Zinc + RPR mast 2m ?40mm thickness 1.25mm Televes
KSh5,044.00
High corrosion resistance steel mast, thanks to its dual galvanized treatment and reactive sealing (RPR). Its grooved design allows it to be assembled and fixed with other poles to extend its length. RPR mast 2m long, diameter ?40mm and thickness 1.25mm. Televes 3041
This product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here
Specifications
Reference 3041
Protection ZN + RPR
Type of lace Fluted
Length m 2
Diameter ? mm 40
Thickness mm 1.25
Color Gray
Zn + RPR: Zinc + “Reagent Protective Coating” (reactive seal).
Zn + P: Zinc + Paint (red or white) with enamel baked with polyester powder
Electrostatics.
GC: hot galvanized.
Related products
-
Amplifier Mast NanoKom 3e/1s EasyF…
KSh11,174.00Add to cartMasthead amplifier for the amplification and combination of terrestrial television and satellite signals coming from several antennas. LTE700.?Equipped with 3 inputs: the BIII/UHF input signal is amplified, whereas the FM and SAT signals are only combined.?Allows DC pass towards the satellite input to power the LNB. Televes?561521
-
Add to cartUHF preamplifier
7412DC
Features
1 x VHF input (BIII/DAB) / 2 UHF inputs
broadband output
Selectable DC current step
Output level up to 112 dB?V
Adjustable gain on VHF 5-23 dB
Adjustable gain on UHF 10-32 dB
LTE (5G) rejection
Very low noise figure
Power LEDs
Operating voltage 12-24 VDC
Wall or mast mount
Specifications -
Add to cartKit consisting of:
Ref. 561621: NanoKom mast amplifier, 3 inputs: UHF-VHFmix-FImix
Mast-mounted amplifier to amplify and mix terrestrial and satellite television signals from various antennas.
It consists of 3 inputs: the signal is amplified at the UHF input, while the VHF and IF (SAT) input are only mixed.
Allows DC pass to the satellite input to power the LNB.
Ref. 5796: PicoKom power supply (for FImix) 12V – 220mA, 1 output
12V (220mA) source, which sends power through the input coaxial cable, allowing the TV signal to pass through. It is sandwiched in the installation to power mast amplifiers or a BOSS system. It is compatible with amplifiers with satellite mixing (FImix), as it automatically detects the existence of an LNB management signal (voltage and tone) generated by a receiver at its output, and lets it pass to its input.
Stands out for
They incorporate “USOS” (User Selectable Output Signal) technology: the installer selects the desired output level, which remains stable. The device adjusts automatically to adapt its gain to variations in the input signal.
Separate amplification and very low noise figure, thus respecting the signal quality
Ultra-slim ergonomic design
EasyF connection system
They can be powered from 12 to 24V
Fully automated manufacturing subjected to rigorous quality controls
High armor chassis, made of Zamak
Main Features
LTE700 / 5G filter to eliminate telephony interference
ON / OFF switch to allow DC through to UHF input, to power a BOSS system
Simple assembly. Flange for fixing to the mast included
Durable orange ABS plastic housing for outdoor installation
EasyF connection system: simplicity and savingsThe EasyF is an innovative concept of connection of the internal conductor of the coaxial (live) cable, which is inserted directly into the device increasing the reliability of the connection. Furthermore, thanks to the absence of “F” connectors, it is possible to reduce the chassis and secure the connection of two cables with a single screw.
Real time savings: speeding up the installation is possible, as it is not necessary to make the connectorization of the coaxial cables. In addition, the process of threading the connectors on the device is avoided, which is sometimes complicated when space is not enough.
Connection reliability: the cable tie that holds the cables prevents the coaxial from loosening
Cost savings: no additional connector (neither “F” nor “CEI”) is required
Space optimization: inputs and outputs are always located on the same side of the device, avoiding bending the coaxial cables and facilitating work inside cabinets and registers
Very simple assembly in three steps: you only need to screw and unscrew the covers to connect two cables:
1. Unscrew the cover of the device to access the connection
2. Insert the previously stripped coaxial cables
3. Close the cover and screw to secure the connection
Find out more about the reliability of the EasyF system
With EasyF, the connection of the coaxial cable in the device is made by means of an automated system of insertion of the live (internal conductor) by contact, without requiring soldering.
Like the first day: the life of the device increases by eliminating the possible deterioration of the welds with the passage of time
Reduced failure rate: generally caused by cold welding
Optimization of electromagnetic behavior: at high frequencies
Reinforcement of our commitment to the environment: pollution caused by the welding process is eliminated and electricity consumption in production is reduced -
Add to cartTOS 08F, 8-way PLC Splitter FC/PC?
The balanced coupler is implemented in a valid metal housing
pre-assembled with FC/PC connectors
PLC (Planar Lightwave Circuit) couplers with a wide window of wave lengths
Low and flat insertion loss
Specifications
CHARACTERISTICS
Type OPTO Coupler balanced
Coupling Ratio (OPTO) 8x 12.5 %
Wavelength 1260…1650 nm
LOSS
Insertion loss (typ.) 10.2 dB
CONNECTORS
Connector Type Optical – FC/PC
Number of inputs 1
Number of outputs 8
MECHANICAL
Dimensions product (H x D x W) 150x20x114 mm
Packing QTY 1
Packaging Height 0,045 m
Packaging Width 0,153 m
Packaging Depth 0,213 m
Packaging Volume 0,001 m3
Net Weight 0,286 kg
Tara Weight 0,064 kg
Total Weight 0,350 kg -
Add to cartVHF/2UHF Preamplifier / 2 Outputs
7413DC
Features
1 x VHF input (BIII/DAB) / 2 UHF inputs
2 broadband outputs
Selectable DC current step
Output level up to 109 dB?V
Adjustable gain on VHF 0-20 dB
Adjustable gain on UHF 8-28 dB
LTE (5G) rejection
Very low noise figure
Power LEDs
Operating voltage 12-24 VDC
Wall or mast mount
Specifications
Reviews
There are no reviews yet.