Category: Amplification
Amplification
Showing 81–154 of 154 results
-
Alcad MD-531 Modulator wideband bg standard stereo
KSh20,820.00Add to cartAlcad MD-531 – Serie 951: Modulator wideband bg standard stereo.
TV modulator with stereo audio, which generates an analogue TV channel from the audio and video signals. The generated channel is mixed with the rest of the channels of the TV installation. It modulates the output channel for any channel of the terrestrial band based on the the B/G CCIR standard.
Applications
It modulates the audio and video signal of a satellite receiver, DVD, video or surveillance camera, in order to distribute it in the TV installation of the house. The audio and video signals are obtained from the scart connector of the video.
Characteristics
The output channel can be selected by means of switches. Essential features of this equipment are the high carrier to noise ratio together with a very reduced spurious level in the band. Modulation in DSB double side band. F type connector and RCA connector for audio/ video.
Downloads
Technical specification
Technical specification
Manuals
– pdf 243.71 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Add to cartAlcad ME-213 – Serie 902: Double multiplexer tv-sat for indoor use.
Double multiplexer that combines the terrestrial TV and FM radio signals with two separate satellite IF signal from two LNBs. The two resulting signals are distributed each one a single coaxial cable. It can be also used as a diplexer for terrestrial TV and satellite IF signals coming from a single cable. SIngle and double multiplexer
Applications
Designed for TV installations with two coaxial cables in which distribution to the dwellings is performed with two coaxial cables. SMATV satellite and terrestrial TV installations. It is used to combine the signals after amplifying at the head of the installation, or it is used as a separator to distribute terrestrial and satellite TV signals to different points.
Characteristics
Shielded zamak chassis and type F connectors. DC Path to the SAT input to power and switch the LNB.
Accessories
9120039 CM-004 F male connector for coaxial **6.6 mm. 9080023 MC-302 F male connector for coaxial **7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 166.76 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Alcad ME-214 Multiplexer 2 inputs, tv-sat
KSh3,920.00Add to cartAlcad ME-214 – Serie 902: Multiplexer 2 inputs, tv-sat.
Multiplexer that combines the terrestrial TV and FM radio signals with the satellite IF signal from the LNB. The resulting signal is distributed by a single coaxial cable. It can be also used as a separator for terrestrial TV and satellite IF signals coming from a single cable.
Applications
Satellite and terrestrial TV installations of collective type. It is used to combine the signals after amplifying at the head of the installation, or it is used as a separator to distribute terrestrial and satellite TV signals to different points.
Characteristics
Shielded zamak chassis and type F connectors. DC Path to the SAT input to power and switch the LNB.
Accessories
9120039 CM-004 F male connector for coaxial **6.6 mm. 9080023 MC-302 F male connector for coaxial **7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 166.76 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Alcad MM-200 Multiplexer tv/fm-tv/fm mast
KSh4,090.00Add to cartAlcad MM-200 – Serie 902: Multiplexer tv/fm-tv/fm mast.
2 input multiplexer which can be used as a 2 output terrestrial TV splitter, for mast installation (see page 44).
Downloads
Technical specification
Technical specification
Manuals
– pdf 126.41 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-200 pdf 64.01 KB
Technical specifications
-
Alcad MM-207 Multiplexer uhf-vhf/fm mast
KSh2,820.00Add to cartAlcad MM-207 – Serie 902: Multiplexer uhf-vhf/fm mast.
Multiplexers for masts, universal or by bands, of two inputs. They mix the signals from several antennas in a single coaxial cable. They incorporate switchable DC paths to permit the feeding of a preamplifier.
Applications
Individual digital and analogue terrestrial TV installations. In installations where the reception levels are adequate (60 to 75 dB**V) the signals of all the antennas can be combined to distribute them in the building with a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Fixed to the mast by means of a polyamide clamp. F-type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for **6.6mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, **7.0 mm
Downloads
Technical specification
Technical specification
Manuals
– pdf 126.41 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-207 pdf 64.01 KB
Technical specifications
-
Alcad MM-214 Multiplexer/splitter tv-sat
KSh5,372.00Add to cartAlcad MM-214 – Serie 902: Multiplexer/splitter tv-sat.
Multiplexers for masts which combine the signals of terrestrial TV and FM radio with the IF satellite signal from the LNB. The resulting signal is distributed by a single coaxial cable.
Applications
Individual or SMATV installations. The mast multiplexer enables the distribution of the satellite signal to the interior of the building when it is not possible to add a new cable for the satellite.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Fixed to the mast by means of a polyamide clamp. F-type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for **6.6mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, **7.0 mm
Downloads
Technical specification
Technical specification
Manuals
– pdf 166.76 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-214 pdf 64.01 KB
Technical specifications
-
Add to cartAlcad MM-303 – Serie 902: Multiplexer 3 inp, uhf-biii-fm with dc.
Multiplexers for masts, or by bands, of three inputs. They mix the signals from several antennas in a single coaxial cable.
Applications
Individual digital and analogue terrestrial TV installations. In installations where the reception levels are adequate (60 to 75 dB**V) the signals of all the antennas can be combined to distribute them in the building with a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Fixed to the mast by means of a polyamide clamp. F-type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for **6.6mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, **7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 126.41 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-303 pdf 64.01 KB
Technical specifications
-
Alcad MM-307 Multiplexer uhf-uhf-vhf/fm mast
KSh3,618.00Add to cartAlcad MM-307 – Serie 902: Multiplexer uhf-uhf-vhf/fm mast.
Multiplexers for masts, or by bands, of three inputs. They mix the signals from several antennas in a single coaxial cable.
Applications
Individual digital and analogue terrestrial TV installations. In installations where the reception levels are adequate (60 to 75 dB**V) the signals of all the antennas can be combined to distribute them in the building with a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Fixed to the mast by means of a polyamide clamp. F-type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for **6.6mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, **7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 126.41 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-307 pdf 64.01 KB
Technical specifications
-
Alcad PA-740 Broadband amplifier himalaya
KSh45,026.00Add to cartAlcad PA-740 – Serie 912: Broadband amplifier himalaya.
Broadband amplifier for 912-TM himalaya transmodulators. It has one input to amplify the signal coming from all the modules of the installation, and a mutliplexing input for the rest of the channels of the installation. The output level can be controlled by means of an attenuator.
Downloads
Technical specification
Technical specification
Manuals
PA-740 Manual pdf 2.11 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – PA-740 pdf 61.29 KB
Technical specifications
-
Read moreAlcad PR-200 – Serie 909: 14 db uhf preamplifier remote feed.
14dB UHF preampli**er, remote-fed at 24 Vdc with F type connectors.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad PR-201 – Serie 909: 14 db uhf preamplifier.
14 dB UHF preamplifier, with Faston connector to be powered at 24Vdc.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad PR-310 – Serie 909: Preamplifier 5-2400 mhz 10 db.
10dB 5-2400MHz preampli**er with dc path, remote-fed at 13/18Vdc with F type connectors.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad PZ-010 Fast ”f” connector plug bridge
KSh1,028.00Add to cartAlcad PZ-010 – Serie 905: Fast ”f” connector plug bridge.
Multiplexing and diplexing bridge with high-speed male F-type connector, to combine the signal of the modules or for the distribution of the signal from one antenna to several modules. For equipment with prototype connector.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad PZ-020 – Serie 905: ”f” male iec **9,52mm plug bridge.
Multiplexing and diplexing bridge with F-type male connector and IEC male **9.52 mm connector for combining signals from all modules or for distributing the signal from one antenna to several modules. Can be used to add a module to or to replace a module with IEC connector using modules with F-type connector.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad RB-900 – Serie 909: Lte700 c48 & gsm rejection filter 60 db.
Rejection filter for head-end, cutting out interference from LTE700, LTE800, GSM and TETRA mobile phone signals. It incorporates a DC path to allow power to be supplied to a preamplifier.
Applications
Suitable for individual and collective terrestrial TV installations which are affected by the transmission of LTE700 and LTE800 mobile phone signals in the 703-862 MHz band, and by the transmission of GSM and TETRA signals in the 870-960 MHz band. The filter eliminates interference signals before amplification of the TV signals in the head-end of the installation, obtaining a rejection in the LTE700 and LTE800 band of up to -60dB.
Characteristics
Shielded zamak chassis, metal-plated, with F-type connectors. Connectors situated at opposite sides to facilitate connections. Its compact design means it can be installed in a 100 x 100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 1.05 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
-
Alcad RM-075 Shielded load 75 ohm
KSh848.00Add to cartAlcad RM-075 – Serie 905: Shielded load 75 ohm.
75** load with shielded **9.52 mm male IEC connector. The loads are used to close the unused outputs, avoiding the formation of standing waves which affect the levels of the channels.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad RS-275 – Serie 912: 75 ohm load (for f connector).
F charge of 75 ** to charge the unused inputs 9120011 and outputs..
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad SP-122 – Serie 905: Frame for power supply unit and 4 mod.
Support frame for power supply unit and 4 modules. For increasing the size of an installation or installing SAT amplifiers for the four polarities of a satellite.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Add to cartAlcad SP-123 – Serie 905: Frame for power supply unit and 7 mod.
Support frame for power supply unit and 7 modules. Required for mounting the different modules of the equipment.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Add to cartAlcad SP-126 – Serie 905: Frame for power supply unit and 12 mod.
Support frame for power supply unit and 12 modules. Required for mounting the different modules of the equipment.
Downloads
Technical specification
Technical specification
Manuals
– pdf 514.48 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad SP-226 Frame d38 for psu and 11 modules
KSh5,752.00Add to cartAlcad SP-226 – Serie 912: Frame d38 for psu and 11 modules.
Support frame for power supply unit, amplifier and 10 modules or power supply unit and 11 modules. Other combinations include 2 power supply units, an amplifier and 8 modules, or 2 power supply units and 9 modules. Required for mounting the different modules of the equipment.
Downloads
Technical specification
Technical specification
Manuals
– pdf 1.28 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad SP-243 – Serie 912: Frame d47 for psu and 6 modules.
Support frame for power supply unit, amplifier and 6 modules or power supply unit and 5 modules, distance 47 mm. Required for mounting the different modules of the equipment.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Read moreAlcad SP-244 – Serie 912: Frame d47 for psu and 9 modules.
Support frame for 912-series headends. It can hold up to one power supply, one amplifier and 8 modules, or one power supply and 9 modules. There is a 47 mm distance between modules to allow for better heat disipation.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Alcad SP-245 Frame d47 for 2 psu and 8 modules
KSh5,870.00Add to cartAlcad SP-245 – Serie 912: Frame d47 for 2 psu and 8 modules.
Support frame for 912-series headends with redundant power supplies. It can hold up to 2 power supplies, one amplifier and 7 modules, or 2 power supplies and 8 modules. There is a 47 mm distance between modules to allow for better heat disipation.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Alcad SP-725 Frame d38 19” rack psu and 9 modules
KSh12,240.00Add to cartAlcad SP-725 – Serie 912: Frame d38 19” rack psu and 9 modules.
Support frame for 19** rack with a capacity for a power supply unit, amplifier and 8 modules or power supply unit and 9 modules. Required for mounting the different modules of the equipment on a 19** rack.
Downloads
Technical specification
Technical specification
Manuals
– pdf 133.23 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad SP-743 Frame d47 19 rack psu and 7 modules
KSh12,240.00Add to cartAlcad SP-743 – Serie 912: Frame d47 19 rack psu and 7 modules.
Support frame for 19** rack with a capacity for a power supply unit, amplifier and 8 modules or power supply unit and 7 modules, distance 47 mm. Required for mounting the different modules of the equipment on a 19** rack.
Downloads
Technical specification
Technical specification
Manuals
– pdf 133.23 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Alcad TM-101 Dvb-s/s2/t/t2 to t/c transmod himalaya
KSh148,750.00Add to cartAlcad TM-101 – Serie 912: Dvb-s/s2/t/t2 to t/c transmod himalaya.
himalaya transmodulator of DVB-S/S2 satellite digital television services or DVB-T/T2 terrestrial digital television to DVB-T or DVB-C. Each module selects the services of a DVB-S/S2 satellite transponder or a DVB-T/T2 terrestrial channel and includes them in a DVB-T or DVB-C channel. Can be configured using a web browser in a computer conected via ethernet cable.
Downloads
Technical specification
Technical specification
Manuals
TM-101 Manual pdf 2.11 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 912-TM pdf 61.42 KB
Firmware
Firmware TM-101 v3.05 zip 26.33 MB
Other documents
TECHNICAL INFORMATION pdf 325.27 KB
Technical specifications
-
Alcad TM-102 2xdvb-s/s2/t/t2 to dvb-t/c transmod
KSh216,332.00Add to cartAlcad TM-102 – Serie 912: 2xdvb-s/s2/t/t2 to dvb-t/c transmod.
himalaya transmodulator of DVB-S/S2 satellite digital television services or DVB-T/T2 terrestrial digital television to DVB-T or DVB-C. Each module selects services from two DVB-S/S2 satellite transponders or DVB-T/T2 terrestrial channels and includes them in a DVB-T or DVB-C channel. Can be configured using a web browser in a computer conected via ethernet cable.
Downloads
Technical specification
Technical specification
Manuals
TM-102 Manual pdf 2.85 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 912-TM pdf 61.42 KB
Firmware
Firmware TM-102 v3.05 zip 26.52 MB
Other documents
TECHNICAL INFORMATION pdf 325.27 KB
Technical specifications
-
Alcad TM-111 Dvb-s/s2/t/t2 to t/c transm ci himalaya
KSh181,208.00Add to cartAlcad TM-111 – Serie 912: Dvb-s/s2/t/t2 to t/c transm ci himalaya.
himalaya transmodulator of DVB-S/S2 satellite digital television services or DVB-T/T2 terrestrial digital television to DVB-T or DVB-C. Each module selects the services of a DVB-S/S2 satellite transponder or a DVB-T/T2 terrestrial channel and includes them in a DVB-T or DVB-C channel.
Equipped with a Common Interface slot for insertion of the CAM and the subscriber’s card for encripted services. Can be configured using a web browser in a computer conected via ethernet cable.
Downloads
Technical specification
Technical specification
Manuals
TM-111 Manual pdf 2.11 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 912-TM pdf 61.42 KB
Firmware
Firmware TM-111 v3.06 zip 26.33 MB
Other documents
TECHNICAL INFORMATION pdf 325.27 KB
Technical specifications
-
Alcad TM-112 2xdvb-s/s2/t/t2 to dvb-t/c transmod ci
KSh259,478.00Add to cartAlcad TM-112 – Serie 912: 2xdvb-s/s2/t/t2 to dvb-t/c transmod ci.
himalaya transmodulator of DVB-S/S2 satellite digital television services or DVB-T/T2 terrestrial digital television to DVB-T or DVB-C. Each module selects services from two DVB-S/S2 satellite transponders or DVB-T/T2 terrestrial channels and includes them in a DVB-T or DVB-C channel. Can be configured using a web browser in a computer conected via ethernet cable.
Equipped with a Common Interface slot for insertion of the CAM and the subscriber’s card for encripted services. Can be configured using a web browser in a computer conected via ethernet cable.
Downloads
Technical specification
Technical specification
Manuals
TM-112 Manual pdf 2.85 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 912-TM pdf 61.42 KB
Firmware
Firmware TM-112 v3.06 zip 26.51 MB
Other documents
TECHNICAL INFORMATION pdf 325.27 KB
Technical specifications
-
Alcad TM-202 2xdvb-s/s2/t/t2 to 2xdvb-t/c transmod
KSh251,678.00Add to cartAlcad TM-202 – Serie 912: 2xdvb-s/s2/t/t2 to 2xdvb-t/c transmod.
himalaya transmodulator of DVB-S/S2 satellite digital television services or DVB-T/T2 terrestrial digital television to DVB-T or DVB-C. Each module selects services from two DVB-S/S2 satellite transponders or DVB-T/T2 terrestrial channels and includes them in one or two DVB-T or DVB-C channels. Can be configured using a web browser in a computer conected via ethernet cable.
Downloads
Technical specification
Technical specification
Manuals
TM-202 Manual pdf 2.85 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 912-TM pdf 61.42 KB
Firmware
Firmware TM-202 v3.05 zip 26.62 MB
Other documents
TECHNICAL INFORMATION pdf 325.27 KB
Technical specifications
-
Alcad TMS-204 4xdvb-s/s2/s2x to 2xdvb-t/c transmod
KSh272,218.00Add to cartAlcad TMS-204 – Serie 912: 4xdvb-s/s2/s2x to 2xdvb-t/c transmod.
Himalaya transmodulator of DVB-S/S2 satellite digital television services to DVB-T or DVB-C. Each module selects services from four DVB-S/S2 satellite transponders and includes them in two DVB-T or DVB-C channels. The demodulators are Multistream compatible. Can be configured using a web browser in a computer conected via ethernet cable.
Downloads
Technical specification
Technical specification
Manuals
TMS-204 HN pdf 808.48 KB
TMS-204 Manual pdf 3.79 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – TMS-204 TMS-214 pdf 70.78 KB
Firmware
Firmware TMS-204 v1.06 zip 28.44 MB
Other documents
TECHNICAL INFORMATION pdf 325.27 KB
Technical specifications
-
Alcad TMS-214 4xdvb-s/s2/s2x to 2xdvb-t/c transmod, ci
KSh313,306.00Add to cartAlcad TMS-214 – Serie 912: 4xdvb-s/s2/s2x to 2xdvb-t/c transmod, ci.
Himalaya transmodulator of DVB-S/S2 satellite digital television services to DVB-T or DVB-C. Each module selects services from four DVB-S/S2 satellite transponders and includes them in two DVB-T or DVB-C channels. The demodulators are Multistream compatible. Can be configured using a web browser in a computer conected via ethernet cable.
Equipped with a Common Interface slot for insertion of the CAM and the subscriber’s card for encripted services.
Downloads
Technical specification
Technical specification
Manuals
TMS-214 HN pdf 808.48 KB
TMS-214 Manual pdf 3.79 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – TMS-204 TMS-214 pdf 70.78 KB
Firmware
Firmware TMS-214 v1.07 zip 28.46 MB
Other documents
TECHNICAL INFORMATION pdf 325.27 KB
Technical specifications
-
Alcad VE-500 Fan for cabinet 230 vac
KSh6,216.00Add to cartAlcad VE-500 – Serie 905: Fan for cabinet 230 vac.
Ventilator for CP-710 cabinet – this may be required in warm environments to keep the equipment within its operating temperature margins.
Downloads
Technical specification
Technical specification
Manuals
– pdf 267.27 KB
– pdf 1.28 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad ZF-712 If amplifier, 0/13/18 vdc, 0/22 khz
KSh21,894.00Add to cartAlcad ZF-712 – Serie 905: If amplifier, 0/13/18 vdc, 0/22 khz.
IF broadband amplifier for one polarity which amplifies the IF band from an LNB and mixes the terrestrial TV signal coming from the rest of the equipment. It feeds the LNB with the power voltage and 22 KHz signal required to obtain the desired polarity.
Applications
SMATV installations requiring the distribution of one satellite polarity together with the rest of the terrestrial TV channels. The distribution is made in the terrestrial TV band and the satellite IF band. Especially appropriate for bouquets which have all their transponders in a singe polarity.
Characteristics
This module is compatible with the rest of the range of 905-ZG TV equipment. It allows the distribution of the terrestrial TV and satellite signals in a unified form from a single piece of equipment.
Downloads
Technical specification
Technical specification
Manuals
– pdf 327.17 KB
– pdf 486.69 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – ZF-712 pdf 68.66 KB
Technical specifications
-
Alcad ZG-211 Bii(fm) broadband amplifier, 53 db
KSh13,188.00Add to cartAlcad ZG-211 – Serie 905: Bii(fm) broadband amplifier, g=53 db.
Analogue FM and DAB radio broadband amplifier which amplifies the entire FM or DAB radio band. Amplifies the whole FM or DAB radio band. High gain and output level. The ZG-611 amplifier amplifies the DAB digital radio by groups of channels (which should be specified when ordering). The FM amplifier is also available for OIRT frequencies (when ordering model ZG-611, please specify FM OIRT if required).
Applications
MATV installations that include FM or DAB radio distribution.
Characteristics
This module is compatible with other equipment for TV in the 905- ZG range. It allows distribution of FM and DAB radio and of television signals to be combined using a single piece of equipment. Attenuator by means of active MOSMIC regulator to reduce the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
– pdf 201.67 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – ZG-211 pdf 68.66 KB
Technical specifications
-
Alcad ZG-212 Radio amplifier dab, 50 db
KSh15,678.00Add to cartAlcad ZG-212 – Serie 905: Radio amplifier dab, g= 50 db.
Analogue FM and DAB radio broadband amplifier which amplifies the entire FM or DAB radio band. Amplifies the whole FM or DAB radio band. High gain and output level. The ZG-611 amplifier amplifies the DAB digital radio by groups of channels (which should be specified when ordering). The FM amplifier is also available for OIRT frequencies (when ordering model ZG-611, please specify FM OIRT if required).
Applications
MATV installations that include FM or DAB radio distribution.
Characteristics
This module is compatible with other equipment for TV in the 905- ZG range. It allows distribution of FM and DAB radio and of television signals to be combined using a single piece of equipment. Attenuator by means of active MOSMIC regulator to reduce the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
– pdf 201.67 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – ZG-212 pdf 68.66 KB
Technical specifications
-
Alcad ZG-402 Two channel amplifier
KSh21,666.00Add to cartAlcad ZG-402 – Serie 905: Two channel amplifier.
Multichannel amplifier for the UHF band designed to work with a group of adjacent channels. Each module permits the amplification and equalisation of two to four channels. The level of the group of channels can be adjusted but not each channel independently. High gain and output level. The initial channel of the group should be specified in the order.
Applications
Large digital and analogue terrestrial MATV installations where adjacent analogue or digital channels exist. Recommended for use in areas of reception where the relation in levels between analogue and digital channels is constant. Normally used to amplify one analogue channel along with several digital channels.
Characteristics
Each module consists of a three-stage input filter, an amplifier and an output filter which is three-stage, the filters are cavities. Filters remain highly stable with variations in temperature. Attenuator using an active MOSMIC regulator reduces the noise figure. 20dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 261.76 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration ZG-402 pdf 48.63 KB
-
Alcad ZG-412 Two channel amplifier uhf, 53 db
KSh21,252.00Add to cartAlcad ZG-412 – Serie 905: Two channel amplifier uhf, g=53 db.
Multichannel amplifier for the UHF band designed to work with a group of adjacent channels. Each module permits the amplification and equalisation of two to four channels. The level of the group of channels can be adjusted but not each channel independently. High gain and output level. The initial channel of the group should be specified in the order.
Applications
Large digital and analogue terrestrial MATV installations where adjacent analogue or digital channels exist. Recommended for use in areas of reception where the relation in levels between analogue and digital channels is constant. Normally used to amplify one analogue channel along with several digital channels.
Characteristics
Each module consists of a three-stage input filter, an amplifier and an output filter which is three-stage, the filters are cavities. Filters remain highly stable with variations in temperature. Attenuator using an active MOSMIC regulator reduces the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 204.95 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration ZG-412 pdf 48.63 KB
Technical specifications
-
Alcad ZG-413 Three channel amplifier uhf, 53 db
KSh21,252.00Add to cartAlcad ZG-413 – Serie 905: Three channel amplifier uhf, g=53 db.
Multichannel amplifier for the UHF band designed to work with a group of adjacent channels. Each module permits the amplification and equalisation of two to four channels. The level of the group of channels can be adjusted but not each channel independently. High gain and output level. The initial channel of the group should be specified in the order.
Applications
Large digital and analogue terrestrial MATV installations where adjacent analogue or digital channels exist. Recommended for use in areas of reception where the relation in levels between analogue and digital channels is constant. Normally used to amplify one analogue channel along with several digital channels.
Characteristics
Each module consists of a three-stage input filter, an amplifier and an output filter which is three-stage, the filters are cavities. Filters remain highly stable with variations in temperature. Attenuator using an active MOSMIC regulator reduces the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 204.95 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration ZG-413 pdf 48.63 KB
Technical specifications
-
Alcad ZG-414 Four channel amplifier uhf, 53 db
KSh21,252.00Add to cartAlcad ZG-414 – Serie 905: Four channel amplifier uhf, g=53 db.
Multichannel amplifier for the UHF band designed to work with a group of adjacent channels. Each module permits the amplification and equalisation of two to four channels. The level of the group of channels can be adjusted but not each channel independently. High gain and output level. The initial channel of the group should be specified in the order.
Applications
Large digital and analogue terrestrial MATV installations where adjacent analogue or digital channels exist. Recommended for use in areas of reception where the relation in levels between analogue and digital channels is constant. Normally used to amplify one analogue channel along with several digital channels.
Characteristics
Each module consists of a three-stage input filter, an amplifier and an output filter which is three-stage, the filters are cavities. Filters remain highly stable with variations in temperature. Attenuator using an active MOSMIC regulator reduces the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
– pdf 204.95 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration ZG-414 pdf 48.63 KB
Technical specifications
-
Alcad ZG-421 Ampli uhf adjacent 50db
KSh20,354.00Add to cartAlcad ZG-421 – Serie 905: Ampli uhf adjacent g=50db.
Monochannel amplifier for the UHF band designed to work with adjacent channels. It has a high selectivity which permits the independent equalisation of each adjacent channel. High gain and output level. The channel should be specified in the order.
Applications
Large, digital and analogue terrestrial MATV installations where adjacent analogue or digital channels exist. The different channels can be treated independently with this module which results in a perfect equalisation of all the received channels.
Characteristics
Specific design for adjacent channels, an optimum compromise between image and sound quality and equalisation capability can be achieved due to the high selectivity of the equipment. Each module consists of 3 input filters, amplifier and 2 output filters ** all the filters are cavities. There is an attenuator between stages to reduce the noise figure. Supplied with the multiplexing and diplexing bridges and power cable.
Downloads
Technical specification
Technical specification
Manuals
– pdf 165.67 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration ZG-421 pdf 48.63 KB
-
Alcad ZG-431 Single channel adjacent amp. uhf, 52db
KSh19,956.00Add to cartAlcad ZG-431 – Serie 905: Single channel adjacent amp. uhf, g=52db.
Monochannel amplifier for the UHF band designed to work with adjacent channels. It has a high gain and output level. The channel should be specified in the order.
Applications
Large, digital and analogue terrestrial MATV installations where adjacent analogue or digital channels exist. The different channels can be treated independently with this module, which results in a perfect equalisation of all the received channels.
Characteristics
Each module consists of a three-stage input filter, an amplifier and an output filter which is three-stage, the filters are cavities. Filters remain highly stable with variations in temperature. Attenuator using an active MOSMIC regulator reduces the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
– pdf 201.67 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration ZG-431 pdf 48.63 KB
Technical specifications
-
Alcad ZG-611 Ampli bi,biii interbands, 52 db
KSh15,982.00Add to cartAlcad ZG-611 – Serie 905: Ampli bi,biii interbands, g=52 db.
Analogue FM and DAB radio broadband amplifier which amplifies the entire FM or DAB radio band. Amplifies the whole FM or DAB radio band. High gain and output level. The ZG-611 amplifier amplifies the DAB digital radio by groups of channels (which should be specified when ordering). The FM amplifier is also available for OIRT frequencies (when ordering model ZG-611, please specify FM OIRT if required).
Applications
MATV installations that include FM or DAB radio distribution.
Characteristics
This module is compatible with other equipment for TV in the 905- ZG range. It allows distribution of FM and DAB radio and of television signals to be combined using a single piece of equipment. Attenuator by means of active MOSMIC regulator to reduce the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
– pdf 201.67 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – ZG-611 pdf 68.66 KB
Technical specifications
-
Alcad ZP-002 Plug bridge
KSh1,028.00Add to cartAlcad ZP-002 – Serie 905: Plug bridge.
Multiplexing bridge, to combine the signal of all the modules.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
-
Add to cartHigh gain mast amplifier (LTE700, 2nd Digital Dividend). 1 input: FM/BIII/DAB/UHF. Mast-mounted amplifier to amplify terrestrial television signals from an antenna. It consists of a single input with amplification in several bands. The amplifier is powered at 24Vdc through the output coaxial cable.
-
Add to cartHigh gain mast amplifier (LTE700, 2nd Digital Dividend). 3 inputs: FM-BIII/DAB-UHF. Mast-mounted amplifier to amplify terrestrial television signals from various antennas. It consists of 3 inputs with amplification in all bands. The amplifier is powered at 24Vdc through the output coaxial cable.
-
Add to cartHigh gain mast amplifier (LTE700, 2nd Digital Dividend). 4 inputs: FM-BIII/DAB-UHF-UHF. Mast-mounted amplifier to amplify terrestrial television signals from various antennas. It consists of 4 inputs with amplification in all bands. The amplifier is powered at 24Vdc through the output coaxial cable.
-
IFS 247 (FI) LTE 700 SAT-TER Triax Amplifier
KSh7,826.00Add to cartAmplifier 1 input – 2 outputs
Input frequency 5 … 2150 MHz
Output 1 gain = 25dB Sat / 20 Terr.
Output 2 gain = 17dB Sat. / 12dB Terr)
Output level 114 dB**V.,
Current flow in FI., Independent regulation of the output level in RF and FI
-
-
Johansson 1352 Mixer 3 inputs
KSh2,532.00 -
Add to cartLTE 700 (4G) filter: 30dB rejection of UHF channels 50-69 (indoor) 5-694 MHz
Features
30 dB LTE rejection
in-line small housing
indoor use
Specifications
Reference 6023C48
Frequency range MHz 5-694
Cut off channel – 48
Insertion loss dB 1
LTE (4G) rejection CH50 – 69 dB 30
GSM rejection dB 25
DC power pass mA 500
Connectors – 2 x F female
Mounting – Indoor Use
Dimensions mm 72 x 22 x 17 -
Add to cartLTE_694 (4G-5G) filter: 40dB rejection of UHF channels 50-69 (indoor and outdoor) 5-694 MHz
Features
High LTE (4G/5G) rejection
Idoor and outdoor mountable
Specifications**
** ** 6024C48
Frequency range MHz 5-694
Cut off channel – 48
Insertion loss dB 2.5
LTE rejection (4G) dB 40
GSM rejection dB 15
DC power pass mA 500
Connectors ** 2 x F female
Mounting ** Indoor / outdoor use (indoor flange provided)
Dimensions mm 112 x 98 x 56
** -
Add to cartThis model replaces the Johansson 7322
Mast Amplifier UHF 25dB LTE2 (5G)
Characteristics
1 input / 1 output
Frequency range: 470 ..694MHz (C21 ..C48)
LTE rejection (5G)
Ultra low noise
Gain: 10-25 dB (adjustable)
High selectivity
Built-in GSM trap
Power indicator LED
Pole or wall mount
Specifications
7322L2
Frequency range MHz 470 – 694 (ch. 21-48)
Gain dB 10-25 adj
Noise figure dB 2.0
Max. input level dB**V 80
Max. output level dB**V 100
Power supply VDC 24
Consumption mA 35
Dimensions mm 120 x 115 x 50 -
Add to cartUHF Preamplifier (LTE/5G): 35dB 24V
Features
1 input/1 output
LTE (5G) rejection
low-noise
15-35 dB adjustable gain
power indication LED
24 VDC operating voltage
Specifications
** ** 7329
Frequency range MHz 470-694 (Ch. 21-48)
Gain dB 15 – 35
Noise figure dB 3.5
Input level dB**V 82
Output level dB**V 104
Power supply VDC 24
Consumption mA 35
Dimensions mm 120 x 115 x 50 -
Johansson 9506 Mixer 1e+Sat Ext
KSh2,398.00 -
-
-
Add to cartMast Amplifier Kit 7329 + Power Supply 2436.
Features
7329 Mast Amplifier Kit
1 input / 1 output
5G LTE rejection
Low noise
Adjustable gain 15 – 35 dB
LED power indicator
Working voltage 24 VDC
Power Supply 2436
Entries: 1
Outputs: 2
Insertion loss dB 4-5
Isolation between outputs dB 10
Input voltage/Frequency/Consumption – 100-230 V~ / 50 Hz / 4.6 W
Efficiency level – VI
Output voltage VDC 24
Output current mA 150
Dimensions mm 95 x 76 x 35
Specifications
Preamplifier
7329
Frequency range MHz 470-694 (Ch. 21-48)
Gain dB 15 – 35
noise figure dB 3.5
Input level dB**V 82
Output level dB**V 104
power supply VDC 24
Consumption mA 35
Dimensions mm 120x115x50
Power supply
2436
Outputs – 2
Insertion loss dB 4-5
Isolation between outputs dB 10
AC input voltage/Frequency/Power – 100-230 V~ / 50 Hz / 4.8 W
Efficiency level – SAW
DC output voltage VDC 24
Output current mA 150
Dimensions mm 95x76x35 -
Line amplifier 1in/1out UHF/FI 2,5/20dB + DC Televes
KSh11,510.00Add to cartThey are fed through the coaxial cable from the receiver or by a power injector. Zamak chassis. Connection “F”.
-
Add to cartMast installation amplifier to amplify terrestrial television signals from various antennas. It consists of 2 inputs with amplification in all bands. The amplifier is powered at 12Vdc through the output coaxial cable. NETWORK compliant.
-
Add to cartMast installation amplifier to amplify terrestrial television signals from various antennas. It has 3 inputs with amplification in all bands. The amplifier is powered at 12Vdc through the output coaxial cable. NETWORK compliant.
-
Mixer-Spliter 2FI-2D ICT Televes 740710
KSh10,026.00Add to cartAre housed in a die-cast chassis with **F** connectors; Allow the passage of current from the SAT IF output to the input; The 7452 reference may also be used as a filter for GSM telephony, thanks to its high rejection TV-IF; Mast mounting for ref. 7452 using the outdoor case ref. 4163; **F** Connection.
-
Add to cartModular amplifier that allows independent adjustment of the signal received in the DAB or FM band. Both signals are mixed in Z at their output, for compatibility with the rest of the modules in the range. Its format is ideal for mounting in headends, with more amplifiers of the T12 series.
-
-
Add to cartFuente de alimentaci**n conmutada 24V 2.5A**Televes montada en ch**sis universal T.12. Dispone de una salida estabilizada para alimentar cualquier equipo con formato T.12.**
-
Add to cartModule that amplifies the optical signal of 1550nm, generating an output power of 19dBm. Equipped with WDM, it has 1 input of 1310/1490nm with which it multiplexes the 1550nm amplified signal, offering 1 output 1310/1490/1550nm, for use in a GPON header (usually with an OLT512). Televes 234221
-
Add to cartModular amplifier allowing the adjustment of individual UHF channels (DTT), with very high rejection of adjacent channels (>50 dB). 470-862MHz G55dB Vs125dB**V.**Perfect format for headend mounting, with additional T12-series amplifiers.**Televes 509812
-
Triax MFC 104 – UHF/BIII/AM/FM combiner
KSh2,784.00Add to cartMFC 104 – AM/FM/TV combiner. With F-connector for any job. Unique mounting system. Switchable DC-through power. RF shielded.
Specifications
ORDER INFORMATION
EAN Number 5702663401044
CHARACTERISTICS
Type Combiner
FREQUENCY
Input 1 – band UHF
Input 1 – channels 21…69
Input 1 – frequency 470…862 MHz
Input 2 – band VHF
Input 2 – channels 5…12
Input 2 – frequency 175…230 MHz
Input 3 – band AM/FM
Input 3 – channels 1…4
Input 3 – frequency 0.15…108 MHz
LOSS
Input 1 – through loss 2.0 dB
Input 1 – Stop Band Attenuation 20 dB
Input 2 – through loss 1.5 dB
Input 2 – Stop Band Attenuation 20 dB
Input 3 – through loss 1.0 dB
OPERATIONAL
DC Passthrough Yes UHF
CONNECTORS
Connector Type F-female
Number of inputs 3
Number of outputs 1
MECHANICAL
Product Height 117 mm
Product Depth 50 mm
Product Width 120 mm
Colour RAL 7016 – Anthracite grey
Packaging Height 0.001 m
Packaging Width 0.001 m
Packaging Depth 0.001 m
Net Weight 0.237 kg
Total Weight 0.237 kg
Remarks DC throughpower UHF input -
-
Unix XF32 E UHF Antenna
KSh7,188.00Add to cartSpecifications
channels ** 21-69
bandwidth ** BIV/V
elements ** 32
gain dB 12,5
front/back ratio dB 24
horizontal beamwidth ** ** 20
windload N 58
weight Kg 1.45
material ** aluminum
dimensions mm 791×500
connector ** Tipo F
Popular Products
-
Starlink In Person Verification Services In Kenya
KSh3,000.00
-
Starlink Gen 3 Case Compatible with Starlink Gen 3, Waterproof Starlink Standard Case, Shockproof Starlink Carrying Bag for Satellite Dish Accessories, Travel Bag for Camping and RV
-
STARLINK Gen3 Portable Accessory Storage Bag, Outdoor Camping, Portable Handbag, Made Of Polyester Material.
-
Carrying Bag For Starlink V4 Satellite Portable RV Outdoor Travel Bag Rectangular Storage Handbag For Starlink Gen3 Accessory
-
IsatPhone Link 50 Units - 30 Days
Validity
Products
-
Starlink In Person Verification Services In Kenya
KSh3,000.00
-
Starlink Gen 3 Case Compatible with Starlink Gen 3, Waterproof Starlink Standard Case, Shockproof Starlink Carrying Bag for Satellite Dish Accessories, Travel Bag for Camping and RV
-
STARLINK Gen3 Portable Accessory Storage Bag, Outdoor Camping, Portable Handbag, Made Of Polyester Material.
-
Carrying Bag For Starlink V4 Satellite Portable RV Outdoor Travel Bag Rectangular Storage Handbag For Starlink Gen3 Accessory
-
IsatPhone Link 50 Units - 30 Days
Validity
