High gain mast amplifier (one UHF channel) 3 UHF (channel)…
KSh21,320.00
Mast installation amplifier to amplify terrestrial television signals from several antennas. It consists of 3 inputs with UHF band amplification and a single additional UHF channel (on demand), in addition to VHF mixing. The amplifier is powered at 24Vdc through the coaxial output cable. Televes 535340
Mast installation amplifier to amplify terrestrial television signals from several antennas.
It consists of 3 inputs with UHF band amplification and a single additional UHF channel (on demand), in addition to VHF mixing. The amplifier is powered at 24Vdc through the coaxial output cable.
Stands out for
Separate amplification of each band
High gain manual adjustment
EasyF connection system
Fully automated manufacturing and subjected to rigorous quality controls
High armor chassis, manufactured in Zamak
Features
LTE/4G filter to eliminate telephony interference
ON/OFF switches to allow the passage of DC towards the UHF inputs, to feed a BOSS system
Simple assembly Flange for attachment to the mast included
Orange orange plastic ABS case for outdoor installation
?
EasyF connection system: simplicity and savings
The EasyF is an innovative concept of connecting the internal conductor of the coaxial cable (live), which is inserted directly into the device increasing the reliability of the connection. In addition, thanks to the absence of “F” connectors, it is possible to reduce the chassis and secure the connection of two cables with a single screw.
Real time saving: accelerating the installation is possible, since it is not necessary to make the connectorization of the coaxial cables.
In addition, the threading process of the connectors in the device is avoided, which sometimes gets complicated when the space is not enough
Reliability of connection: the flange that holds the cables prevents the coax from coming loose
Economical savings: no additional connector (or “F” or “CEI”) is needed
Optimization of the space: the entrances and exits are always located on the same side of the device, avoiding to bend the coaxial cables and facilitating the work inside cabinets and registers
Very simple assembly in three steps: only it is required to screw and unscrew the covers to connect two cables:
1. Unscrew the lid of the device to access the connection
2. Insert the pre-stripped coaxial cables
3. Close the cover and screw in to secure the connection
Discover more about the reliability of the EasyF system
With EasyF, the connection of the coaxial cable in the device is made by an automated system of insertion of the live (internal conductor) by contact, without requiring welding.
Like the first day: the life time of the device increases when eliminating the possible deterioration of the welds with the passage of time
Reduction of the failure rate: generally produced by cold welding
Optimization of electromagnetic behavior: at high frequencies
Reinforcement of our commitment to the environment: the contamination caused by the welding process is eliminated and the electricity consumption in production is reduced
Specifications
Reference ?535340
?Inputs / Bands ?VHF ?UHF ?UHF (1C) ?SAT
?Frequency range MHz 47-254 470-790 channel?(1) 950-2150
?Gain ?dB -1.5 -5 32 -2
?Output level DIN45004B ?dB?V – – 114 –
?Gain regulation?range dB – – 25 –
?Noise figure ?dB – – 2.8 –
?Power Supply ?Vdc 12…24/50
?Current consumption mA 40
?M?x.?current inputs (2)
mA – 40 – 350
?Protection index IP 23
?Dimensions?(Wide x High x Prof) mm 120 x 130 x 40
1 – Specify channel in the order.
2 – Automatic detection.
Related products
-
Add to cartThe IDLU-UWT110-CUO1O-32P is a small form factor Unicable2 multiswitch enabling installations with up to 32 satellite receivers over a single cable based on digital channel stacking technology. Digital channel stacking technology applies digital signal processing after wideband Analog to Digital converters (full band capture) to select and reorder transponder channels.
The multiswitch supports both Dynamic and Static modes. In Dynamic mode (default), up to 32 EN50607-compatible receivers (or up to 16 EN50494-compatible) connected over the Unicable output ports, can select their desired transponder and receive it over the respective User Band. In Static mode, the multiswitch outputs a fixed transponder-to-IF frequency mapping and can line up to 32 transponders (depending on the bandwidth of the desired transponders) over its Unicable output ports. This allows for an unlimited number of receivers to be connected to the switch making MDU installations substantially cheaper and simpler than ever before.
This multiswitch has 4 satellite inputs that can receive (and cascade) either 4 universal satellite IF bands (LV, LH, HV and HH) from one satellite feed, or 2 wideband satellite IF signals (Horizontal and Vertical) from two satellite feeds. A unique feature of the multiswitch firmware allows to daisy chain two units and combine their outputs with external combiner to support connection of up to 4 wideband satellite IF signals from up to four satellite feeds. It also has a Terrestrial VHF/UHF input. The terrestrial signals are combined over both output ports of the multiswitch.
The Terrestrial signal is not amplified. The multiswitch has two outputs – by default, one of the ports is configured to function as a Unicable port in dynamic mode and the second is configured to function as Universal (Legacy) and switches to Unicable as soon as it receives an EN50494 or EN50607 command. The operating mode and configuration of each output port – unicable/universal, dynamic/static – output power level, channel bandwidth, UB numbers and protocol, center frequencies and the functionality of each of the output ports are fully programmable through Inverto?s Unicable II Programmer device and PC software tool.
The multiswitch is powered over the supplied AC/DC adapter and power inserter device allowing greater flexibility in various installation scenarios. The communication protocol between the multiswitch unit and the connected receivers is based on EN50494 and/or EN50607 and can be defined per User Band allowing operators to support installations consisting of both EN50494-only and EN50607-compatible Next Generation PVRs and HGWs.
Specifications
Inverto IDLU-UWT110-CUO1O-32P
Frequency range: satellite Quattro LNB: 950 MHz ~ 2150 MHz (default)
Wideband LNB: 300 MHz ~2350 MHz
Frequency range: terrestrial 47 MHz ~ 862 MHz
Inputs 4x IF inputs:
– for 1x Quattro LNB (default)
– or 2x Wideband LNBs
1x UHF/VHF input for terrestrial antenna
Outputs 4x Loopthrough satellite IF outputs
1x Loopthrough terrestrial output1x Unicable II (dCSS/EN50607) output, dynamic
(default) or statis mode, supporting up to 32 UBs.
With combined terrestrial signal.1x Universal (Legacy) by default upon power up, auto switch
to Unicable II? upon receiving EN50494/EN50607 command.?
With combined terrestrial signal
Input power range -50 dBm ~ -15 dBm
Output signal level (AGC) Configurable (default -25 dBm)
RF isolation: satellite/terretsrial (input) 25 dB min.
RF isolation: satellite/satellite (input) 25 dB min.
RF isolation: satellite ch/ch (UBs, output) 28 dB min.
Loop-through loss: satellite 3 dB max.
Loop-through loss: terrestrial 3 dB max.
Gain: Unicable II? (dCSS) output (out of AGC) 25 dB min.
Gain: legacy (universal) output 10 dB min.
LO phase noise @ 1 kHz -80 dBc/Hz max.
LO phase noise @ 10 kHz -92 dBc/Hz max.
LO phase noise @ 100 kHz -96 dBc/Hz max.
LO phase noise @ 1 MHz -104 dBc/Hz max.
Integrated phase noise 1.5? max.
Control protocols DiSEqC 1.x/DiSEqC 2.0, EN50494/EN50607
Legacy port switching V/L => 13 V/0 kHz , V/H =>13 V/22 kHz
H/L => 18 V/0 kHz , H/H => 18 V/22 kHz
Input/Output impedance 75 ? (F-type)
LNB power supply 300 mA max. @ 13 VDC ~ 18 VDC
Power consumption 500 mA @ 13 VDC max.
Working temperature -20 ?C ~ +60 ?C
IP protection IP54
Product dimensions (W x D x H) 11.35 cm x 11.05 cm x 20.8 cm
Weight 165 g
Unicable II? (dCSS) port specifications
User band (channel) bandwidth Configurable, 10 MHz ~ 80 MHz (default 30MHz)
User band (channel) gain ripple 3 dB max.
User band (channel) frequencies Configurable; Default 32 User bands:
? CH1: 1210MHz (EN50494+EN50607)
? CH2: 1420MHz (EN50494+EN50607)
? CH3: 1680MHz (EN50494+EN50607)
? CH4: 2040MHz (EN50494+EN50607)
? CH5: 984MHz (EN50494+EN50607)
? CH6: 1020MHz (EN50494+EN50607)
? CH7: 1056MHz (EN50494+EN50607)
? CH8: 1092MHz (EN50494+EN50607)
? CH9: 1128MHz (EN50607)
? CH10: 1164MHz (EN50607)
? CH11: 1256MHz (EN50607)
? CH12: 1292MHz (EN50607)
? CH13: 1328MHz (EN50607)
? CH14: 1364MHz (EN50607)
? CH15: 1458MHz (EN50607)
? CH16: 1530MHz (EN50607)
? CH17: 1530MHz (EN50607)
? CH18: 1566MHz (EN50607)
? CH19: 1602MHz (EN50607)
? CH20: 1638MHz (EN50607)
? CH21: 1716MHz (EN50607)
? CH22: 1752MHz (EN50607)
? CH23: 1788MHz (EN50607)
? CH24: 1824MHz (EN50607)
? CH25: 1860MHz (EN50607)
? CH26: 1896MHz (EN50607)
? CH27: 1932MHz (EN50607)
? CH28: 1968MHz (EN50607)
? CH29: 2004MHz (EN50607)
? CH30: 2076MHz (EN50607)
? CH31: 2112MHz (EN50607)
? CH32: 2148MHz (EN50607) -
Add to cartHome amplifier “F” 3 outputs (2 + TV): VHF / UHF – Auto LTE Amplifier housing 3 outputs (2 + TV) with automatic level adjustment, to expand the domestic terrestrial television network. The TV output offers a lower gain to be connected directly to the TV (without installing a socket). It incorporates Auto LTE filtering …
Housing Amplifier Auto-LTE 1e/(2s+TV) F 47…694/782MHz G…Read More
-
Add to cartOur range of FiberKom? includes units which operate in different return channel bands and/or modules that comprise one or two fibres
-
Add to cartTriax TMS 9X12P is a 12-way switch for distribution of the 2-position satellite IF signal. The switch can be used individually in efficient systems and at low cost.
Features
Multiswitch 8 polarities SAT + 1 Terrestrial. 12 Outputs
Integrated power supply
Specifications
ORDER INFORMATION
EAN Number 5702663003422
CHARACTERISTICS
Max. output level SAT @ -35 dB IMD3 100 dB?V
Max. output level TER @ -60dB IMD3 83 dB?V
Switch commands 13/18 V, 0/22 kHz, DiSEqC 1.0
FREQUENCY
Frequency range SAT 950-2150 MHz
Frequency range TER 47-862 MHz
GAIN
Gain – SAT (with 5 dB slope) 0 dB
Gain – TER [47-862 MHz] 4.0 dB
ISOLATION
Isolation cross polarisation H/V 25 dB
Isolation out-out SAT 30 dB
Isolation out-out TER 28 dB
Isolation SAT to TER 30 dB
Isolation TER to SAT 30 dB
RETURN LOSS
Return loss SAT inputs 10 dB
Return loss SAT outputs 10 dB
Return loss TER inputs 12 dB
Return loss TER outputs 10 dB
ELECTRICAL
Impedance 75 ?
OPERATIONAL
DC Operating voltage 15.0 ? 1.0 VDC
Max. current pass per F-connector 1000 mA
Temperature range 0…+55 ?C
CONNECTORS
Colourcoding of IF and TER inputs VL=Black, VH=Red, HL=Green, HH=Yellow
Connector Type F-female
Number of outputs 9
Number of trunk inputs 8 SAT, 1 TER
Number of trunk outputs 8 SAT, 1 TER
Subscriber outputs 12
MECHANICAL
Product Depth 103 mm
Packaging Depth 0,495 m
Packaging Height 0,085 m
Total Weight 2,022 kg
Packaging Width 0,145 m
Net Weight 1,778 kg
Packing QTY 1
Tara Weight 0,244 kg
Packaging Volume 0,006 m3
Product Width 459 mm
Product Height 71 mm -
Add to cartThe IDLU-UST110-CUO1O-32P is a small form factor Unicable2 multiswitch enabling installations with up to 32 satellite receivers over a single cable based on digital channel stacking technology. Digital channel stacking technology applies digital signal processing after wideband Analog to Digital converters (full band capture) to select and reorder transponder channels. Compared with analog channel stacking, which is based on analog frequency translation to fixed frequency slots, the digital channel stacking implementation removes the need of in-band SAW filters, offers a full flexibility of channel selection, supports many more set top boxes through a single coax cable, greatly simplifies installations at subscribers homes all at much lower cost and lower power consumption.
Controlled by the connected receivers over EN50494 or EN50607 protocol, the multiswitch will select the desired transponder channel, convert its frequency to the respective User Band frequency and stack it over the Unicable output ports through Digital to Analog converter (also known as ?Dynamic? mode).
The multiswitch firmware can be configured to deliver a fixed transponder-to-IF frequency mapping (also known as ?Static? mode) and line up to 32 transponders (depending on the bandwidth of the desired transponders) over the Unicable output ports. This allows for an unlimited number of receivers to be connected to the switch making MDU installations substantially cheaper and simpler than ever before. The operation mode – dynamic or static – output power level, channel bandwidth, UB numbers, center frequencies and the functionality of each of the output ports can all be programmed as well.
The multiswitch receives (and cascades) 4 satellite IF bands/polarities (LV, LH, HV and HH) and Terrestrial VHF/UHF signals. Both Unicable and Legacy output ports combines the Terrestrial signal. The Terrestrial signal is not amplified. The multiswitch is powered over the supplied AC/DC adapter and power inserter device allowing greater flexibility in various installation scenarios. The communication protocol between the multiswitch unit and the connected receivers is based on EN50494 and/or EN50607 and can be defined per User Band allowing operators to support installations consisting of both EN50494-only and EN50607 compatible Next Generation PVRs and HGWs.
For Indoor and outdoor installations.
?* Programmer not included, sold separately as an optional accessory.?
Specifications
Inverto IDLU-UST110-CUO1O-32P
Inputs 4 x Satellite IF inputs from Quattro LNB
? 1 x UHF/VHF input from Terrestrial antenna
? ?
Outputs? 4 x loopthrough satellite IF outputs
? 1 x loopthrough terrestrial output
? 1 x Legacy output with combined terrestrial signal.
? 1 x Unicable output with up to 32 User Bands with combined terrestrial signal
? ?
Control Protocol? DiSEqC1.x/DiSEqC2.0, EN50494/EN50607
Inputs frequency range: Satellite? 950 ~ 2150 MHz
Terrestrial 47 ~ 862 MHz
? ?
Loop-through loss: Satellite?? 3 dB max.
Terrestrial 3 dB max.
? ?
Conversion gain: Unicable output??? 25dB min
Legacy universal output -1 to +7 dB
? ?
Output signal level (AGC controlled) Configurable (default -25dBm)
Input power range -50 to -15 dBm
User band (Channel) bandwidth Configurable, 10~80MHz (default 30MHz)
User band (Channel) gain ripple 3 dB max.
User band frequencies (Channels) Configurable;
? Example of 32 User bands: CH0: 1210MHz (EN50494+EN50607)
? CH1: 1420MHz (EN50494+EN50607)
? CH2: 1680MHz (EN50494+EN50607)
? CH3: 2040MHz (EN50494+EN50607)
? CH4: 984MHz (EN50494+EN50607)
? CH5: 1020MHz (EN50494+EN50607)
? CH6: 1056MHz (EN50494+EN50607)
? CH7: 1092MHz (EN50494+EN50607)
? CH8: 1128MHz (EN50607)
? CH9: 1164MHz (EN50607)
? CH10: 1256MHz (EN50607)
? CH11: 1292MHz (EN50607)
? CH12: 1328MHz (EN50607)
? CH13: 1364MHz (EN50607)
? CH14: 1458MHz (EN50607)
? CH15: 1494MHz (EN50607)
? CH16: 1530MHz (EN50607)
? CH17: 1566MHz (EN50607)
? CH18: 1602MHz (EN50607)
? CH19: 1638MHz (EN50607)
? CH20: 1716MHz (EN50607)
? CH21: 1752MHz (EN50607)
? CH22: 1788MHz (EN50607)
? CH23: 1824MHz (EN50607)
? CH25: 1896MHz (EN50607)
? CH26: 1932MHz (EN50607)
? CH27: 1968MHz (EN50607)
? CH28: 2004MHz (EN50607)
? CH29: 2076MHz (EN50607)
? CH30: 2112MHz (EN50607)
? CH31: 2148MHz (EN50607)
RF Isolation: ?
Satellite/Satellite IF 28 dB? min.
Satellite/Terretsrial 28 dB min.
Satellite Channel/Channel (UBs) 28 dB min.
? ?
LO phase noise @1 KHz: -80 max dBc/Hz
? @10 KHz: -92 max dBc/Hz
? @100 KHz: -96 max dBc/Hz
? @1 MHz: -104 max dBc/Hz
? ?
? ?
Integrated phase noise 1.5 degrees max.
Input / Output VSWR 2.5 : 1
Input / Output Impedance 75 ? (F-Type)
Legacy port switching? V/L=>13V/0kHz , V/H=>13V/22kHz
? H/L=>18V/0kHz , H/H>18V/22kHz
LNB power supply 13/18V, max 300mA
DC Power consumption 450mA @13Vdc [max.]
Working Temperature – 20 ~ + 60 ?C
Dimensions 113.50 x 110.50 x 20.80(H x W x D) mm
Reviews
There are no reviews yet.