Bottom section tilting G.C + Painting Red 3m turret series…
KSh748,506.00
3m lower section pivoting for the erection of a 550 XL-series tower. The section is painted red (RAL 3020).?Guy wires are required for pivoting sections. Televes 313911
This product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here
3m lower section pivoting for the erection of a 550 XL-series tower.
The section is painted red (RAL 3020).?
Guy wires are required for pivoting sections.
Highlights
Anchoring system based on plates and union nuts
Outstanding stiffness and mechanical strength
Solid tube, no internal corrosion
Maximum height of the 550 XL tower: 200m (as per calculation conditions)
Features
The hot-dip galvanizing surface treatment provides enhanced durability in adverse corrosion conditions
Colour paint, oven-lacquering with polyester electrostatic powder
Specifications
Reference 313911
Description Bottom section
Color Red (RAL 3020)
Material pipes Steel S235 ? 48 mm esp.
Re min. 215 N / mm2
Rm min. 360/510 N / mm2
Reinforcement material Steel S235 ? 16 mm
Re min. 235 N / mm2
Rm min. 360/510 N / mm2
Material anchoring Steel S235, sheet 20 mm esp.
Re min. 225 N / mm2
Rm min. 360/510 N / mm2
Finish Hot Galvanized + Baked with 60-80 ?m Polyester Electrostatic Powder
Surface facing the wind 0.58 m2 x 1.2 coef. = 0.7 m2
Related products
-
Add to cartSuperficial installation plate on the ground, using stakes, without the need for concrete. Its function is to fix on it (by screwing) a tilting base of the 450 or 550 series (ref. 3134/01 and 3142/01). Characteristic Hot-dip galvanized surface treatment offers greater durability in adverse corrosion conditions Finished in gray
-
Add to cartBlister. Mast clamp ? 25 … 45mm. Zinc + RPR. Shackle composed of a “U” screw and clamp, which can be installed on a mechanical part to fix a mast. Made of steel and highly resistant to corrosion, thanks to its dual galvanized treatment and reactive sealing (RPR).
-
Add to cart1 m upper section for the erection of a 450 XL series tower. The section is painted red (RAL 3020).
-
Add to cartThis product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here
3m Middle Section reinforced for the erection of a 180 tower.
The section is painted white.
Features
Anchoring system with union nuts
Easy and quick mounting
Fully automated soldering
180 tower maximum height: 26.5m (as per calculation conditions)
The hot-dip galvanizing surface treatment provides enhanced durability in adverse corrosion conditions
Colour paint, oven-lacquering with polyester electrostatic powder
White finish
Specifications
Surface facing the wind 0.236 m2 x 1.2 coef. = 0.283 m2 -
Reviews
There are no reviews yet.