.7GHz ~ 12.75GHz
  IF frequency range 300~2350MHz
  noise figure 0.7 dB typ. (1 dB maximum)
  Low Frequency 10.40GHz
  LO frequency accuracy at 25? ?0.5MHz
  LO temperature drift ?1MHz
  LO phase noise at 10 kHz – 80 dBc / Hz max.
  conversion gain 50dB ~ 60dB min.
  Gain Variation (Bandwide) ?0.5dB @ 27MHz
  Image rejection 40 dB min. (8.05 GHz to 10.1 GHz)
  1 dB compression point (@ output) 0.0 dBm min.
  Cross polarization isolation 25 dB min.
  VSWR output 2.5:1
  At the spurious band level -60 dBm max
  Current consumption 100mA max @11V~20V
  Operating temperature -30?C ~ +60?C
  Output impedance 75?
  Output connector type F-Type (female)
  Weight 98g

  Add to cart

  Quick View
• 

  LNB Inverto Single Monoblock 23mm, 6? for 80cm dish with…

  The LNB is supplied with a 40 mm plastic ring adaptor to allow mounting onto a standard 40mm LNB holder.

  Specifically designed for the European DTH markets, this Monoblock LNB allows for dual satellite reception from orbital positions 13?E and 19.2?E over a single 80cm offset satellite dish antenna with F/D = 0.6 and their distribution to one satellite receiver.

  The LNB receives satellite broadcasts with horizontal and vertical polarizations within the 10.7 ~ 12.75 GHz frequency range. It provides a single universal output port with 950 ~ 2150 MHz IF frequency range. The output F-type port carries also power supply and control signals. DiSEqC 1.0 commands allow selecting the orbital satellite position. As long as no DiSEqC command has been received, the default feed is the “Sat A” position (i.e. 13?E). Polarization (vertical/horizontal) and band (low/high) are selected using 13/18VDC and 0/22kHz control signals.

  The LNB is optimized for Ultra High Definition (4K/8K) transmissions and provides excellent Cross polarization isolation, Phase Noise and Noise Figure performances. Designed to meet strict specifications and manufactured to the highest industry quality standards, this LNB is an ideal solution for satellite broadcast reception of Hotbird 13?E and Astra 19.2?E across Europe.

  Features
  Low Phase Noise, DVB-S2 (HDTV) compliant
  Low Noise Figure
  Low Power consumption
  Very high Cross Polarization Isolation
  Very high Frequency stability

  Specifications
  Low band input frequency range 10.7 GHz ~ 11.7 GHz
  Low band output frequency range 950 MHz ~ 1950 MHz
  Low band LO frequency 9.75 GHz
  High band input frequency range 11.7 GHz ~ 12.75 GHz
  High band output frequency range 1100 MHz ~ 2150 MHz
  High band LO frequency 10.6 GHz
  Noise figure 0.6 dB typ., 1.0 dB max.
  LO frequency accuracy @ 25? C ?0.5 MHz max.
  LO temperature drift ?1 MHz max.
  LO initial accuracy ?0.5 MHz max.
  LO phase noise @ 1 kHz -60 dBc/Hz
  LO phase noise @ 10 kHz -80 dBc/Hz
  LO phase noise @ 100 kHz -90 dBc/Hz
  Conversion gain 58 dB ~ 68 dB
  Gain ripple (over 26 MHz bandwidth) ?0.75 dB max.
  Gain variation (over full band) 6 dBpp max.
  Image rejection 50 dB min.
  1 dB compression point (@ output) 0 dBm min.
  Cross talk 22 dB min.
  Control, Satellite A/B/C/D Selection DiSEqC 1.0: Sat A* = Hotbird 13?E, Sat B = Astra 19.2?E* Default Satellite Reception
  Polarity info Horizonatal polarization: 18 VDC
  Vertical polarization: 13 VDC
  Low band: 0 kHz
  High band: 22 ?4kHz
  Output VSWR 2.0 : 1 max.
  In band spurious level -65 dBm max.
  Current consumption 120 mA max. per port (10 VDC ~ 20 VDC)
  Operating temperature -30 ?C ~ +60 ?C
  Output impedance 75 ?
  Output connector type F-Type (female)
  Recommended Dish Size 80 cm (F/D = 0.6)
  Weight 225 g

  Read more

  Quick View
• 

  Alcad UE-203 Twin lnb, universal

  KSh5,880.00

  Alcad UE-203 – Serie 912: Twin lnb, universal.

  Universal twin LNB for offset parabolic antennas, for individual installations.

  High stability in frequency and high gain. The very low noise level provides quality reception in areas of weak signal.

  Downloads

  Technical specification

  Technical specification

  Catalogues

  CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB

  Certificates

  CE Declaration UE-203 pdf 64.45 KB

  Technical specifications

  Add to cart

  Quick View
• 

  Johansson 9720 Multiband LNB

  KSh8,060.00

  Add to cart

  Quick View
• 

  Inverto LNB Single Black Ultra 40mm High Gain Low Noise PLL 8K

  Inverto?s high-performance Ultra LNBs were specifically designed to address the need for superior reception under the edges of the satellite footprint skirt, small dish sizes or long coax cables. Thanks to its novel feed horn design and superior front-end components, this LNB provides higher conversion gain yet with low noise figure and best phase noise performance. The combination of innovative feed horn design, higher spec components, excellent cross polarization isolation and advanced filter design enables improved handling of interfering and spurious signals. This LNB provides a leap in the overall reception performance compared with standard LNBs, enabling the reception of signals from one satellite, its distribution to a single tuner Set-top box and is ready for Ultra High Definition TV transmissions in 4K or 8K resolution. Designed to meet strict specifications and manufactured to the highest industry standards, this unique range of LNBs is an ideal solution for installations with challenging reception conditions.

  Features
  Novel feed horn design
  Superior Phase Noise performance, DVB-S2X compliant supporting Ultra HD (4K and 8K) TV
  Excellent Cross Polarization Isolation
  Very Low Spurious Levels
  Superior Noise Figure with high Conversion Gain
  High 4G Immunity
  Ultimate Reliability

  Specifications
  Technical specifications
  Low band input frequency range 10.7 GHz ~ 11.7 GHz
  Low band output frequency range 950 MHz ~ 1950 MHz
  Low band LO frequency 9.75 GHz
  High band input frequency range 11.7 GHz ~ 12.75 GHz
  High band output frequency range 1100 ~ 2150 MHz
  High band LO frequency 10.6 GHz
  Noise figure 0.6 dB typ. (1 dB Max.)
  LO temperature drift ? 2.0 MHz max.
  LO initial accuracy ? 1.0 MHz max.
  LO phase noise @ 1 kHz -70 dBc/Hz
  LO phase noise @ 10 kHz -80 dBc/Hz
  LO phase noise @ 100 kHz -90 dBc/Hz
  LO phase noise @ 1 MHz -100 dBc/Hz
  Conversion gain 60 ~ 70 dB
  Gain ripple (over 26 MHz bandwidth) 1 dB max. (peak-to-peak)
  Gain variation (over full band) 4 dB max. (peak-to-peak)
  Image rejection 50 dB min.
  3th order intermodulation – ICP3 +10 dBm min
  1 dB compression point (@ output) 0 dBm min.
  Cross polarization isolation 22 dB min.
  Control signal Ca (V) 10.0 V ~ 14.0 V
  Control signal Cb (H) 16.0 V ~ 20.0 V
  Control signal Cc (band switching) 22 kHz ? 4 kHz, 0.4V ? 0.8V pp
  Output VSWR 2.0 : 1 max.
  In band spurious level -65 dBm max.
  Current consumption 100 mA max. (10 VDC ~ 20 VDC)
  Operating temperature -30 ?C ~ +60 ?C
  Output impedance 75 ? (F-type)
  Output connector type F-Type (female)
  Weight 111.2 g

  Read more

  Quick View