LNB Inverto Unicable Quad 40mm with 2 Legacy port
LNB Unicable Quad con dos puertos compatibles.
Un miembro de la innovadora y premiada serie de Unicable LNB este producto altamente competitivo permite la conexi?n de hasta 4 STB utilizando un ?nico cable, as? como 2 STB m?s en sus puertos “Legacy” . El producto se suministra con una unidad separadora (opcional) para una distribuci?n flexible de la se?al del sat?lite en su casa. Fue dise?ado espec?ficamente para el mercado europeo, y proporciona capacidades de recepci?n optimizada para transmisiones de alta definici?n. Fabricado con los m?s altos est?ndares de calidad de la industria y con una excelente figura de ruido y ruido de fase, este LNB es una soluci?n ideal para la recepci?n v?a sat?lite multi-habitaci?n y es un producto de elecci?n para la mayor?a de los operadores de televisi?n digital por sat?lite m?s importantes de toda Europa.
Caracter?sticas principales:
Bajo ruido de fase, HDTV-DVBS2 compatible.
Bajo Ruido de Figura.
Bajo consumo de energ?a.
Aislamiento muy alto de la polarizaci?n cruzada.
Alta estabilidad de frecuencia.
2 puerto Legado.
Especificaciones:
Low Band Input Frequency Range
10.7~11.7 GHz
LO Frequency
9.75 GHz
High Band Input Frequency Range
11.7~12.75 GHz
LO Frequency 10.6 C+Hz
LO Initial Accuracy +/- 1.0 MHz
LO Temperature Drift +/- 2.5 MHz
LO Phase Noise @ 10K Hz -90 dBc/Hz max.
SCR Conversion Gain 57 dB min.
Legacy Conversion Gain 55 dB Min.
Gain Variation +/- 0.75 dB/ 27 MHz
Image Rejection 40 dB min.
1 dB Compression Point (O/P) 0.0 dBm min.
Cross-pole Isolation 20 dB Min.
O/P VSWR 2.5 : 1
Output Impedance 75? (F-type)
IF Channel bandwidth 60 MHz
Output IF Channel 1 (SCR0) 1210 MHz
Output IF Channel 2 (SCR1) 1420 MHz
Output IF Channel 3 (SCR2) 1680 MHz
Output IF Channel 4 (SCR3) 2040 MHz
Channel isolation 20 dB Min.
Legacy ports 2
SCR’s Control Signals DiSEqC command extension based on EN-50494
Legacy Switch Voltage Control <14.2 (V) ,? >15 (H) Volts
Legacy 22k sensitivity 220 mV [min.]
DC Power 250mA@13.5V
Working Temperature – 30?C~ + 60?C
?Weight ? 350g
?
?
Related products
-
Inverto PLL Single Premium Universal 40mm LNB
KSh1,960.00Add to cartSpecifically designed and selected to address the demand of the global DTH market for a competitive and 4G/LTE protected solution, this LNB provides optimized reception capabilities using the latest chipset technology and waveguide design for satellite signal reception. It enables the reception of satellite TV and radio from a single satellite and its distribution to a single tuner Set-top box. The LNB supports HD and UHD transmissions, delivers one-of-a-kind RF performances, very low power consumption and importantly engineered to mitigate interferences from 4G/LTE transmissions.
Manufactured to the highest industry quality standards and engineered to meet strict specifications, this LNB is an ideal solution for the demanding customer of DTH operators and satellite broadcast reception across the world. IDLP-SNL413-PREMU-OPN
Features
Low phase noise, DVB-S2 compatible (HD and UHD)
Very low noise figure
Low energy consumption
High cross polarization isolation
High frequency stability
Specifications
Technical specifications
Low band input frequency range 10.7ghz ~ 11.7ghz
Low band output frequency range 950MHz~1950MHz
Low band LO frequency 9.75ghz
High band input frequency range 11.7ghz ~ 12.75ghz
High band output frequency range 1100MHz~2150MHz
High band LO frequency 10.6ghz
Noise figure 0.2 dB typical. (0.7 dB max.)
LO temperature drift ?2.0 MHz max.
Initial accuracy LO ?500 kHz max.
LO phase noise at 1 kHz -70dBc/Hz
LO phase noise at 10 kHz -80dBc/Hz
LO phase noise at 100 kHz -90dBc/Hz
LO phase noise @ 1 MHz -100dBc/Hz
Conversion gain 57dB ~ 67dB
Ripple gain (over 26 MHz bandwidth) 1 dB max (peak to peak)
Gain variation (over full band) 4 dB max (peak to peak)
Image rejection 40 dB min.
3rd order intermodulation – ICP3 +10 dBm min.
1 dB compression point (@ output) 0 dBm min.
Cross polarization isolation 22 dB min.
Ca (V) control signal 10.0v ~ 14.0v
Control signal Cb (H) 16.0v ~ 20.0v
Control signal Cc (band shift) 22 kHz ? 4 kHz, 0.4V ? 0.8Vpp
Exit ROE 2.0 : 1 max.
Spurious level in band -65 dBm max.
Current consumption 100mA max (10VDC ~ 20VDC)
Operating temperature -30 ?C ~ +60 ?C
Output impedance 75 ? (type F)
Output connector type Type F (female)
Weight 111 g -
Add to cartSpecifically designed for the European DTH markets, this Monoblock LNB allows for dual satellite reception. This LNB can be used for satellite broadcast (on an 80cm dish antenna) reception of any two satellites spaced with 3?. This LNB enables the signal distribution to maximum four Set Top Boxes with Single Tuner (or two STBs with Twin Tuner). It is optimized for High Definition transmissions and provides excellent Noise Figure performance. Designed to meet strict specifications and manufactured to the highest industry quality standards, this LNB is an ideal solution for satellite broadcast reception across Europe.
Features
Low Phase Noise, DVB-S2 (HDTV) compliant
Low Noise Figure (0.2 dB)
Low Power Consumption
Very high Cross Polarization Isolation
Very high Frequency Stability
23mm feed
4 analog/digital outputs
switching via DiSEqC 1.0
60 month warrantySpecifications
Technical specifications
Low band input frequency range 10.7 GHz ~ 11.7 GHz
Low band output frequency range 950 MHz ~ 1950 MHz
Low band LO frequency 9.75 GHz
High band input frequency range 11.7 GHz ~ 12.75 GHz
High band output frequency range 1100 MHz ~ 2150 MHz
High band LO frequency 10.6 GHz
Noise figure 0.2 dB typ. (0.7 dB max.)?
LO temperature drift ?3.0 MHz Max.
LO initial accuracy ?1.0 MHz Max.
LO phase noise @ 10 kHz -80 dBc / Hz max.
Conversion gain 50 dB ~ 60 dB
Gain ripple (over 26 MHz bandwidth) ?0.75 dB
Gain variation (over full band) ?4 dB max.
Image rejection 40 dB min.
1 dB compression point (@ output) 0.0 dBm min.
Control, Satellite A/B/C/D Selection DiSEqC 1.0 (Sat A* = East Satellite Position, Sat B = West Satellite Position)
* Default Satellite Reception
Cross polarization isolation 22 dB min.
Output VSWR 2.5 : 1?
In band spurious level -60 dBm max.
Current consumption 250 mA max. @ 11 V ~ 20 V
Operating temperature -30 ?C??~??+60 ?C
Output impedance 75 ?
Output connector type F-Type (female)
Recommended Dish Size 75-85 cm (F/D = 0.6)
Weight 485 g -
Read moreThe LNB is supplied with a 40 mm plastic ring adaptor to allow mounting onto a standard 40mm LNB holder.
Specifically designed for the European DTH markets, this Monoblock LNB allows for dual satellite reception from orbital positions 13?E and 19.2?E over a single 80cm offset satellite dish antenna with F/D = 0.6 and their distribution to one satellite receiver.
The LNB receives satellite broadcasts with horizontal and vertical polarizations within the 10.7 ~ 12.75 GHz frequency range. It provides a single universal output port with 950 ~ 2150 MHz IF frequency range. The output F-type port carries also power supply and control signals. DiSEqC 1.0 commands allow selecting the orbital satellite position. As long as no DiSEqC command has been received, the default feed is the “Sat A” position (i.e. 13?E). Polarization (vertical/horizontal) and band (low/high) are selected using 13/18VDC and 0/22kHz control signals.
The LNB is optimized for Ultra High Definition (4K/8K) transmissions and provides excellent Cross polarization isolation, Phase Noise and Noise Figure performances. Designed to meet strict specifications and manufactured to the highest industry quality standards, this LNB is an ideal solution for satellite broadcast reception of Hotbird 13?E and Astra 19.2?E across Europe.
Features
Low Phase Noise, DVB-S2 (HDTV) compliant
Low Noise Figure
Low Power consumption
Very high Cross Polarization Isolation
Very high Frequency stabilitySpecifications
Low band input frequency range 10.7 GHz ~ 11.7 GHz
Low band output frequency range 950 MHz ~ 1950 MHz
Low band LO frequency 9.75 GHz
High band input frequency range 11.7 GHz ~ 12.75 GHz
High band output frequency range 1100 MHz ~ 2150 MHz
High band LO frequency 10.6 GHz
Noise figure 0.6 dB typ., 1.0 dB max.
LO frequency accuracy @ 25? C ?0.5 MHz max.
LO temperature drift ?1 MHz max.
LO initial accuracy ?0.5 MHz max.
LO phase noise @ 1 kHz -60 dBc/Hz
LO phase noise @ 10 kHz -80 dBc/Hz
LO phase noise @ 100 kHz -90 dBc/Hz
Conversion gain 58 dB ~ 68 dB
Gain ripple (over 26 MHz bandwidth) ?0.75 dB max.
Gain variation (over full band) 6 dBpp max.
Image rejection 50 dB min.
1 dB compression point (@ output) 0 dBm min.
Cross talk 22 dB min.
Control, Satellite A/B/C/D Selection DiSEqC 1.0: Sat A* = Hotbird 13?E, Sat B = Astra 19.2?E* Default Satellite Reception
Polarity info Horizonatal polarization: 18 VDC
Vertical polarization: 13 VDC
Low band: 0 kHz
High band: 22 ?4kHz
Output VSWR 2.0 : 1 max.
In band spurious level -65 dBm max.
Current consumption 120 mA max. per port (10 VDC ~ 20 VDC)
Operating temperature -30 ?C ~ +60 ?C
Output impedance 75 ?
Output connector type F-Type (female)
Recommended Dish Size 80 cm (F/D = 0.6)
Weight 225 g -
Conversor LNB Universal Televes
KSh2,638.00 -
Add to cartRange of universal LNBs low noise figure and high gain that allow capturing signals in the KU band.
Reviews
There are no reviews yet.