MikroTik OmniTIK 5
7.5dBi Integrated AP, 5GHz Dual chain, 5xEthernet ports
OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas – the perfect companion for our SXT, or for any other 802.11 standard device. Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput. LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal – or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive. The OmniTIK runs RouterOS with all it’s features Box contains: OmniTik U-5HnD, mounting loops, PoE injector, power adapter – RBOmniTikU-5HnD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. – RBOmniTikU-5HnD (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). Send purchase questions Specifications Support & Downloads Gallery Test results Specifications Details Product code RBOmniTikU-5HnD Architecture MIPSBE CPU AR9344 CPU core count 1 CPU nominal frequency 600 MHz Switch chip model AR9344 Dimensions 368x125x55mm RouterOS license 4 Operating System RouterOS v5 and above Size of RAM 64 MB Storage size 16 MB Storage type FLASH MTBF Approximately 100’000 hours at 25C Tested ambient temperature -40°C to 70°C Suggested price $89.00 Powering Details Number of DC inputs 1 (PoE-IN) Max power consumption 11 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 11-30 V Wireless specifications Details Wireless 5 GHz Max data rate 300 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n Antenna gain dBi for 5 GHz 7.5 Wireless 5 GHz chip model AR9344 Wireless 5 GHz generation Wi-Fi 4 Ethernet Details 10/100 Ethernet ports 5 Peripherals Details Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 Other Details Beeper Yes Certification & Approvals Details Certification CE, FCC, IC, EAC, ROHS IP IP54 Wireless specifications 5 GHz Transmit (dBm) Receive Sensitivity 6MBit/s 30 -96 54MBit/s 27 -78 MCS0 30 -96 MCS7 26 -75 Included parts Metal ring (one) PoE injector 24V 0.8A power adapter Pole mounting bracket The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase.. Related products QMP $9.5
Related products
-
Add to cartBracket for starlinks, fixed mounting on
eaves, walls, roofs, J-tube design to extend the distance between starlinks
and walls for receiving satellite signals. Easy to install, the base is
mounted with 2 types of screws, self-tapping screws for wood and expansion
screws for masonry and stone, the bracket and the base are fastened with
hexagonal screws. 2-way mountable, multi-angle adjustable for different
places, bracket fits Dish perfectly Material: steel + black coating, sturdy
and durable, with good weather resistance, wind resistance and strong load
bearing capacity. -
Add to cart[(Durable for Indoor/Outdoor Use)] –
Durable sheath, waterproof and rainproof, suitable for indoor and outdoor.
[(Great for Starlink Gen 2)] – It seamlessly integrates with the original
Starlink V2 Standard Actuated/High Performance/Flat High Performance
Satellite Cable, this replacement cable guarantees interference-free
connectivity and non-disruptive repairs. [(Plug and Play)] – Plug and play
functionality for effortless installation, providing convenience and ease of
setup without the need for complicated procedures. [(Faster Data
Transmission)] – This Replacement Cable utilizes CAT6 networking cable,
offering quicker data transfer rates and enhanced resistance to interference.
[(Packing List)] – 1 x 150ft transmission cable for Starlink -
Add to cartInput over and under voltage protection.
Reverse polarity protection. Over-current and short-circuit protection.
Overheating protection. Working state LED indication. -
Add to cart[(Durable for Indoor/Outdoor Use)] –
Durable sheath, waterproof and rainproof, suitable for indoor and outdoor.
[(Great for Starlink Gen 2)] – It seamlessly integrates with the original
Starlink V2 Standard Actuated/High Performance/Flat High Performance
Satellite Cable, this replacement cable guarantees interference-free
connectivity and non-disruptive repairs. [(Plug and Play)] – Plug and play
functionality for effortless installation, providing convenience and ease of
setup without the need for complicated procedures. [(Faster Data
Transmission)] – This Replacement Cable utilizes CAT6 networking cable,
offering quicker data transfer rates and enhanced resistance to interference.
[(Packing List)] – 1 x 30ft transmission cable for Starlink -
Add to cartSturdy And : This V2 30ft cable
replacement is made of excellent rubber and red copper material, which is
sturdy and wear resistant, not easy to be damaged, and has a long service
life. Easy To Install: Thanks to its user friendly design, the rectangular
satellite replacement cable can be easily installed without any complicated
procedures, saving your time and energy. Stable Connection: This rectangular
satellite wire replacement ensures a stable, uninterrupted connection so you
can enjoy seamless Internet access. Wide Application: This for Starlink
rectangular V2 30ft cable has a wide range of applications and can be used
for communication systems, automation systems, network connections and so on.
Good Compatibility: This for Starlink satellite cable replacement is
compatible with a wide range of routers, providing versatility and
flexibility.
Reviews
There are no reviews yet.