Alcad EM-211 Custom front plate for bs (not bs-112)
KSh314.00
Alcad EM-211 – Serie 907: Custom front plate for bs (not bs-112).
TV-R/TV-R customised front plate for all BS outlet models except BS-100 and BS-112.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
Related products
-
Read moreAlcad DI-303 – Serie 906: If splitter 3 out with dc path.
3-way splitter for terrestrial and satellite TV, covering all frequencies from 5MHz to 2,400MHz. It distributes all the input signal in equal parts among the 3 outputs. It has a feed path through any of its 3 outputs to the input. The response of the outputs is flat. Also available in 2-, 4-, 6- or 8-way models.
Applications
Individual and collective installations of terrestrial and satellite TV with a star-shaped distribution. They permit power to be fed from a preamplifier or LNB through any of the outputs. In installations with multiswitches, a control voltage can be sent through their outputs.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of splitter chassis.
Downloads
Technical specification
Technical specification
Manuals
DI-303 Manual pdf 923.93 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 906-DI_20210426 pdf 70.31 KB
Technical specifications
-
BT Terminal Board 10 Pairs (Box 5 units) Televes
KSh6,776.00Add to cartThe 10-pair terminal blocks are designed to accommodate and connect up to 10 pairs of telephone cable (2×10 contacts) by displacing their insulation. Supplied in boxes of 5 units.
-
-
Read moreAlcad PT-420 – Serie 907: If user acces point, if splitter 4 out.
User access point for terrestrial and satellite TV. It has two inputs and four outputs. One of the inputs remains connected to the outputs while the other input is permanently connected to a 75 ohm load. Designed for the 5-2,400 MHz frequency range. Also available in 2-, 3-, 5-, 6- and 8-output models.
Applications
Designed for TV installations with two coaxial cables in which distribution to the houses is performed with a single coaxial cable. The signal which is distributed to the house is selected by changing the connections of the coaxial cables at the user access point.
Characteristics
Voltage blockage in the output connectors. No return path. Shielded zamak and metal plate chassis. F type connectors in machined zamak which form part of the chassis. Reduced dimensions.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Reviews
There are no reviews yet.