Central T.0X Televes
KSh66,776.00
T.0X AMPLIF. 47…862MHz G44dB Vs120dB?V Televes 5575. Low distortion of second and third order that allow high output voltage (typical values of 120 dB?V). It has two signal inputs. Equipped with test output.
High power amplifier for the signals processed in a T.0X headend.
Features
Low distortion of second and third order allowing high
output voltage (typical values of 120dB?V).
Features two inputs, which allows mixing of channels processed from its own headend and channels from other sources.
Test output.
Specifications
Reference 5575
?RF INPUT ?Frequency range ?MHz ?47…862
Noise figure dB < 11
Return losses dB > 10
Impedance ? 75
?
?RF OUTPUT Frequency range ?MHz ?
Gain ?dB ?
Output level ?DIN45004B ?dB?V ?
?42 CH Cenelec ?dB?V ?
Gain regulation ?dB ?
Return losses ?dB ?
Impedance ?? ?
?
?GENERAL ?Powering voltage ?Vdc ?
?Consumption (max.) ?mA ?
?Ingress protection ?IP ?
?Dimensions (W x H x D) ?mm ?
DATA SHEET
Related products
-
Add to cartHigh-power multiband amplifier with multiple controls on the front end, which design uses components that minimize the total noise figure. Equipped with 3 inputs (FM-BIII-UHF).
Equipped with LTE700 Ready filtering.
RED compliant
Highlights
Separate amplification minimizes intermodulation between bands and provides high output levels
Designed using Push-Pull technology, which guarantees levels in the 123 dB?V range for terrestrial signals.
Includes a high-performance low-power consumption switch-mode power supply
High-screening Zamak chassis The design facilitates appropriate cooling
Features
Switch for pre-amplifier or BOSS system powering
Switched configurable gain (high/low), and high output level
Intuitive front cover, including adjustments and block diagram
Output signal LED indicator
Specifications
Bands UHF BIII FM
Frequency margin Mhz 470 … 694 174 … 370 88 … 108
Gain 0 dB 42 42 25
10 32 32 25
Gain margin (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20
Max. output level IMD3 (2 tones,-35 dB) dB?V (dBmV) 125 (65)
DIN 45004B 123 (63)
IMD3 (2 tones,-60 dB) 120 (60)
IMD2 (2 tones,-60 dB) – 122 (62) –
Noise figure dB 5 5 6
Test -20
Powering inputs V= 12
Max. current inputs mA 50
Mains voltage / frequency V~ / Hz 120 … 230 / 50-60
Total AC consumption OFF W / mA 5,8 / 120
ON W / mA 8,2 / 157
Protection level IP 20
Operating temperature range ?C (?F) -5 … +45 (23 … 113) -
MicroKom Amplifier Return Channel + MATV 1e/1s “F”:…
KSh49,862.00Add to cartClass 4 line amplifier, designed for the distribution of multimedia services in small or medium-sized buildings. They are characterized by offering adjustments through insertable jumpers in both the direct and return channels. The gain on the direct channel is 20/25dB, and the return channel can be passive or active (20dB).
-
Add to cartDTKom serie launch and distribution amplifier is designed to CATV operators and is suitable with DOCSIS settings thanks to his expanded band witdh. It has a switching-mode return patch (active or passive) so this can be used in CoaxData networks.
-
MicroKom Amplifier Return Channel + MATV 1e/1s “F”:…
KSh56,598.00Add to cartClass 4 line amplifier, designed for the distribution of multimedia services in small or medium-sized buildings. They are characterized by offering adjustments through insertable jumpers in both the direct and return channels. The gain on the direct channel is 30/35dB, and the return channel can be passive or active (28dB).
-
DTKom broadband multiband amplifier 5 inputs:…
KSh79,264.00Add to cartHigh-power multiband amplifier with multiple controls on the front end, which design uses components that minimize the total noise figure. Equipped with 5 inputs (FM-BIII-21…36-38…48-UHF). The UHF band is divided in 2 of the inputs, which is useful in two-repeater reception installations since it allows an appropriate filtering of the channels for each of them.
Equipped with LTE700 filtering.
RED compliant
Highlights
Separate amplification minimizes intermodulation between bands and provides high output levels
Designed using Push-Pull technology, which guarantees levels in the 123 dB?V range for terrestrial signals.
Includes a high-performance low-power consumption switch-mode power supply
High-screening Zamak chassis The design facilitates appropriate cooling
Features
Switch for pre-amplifier or BOSS system powering
Switched configurable gain (high/low), and high output level
Intuitive front cover, including adjustments and block diagram
Output signal LED indicator
Specifications
Bands UHF BV BIV BIII FM
Frequency margin MHz 470 … 694 606 … 694
(Ch38…48) 470 … 598
(Ch21…36) 174 … 370 88 … 108
Gain 0 dB 42 41(1) 41(2) 42 25
10 32 31(1) 31(2) 32 25
Gain margin (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20
Max. output level IMD3 (2 tones,-35 dB) dB?V
(dBmV) 125 (65)
DIN 45004B 123 (63)
IMD3 (2 tones,-60 dB) 120 (60)
IMD2 (2 tones,-60 dB) – – – 122 (62) –
Noise figure dB 10 10 10 5 6
Test -20
Powering inputs V= 12
Max. curent inputs mA 50
Mains voltage /frequency V~ / Hz 120 … 230 / 50-60
Total AC consumption OFF W / mA 5,8 / 120
ON W / mA 9,6 / 180
Protection level IP 20
Operating temperature range ?C (?F) -5 … +45 (23 … 113)(1) G(Ch38)=37/27dB
(2) G(Ch36)=38/28dB
Reviews
There are no reviews yet.